ICP DAS USA EIP-2000 Series Bedienungsanleitung

EIP-2051 Quick Start Guide

EIP-2051

Screw Driver

EIP-2051 Quick Start Guide

The package includes the following items:

Install EIP-2000 Utility:

The software is located at:

Fieldbus_CD:\EtherNetIP\remote-io\EIP-2051\Utility

Quick Start Guide

(This Document)

For EIP-2000 Series

English/ February 2013/ Version 1.0

What’s in the shipping package?

Installing software on your PC

EIP-2051 Quick Start Guide

1. Make sure your PC has workable network settings.

2. Disable or well configure your Windows firewall and anti-virus firewall first, else the

“Network Scan”on step 4 may not work. (Please contact with your system Administrator)

3. Check FW/OP DIP switch if it is on OP position.

4. Connect both the EIP-2000 and your computer to the same sub network or the same

Ethernet switch, and power the EIP-2000 on.

Connecting the Power and PC

EIP-2051 Quick Start Guide

5. I/O connector –EIP-2051

6. I/O Wire Connection

20-pin Spring-type terminal connecter

Description

DI.COM

DI7

DI15

DI6

DI14

DI5

DI13

DI4

DI12

DI3

DI11

DI2

DI10

DI1

DI9

DI0

DI8

Dry.GND

EIP-2051 Quick Start Guide

1. Double click the “EIP-2000 Utility”shortcut on the desktop.

2. Click the “Network Scan” button to search your EIP-2000 modules.

3. Click the EIP-2051 or other EIP-2000 modules on the device list below to open the

configuration dialog of EIP-2000. Each EIP-2000 module has its own configuration

interface.

4. You can observe the DI status with the green circles which is showed on the Digital Input

field.

Using the EIP-2000 Utility

EIP-2051 Quick Start Guide

5. If the network settings have been changed, please click the “Update Network Settings”

button to update the configuration and reboot the module.

6. Configuration settings of EIP-2000

Network Settings

Item

Settings (default)

192.168.255.1

Gateway

192.168.0.1

Mask

255.255.0.0

For configuration of the Address Type, Static IP Address, Subnet Mask and Default Gateway of the EIP-2000.

Please refer to section “4.2.1 Network Settings”

LED Indicator

LED

LED Status

Description

Power LED

Always On

Module is in Run mode.

Flashing

Module is in Init mode.

Status LED

Always On

EtherNet/IP connection is failed.

Blink per second

EtherNet/IP connection is successful.

Blink per 300 ms

EtherNet/IP disconnected during communication but still in Safe-Delay time.

Blink per 100 ms

Module is about to reboot.

I/O status LED

The DI is activated.

Off

The DI is inactivated.

For configuration of the Power On Value, Safe Value, Safe Delay for the EIP-2000. Please refer to section “4.2.2

Digital Settings”

EIP-2051 Quick Start Guide

1. Open RSLogix 5000 and create a new project.

Figure5-1. Create a new project.

2. Select the PLC type and give the project a name.

Figure5-2. Set the PLC type and project name.

How to connect with Allen-Bradley PLC？

EIP-2051 Quick Start Guide

3. Create a new module in the “Ethernet”item.

Figure 5-3. Create a new module.

4. Select the “ETHERNET-MODULE”below “Communications”in the Select Module

window.

Figure5-4. Select “ETHERNET-MODULE”.

EIP-2051 Quick Start Guide

5. Configure the new module parameters. The I/O length of new module must be the same with

the length of EIP-2051 I/O data(Table 5-1). The input data size is 66 bytes and output data

size is 2 bytes. The instance ID please refer to Table 5-2.

Figure5-5. The settings of EIP-2051 module

Table 5-1. Data Assembly of EIP-2051

Data

Assembly

Byte count

Description

Input

Assembly

1st Byte: DI status(DI0~DI7).

2nd Byte: DI status(DI8~DI15).

3rd~65th Byte: DI counters.

Output

Assembly

1st Byte: to set DI counters zero (DI0~DI7).

2nd Byte: to set DI counters zero (DI8~DI15).

Table 5-2. Instance ID table of EIP-2000

Implicit Message Information of EIP-2000

Instance

Instance ID

Data length

Input(T->O)

65hex(101)

Depends on modules. e.g.66

Out(O->T)

66hex(102)

Depends on modules. e.g.2

Configuration

64hex(100)

Andere Handbücher für EIP-2000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ICP DAS USA Steuereinheit Handbücher

ICP DAS USA

ICP DAS USA I-8026W Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7051 Bedienungsanleitung

ICP DAS USA

ICP DAS USA PET-AR400 Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-8124W Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7060 Bedienungsanleitung

ICP DAS USA

ICP DAS USA DS-700 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7088 Bedienungsanleitung

ICP DAS USA

ICP DAS USA PROFIBUS PROFI-2510 Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7188XA Bedienungsanleitung

ICP DAS USA

ICP DAS USA WISE-5801-MTCP Bedienungsanleitung

ICP DAS USA

ICP DAS USA tET-P6 Bedienungsanleitung

ICP DAS USA

ICP DAS USA PDS-220F Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA ZT-2055 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-P3R3 Bedienungsanleitung

ICP DAS USA

ICP DAS USA GPS-721-MRTU Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-87P2 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-7083 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ZT-2570 Bedienungsanleitung

ICP DAS USA

ICP DAS USA IR-712A Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-2200 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7016D Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7053D Bedienungsanleitung

ICP DAS USA

ICP DAS USA SG-785 Bedienungsanleitung

ICP DAS USA

ICP DAS USA M-7002 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung