Icron USB Rover 1300 Bedienungsanleitung

USB Rover 1300

User Guide

Featuring ExtremeUSB™ Technology

USB Rover 1300

Thank you for purchasing the USB Rover 1300. Please read this guide

thoroughly before installation.

This document applies to part numbers: 00-00067.

FCC Radio Frequency Interference Statement Warning

The USB Rover 1300 has been tested and found compliant with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when installed and operated in a commercial environment. The

USB Rover 1300 generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with this user guide, may cause

harmful interference to radio communications. Operation of the USB Rover

1300 in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

CE Statement

We, Icron Technologies Corporation, declare under our sole responsibility

that the USB Rover 1300, to which this declaration relates, is in conformity

with European Standard EN 55022/A1 Class B, and EN 55024.

IC Statement

This Class B digital apparatus complies with Canadian ICES-003.

Technologies Corporation, the Icron Technologies Corporation logo, and the

Icron Technologies Corporation products referred to herein are either the

trademarks or the registered trademarks of Icron Technologies Corporation.

All other trademarks are property of their respective owners. Icron

Technologies Corporation assumes no responsibility for errors that may

appear in this manual. Information contained herein is subject to change

without notice.

User Guide

Contents

Introduction................................................................................................ 1

Product Contents........................................................................................ 1

About the USB Rover 1300 ....................................................................... 2

Before You Begin ...................................................................................... 5

Installing the LEX Unit.............................................................................. 5

Installing the REX Unit.............................................................................. 5

Connecting the LEX Unit to the REX Unit................................................ 5

Checking the Installation............................................................................ 6

Connecting a USB Device ......................................................................... 6

Troubleshooting ......................................................................................... 7

Specifications............................................................................................. 9

Limited Hardware Warranty .................................................................... 10

Hardware Remedies ................................................................................. 10

Limitation of Liability.............................................................................. 10

Obtaining Warranty Service..................................................................... 11

Contacting Technical Support.................................................................. 11

USB Rover 1300

Notes

User Guide

Introduction

This manual is intended to assist IT professionals install the USB Rover

1300. The instructions in this guide assume a general knowledge of

computer installation procedures, familiarity with cabling requirements, and

some understanding of USB devices.

NOTE:Notes give additional information that could make installation

easier.

Product Contents

When you open your product for the first time you should find the following

items:

• USB Rover 1300 User Guide

• Local EXtender (LEX)

• Remote EXtender (REX)

• USB cable (2m long)

To complete the installation, you will also require the following items that

are not included with the product:

• USB compatible computer

• USB device

• Category 5 Unshielded Twisted Pair (UTP) cable with two RJ45

connectors (if using surface cabling),

OR,

Category 5 UTP cabling with two information outlets and two

Category 5 UTP patch cords with RJ45 connectors (if using

premise cabling)

NOTE: The maximum length of the Category 5 UTP cable, including patch

cords, must not exceed 100m.

USB Rover 1300

About the USB Rover 1300

The USB Rover 1300 incorporates Icron’s ExtremeUSB™ technology. This

technology breaks the five-meter distance barrier for the connection of USB

peripheral devices and allows users to enjoy the benefits of USB technology

beyond the desktop. With the USB Rover 1300, USB devices can be located

up to 100 meters from the host computer. In addition, the USB Rover 1300

can supply power to remote low-power and some high-power USB devices.

The product is composed of two individual units, the Local EXtender (LEX)

and the Remote EXtender (REX).

The LEX Unit

The LEX unit connects to the host computer using a conventional

USB cable.

Front View Rear View

1Host Port (USB Type B) 2Host LED (green)

3Link Port (RJ45)

4Link LED (yellow)

User Guide

The REX Unit

The REX unit connects to the USB device using a conventional USB

cable. The REX 130 unit allows you to connect one full speed USB

device.

Front View Rear View

1Device Port (USB Type A) 2Device LED (green)

3Link Port (RJ45)

4Link LED (yellow)

Network Cabling

The LEX and REX units are interconnected by up to 100 meters of

Category 5 Unshielded Twisted Pair (UTP) cabling. The UTP cabling

must have a straight-through conductor configuration, with no

crossovers, and must be terminated with 8-conductor RJ45 connectors

at both ends.

Category 5 cable

USB USB

LEX REX

cable cable

USB

device

computer

NOTE:Category 5 UTP cabling is the standard data communications cable

installed in most commercial and some residential buildings.

USB Rover 1300

USB Cables

USB cables have two distinct connectors. The Type A connector is used to

connect the cable from a USB device to the Type A port on a computer or

hub. The Type B connector is used to attach the USB cable to a USB device.

USB Type A

port USB Type A

connector

USB Type B

port

USB Type B

connector

Power Handling

Some USB devices are powered directly from the USB and do not require

individual power supplies. These devices are called bus-powered devices.

The USB Rover 1300 can provide power to these devices so they can be

operated remotely.

Bus-powered devices are further divided into low-power and high-power

categories. Low-power devices are allowed to draw up to 100 mA from the

USB. Typical examples include mice, joysticks, and keyboards without

hubs. High-power devices are allowed to draw up to 500 mA from the USB.

Typical examples include cameras and keyboards with hubs. To determine if

a device is high-power or low-power, consult the user documentation for the

device.

The USB Rover 1300 can supply sufficient power to support all low-power

devices and most high-power devices. Devices that place a very heavy power

drain on USB (>300 mA) are not supported. Most USB cameras operate well

within this power budget.

NOTE: Devices with their own power source are usually considered to be

low-power devices from a USB perspective and are thereby

compatible with the USB Rover 1300.

Compatibility

The USB Rover 1300 complies with USB 1.1 specifications governing the

design of full speed USB devices. However, Icron Technologies Corporation

does not guarantee that all full speed USB devices are compatible with the

USB Rover 1300.

User Guide

Before You Begin

Before you can install the USB Rover 1300, you need to prepare your site.

1. Determine where the host computer is to be located and set up the

computer.

2. Determine where you want to locate the USB device.

3. If you are using surface cabling, ensure you have enough Category 5

UTP cabling to connect the two locations.

If you are using premise cabling, ensure Category 5 UTP cabling is

installed between the two locations, with Category 5 information

outlets located near both the computer and the USB device.

Installing the LEX Unit

1. Place the LEX unit near the host computer.

2. Plug the Type B connector on the USB cable (included) into the Host

port on the LEX.

3. Plug the Type A connector on the USB cable into the USB port on

the computer.

Installing the REX Unit

1. Place the REX unit near the USB device.

Connecting the LEX Unit to the REX Unit

NOTE:To ensure proper operation, we recommend that only Category 5, or

better, Unshielded Twisted Pair (UTP) cabling be used to connect

the LEX unit to the REX unit. The UTP cabling must have a

straight-through conductor configuration with no crossovers, and

must be terminated with 8-conductor RJ45 connectors at both ends.

With Surface Cabling

1. Plug one end of the Category 5 UTP cabling (not included) into the

Link port on the LEX unit.

2. Plug the other end of the Category 5 UTP cabling into the Link port

on the REX unit.

USB Rover 1300

With Premise Cabling

1. Plug one end of a Category 5 patch cord (not included) into the

Link port on the LEX.

2. Plug the other end of the patch cord into the Category 5 information

outlet near the host computer.

3. Plug one end of the second Category 5 patch cord (not included)

into the Link port on the REX.

4. Plug the other end of the second patch cord into the Category 5

information outlet near the USB device.

NOTE: The maximum length of the Category 5 UTP cable, including patch

cords, must not exceed 100 meters.

Checking the Installation

1. Check that the Link LEDs on both LEX and REX are on.

Connecting a USB Device

1. Install any software required to operate the USB device. Refer to

the documentation for this device, as required.

2. Connect the USB device to the Device port on the REX.

3. Check that the Host LED on LEX is on.

4. Check that the Device LED on REX is on.

Inhaltsverzeichnis

Andere Icron Extender Handbücher

Icron

Icron RG2301 Bedienungsanleitung

Icron

Icron Raven 3124 LEX Bedienungsanleitung

Icron

Icron USB Ranger 2212 Bedienungsanleitung

Icron

Icron USB 2.0 RG2304GE-LAN Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2204 Bedienungsanleitung

Icron

Icron Raven 3204C Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2312 Bedienungsanleitung

Icron

Icron EL5200 Bedienungsanleitung

Icron

Icron Spectra 3022 Bedienungsanleitung

Icron

Icron 422 Bedienungsanleitung

Icron

Icron USB 2.0 RG2304 Bedienungsanleitung

Icron

Icron RG2304-LAN Bedienungsanleitung

Icron

Icron VU5200 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2324 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2304GE-LAN Bedienungsanleitung

Icron

Icron USB Ranger 110 Bedienungsanleitung

Icron

Icron USB Ranger 2201 Bedienungsanleitung

Icron

Icron 100 Bedienungsanleitung

Icron

Icron Ranger 2101 Bedienungsanleitung

Icron

Icron USB Rover 2850 Bedienungsanleitung

Icron

Icron EL3500 Bedienungsanleitung

Icron

Icron USB Ranger 2224 Bedienungsanleitung

Icron

Icron EL5363 Bedienungsanleitung

Icron

Icron USB 2.0 RG2304SP Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung