ICS Advent WINCOMM8/C Bedienungsanleitung

Model WINCOMM8/C

Product Manual

MANUAL NUMBER : 00750-903-2A

Page - iii

FOREWORD

This product manual provides information to install, operate and or program the referenced product(s)

manufactured or distributed by ICS Advent. The following pages contain information regarding the

warranty and repair policies.

Check our Web site (www.icsadvent.com) for technical information, manuals, and BIOS updates.

Technical assistance is also available at: 800-480-0044 (U.S.) or 858-677-0877 (international).

Customer Comments: If you experience any problems with this manual or just want to provide some

feedback, please send us a message using the online "Service Form" on our Web site (www.icsadvent.com)

under "Support." Detail any errors you find. We will correct the errors or problems as soon as possible and

post the revised manual in our online Support Library. Thank you.

The information in this document is provided for reference only. ICSAdvent does not assume any liability

arising from the application or use of the information or products described herein. This document may

contain or reference information and products protected by copyrights or patents and does not convey any

license under the patent rights of ICS Advent, nor the rights of others.

is a Registered Trademark of ICS Advent. All trademarks and registered trademarks are the property of

cation may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, elec-

tronic, mechanical, photocopying, recording , or otherwise, without the prior written permission of the pub-

lisher.

Page - iv

Shipments not in compliance with this Guarantee

and Limited Warranty Return Policy will not be ac-

cepted by ICS Advent.

Guarantee

A thirty day money-back guarantee is provided on all standard products sold. Special order products are

covered by our Limited Warranty, however they may not be returned for refund or credit. EPROMs,

RAM, Flash EPROMs or other forms of solid electronic media are not returnable for credit - but for

replacement only. Extended Warranty available. Consult factory.

Refunds

In order to receive a refund on a product for the purchase price, the product must not have been

damaged by the customer or by the common carrier chosen by the customer to return the goods and

the product must be returned complete (meaning all manuals, software, cables, etc.) within 30 days of

receipt and in an as-new and resalable condition. The Return Procedure must be followed to assure

prompt refund.

Restocking Charges

Product returned after 30 days, and before 60 days, of the purchase will be subject to a minimum20%

restocking charge and charges for any damaged or missing parts. Products not returned within 60

days of purchase, or products which are not in an as-new and re-saleable condition, are not eligible

for credit return and will be returned to the customer.

Limited Warranty

Effective April 1, 1998, all products carry a 2-year limited warranty. Within two years of purchase,

ICS Advent will repair or replace, at our option, any defective product. ICS Advent will service the

warranty for all standard catalog products for the first two years from the date of shipment.

Please note: The 2-year warranty may not apply to special promotion items. Please consult the factory for

warranty verification.

The limited warranty is void if the product has been subjected to alteration, neglect, misuse, or abuse; if any

repairs have been attempted by anyone other than ICS Advent or its authorized agent; or if the failure is

caused by accident, acts of God, or other causes beyond the control of ICS Advent or the manufacturer.

Neglect, misuse, and abuse shall include any installation, operation, or maintenance of the product other than

in accordance with the user’s manual.

No agent, dealer, distributor, service company, or other party is authorized to change, modify, or extend the

terms of this Limited Warranty in any manner whatsoever. ICS Advent reserves the right to make changes

or improvements in any product without incurring any obligation to similarly alter products previously

purchased.

Page - v

Return Procedure

For any Guarantee or Limited Warranty return, please contact ICS Advent's Customer Service at

800-480-0044 (U.S.) or 858-677-0877 (international) and obtain a Return Material Authorization (RMA)

Number. All product(s) returned to ICS Advent for service or credit must be accompanied by a Return

MaterialAuthorization (RMA) Number. Freight on all returned items mustbe prepaid by the customer who

is responsible for any loss or damage caused by common carrier in transit. Returns for Warranty must

include a Failure Report for each unit, by serial number(s), as well as a copy of the original invoice showing

date of purchase.

To reduce risk of damage, returns of product must be in an ICS Advent shipping container. If the original

container has been lost or damaged, new shipping containers may be obtained from ICS Advent Customer

Service at a nominal cost.

ICS Advent owns all parts removed from repaired products. ICS Advent uses new and reconditioned parts

made by various manufacturers in performing warranty repairs and building replacement products.

If ICS Advent repairs or replaces a product, its warranty term is not extended.

ICSAdvent will normally return your replacement or repaired items via Second DayAir. Overnight delivery

or delivery via other carriers is available at an additional charge.

Limitation of Liability

In no event shall ICS Advent be liable for any defect in hardware, software, loss, or inadequacy of data of

any kind, or for any direct, indirect, incidental, or consequential damages in connection with or arising out of

the performance or use of any product furnished hereunder. ICSAdvent liability shall in no event exceed the

purchase price of the product purchased hereunder. The foregoing limitation of liability shall be equally

applicable to any service provided by ICSAdvent or its authorized agent.

Some Sales Items and Customized Systems are not subject to the guarantee and limited warranty.

However in these instances , any deviations will be disclosed prior to sales and noted in the original invoice.

ICS Advent reserves the right to refuse returns or credits on software or special order items.

Page - vi

Advisories

Three types of advisories are used throughout the manual to stress important points or warn of potential

hazards to the user or the system. They are the Note, the Caution, and theWarning. Following is an example

of each type of advisory:

Note: The note is used to present special instruction, or to provide extra information which may

help to simplify the use of the product.

CAUTION!

A Caution is used to alert you to a situation which if ignored may cause injury or

damage equipment.

WARNING!

AWarningisusedtoalertyouofasituationwhichifignoredwillcauseseriousinjury.

Cautions and Warnings are accented with triangular symbols. The exclamation symbol is used in all cautions

and warnings to help alert you to the important instructions. The lightning flash symbol is used on the left

hand side of a caution or a warning if the advisory relates to the presence of voltage which may be of

sufficient magnitude to cause electrical shock.

Use caution when servicing any electrical component. We have tried to identify the areas which may pose

a Caution or Warning condition in this manual; however, ICS Advent does not claim to have covered all

situations which might require the use of a Caution or Warning.

You must refer to the documentation for any component you install into a computer system to ensure proper

precautions and procedures are followed.

Page - vii

Table of Contents

Chapter 1: Introduction ................................................................................................ 1

Overview ............................................................................................................................................... 1

What’sIncluded .................................................................................................................................... 1

FactoryDefaultSettings ....................................................................................................................... 1

Chapter 2: Card Setup ................................................................................................. 3

AddressSelection ................................................................................................................................ 3

“PAL”Addressing .................................................................................................................................. 4

IRQSelection ....................................................................................................................................... 4

InterruptMode Options ......................................................................................................................... 5

ClockModes ........................................................................................................................................ 6

BaudRatesandDivisorsfor the‘DIV1’ mode ........................................................................................ 6

Chapter 3: Installation .................................................................................................. 8

SoftwareInstallation.............................................................................................................................. 8

HardwareInstallation............................................................................................................................. 9

Chapter 4: Technical Description.............................................................................. 10

Features ..............................................................................................................................................10

InterruptStatusPort.............................................................................................................................10

DB-25ConnectorPinAssignments(DB-25Male) ................................................................................11

DB-9(EIA-574 DTE)(DB-9Male) .........................................................................................................11

DB-78Connector PinAssignments(DB-78 Female) ............................................................................12

Chapter 5: Specifications .......................................................................................... 13

EnvironmentalSpecifications................................................................................................................13

PowerConsumption.............................................................................................................................13

MeanTime BetweenFailures (MTBF) ..................................................................................................13

Physical Dimensions ...........................................................................................................................13

Appendix A - Troubleshooting .................................................................................... 14

Appendix B - Electrical Interface ................................................................................ 15

RS-232 ................................................................................................................................................15

Appendix C- Asynchronous Communications ......................................................... 16

Appendix D- Silk-Screen ............................................................................................. 17

Declaration of Conformity

Page - viii

List of Figures

Figure1: DIP-switchIllustration .................................................................................................................. 4

Figure 2: Headers E1 to E8 (IRQ15 selected)............................................................................................. 4

Figure3: Header E9and E10,NormalIRQ Mode ....................................................................................... 5

Figure4: Header E9and E10,SharedIRQ Mode ....................................................................................... 5

Figure 5: Header E9 and E10,Sharing IRQs with anotheradapter .............................................................. 5

Figure 6: Clocking Mode ‘Divide By 4’ ........................................................................................................ 6

Figure 7: Clocking Mode ‘Divide By 1’ ........................................................................................................ 6

Figure8: Asynchronous CommunicationsBit Diagram ..............................................................................16

Figure 9: Silk Screen Dimensions .............................................................................................................17

List of Tables

Table 1: Address Selection Table................................................................................................................ 3

Table 2: DB-25 Connector PinAssignments ..............................................................................................11

Table 3: DB-9 Connector PinAssignments ................................................................................................11

Table 4: DB-78 Connector PinAssignments ..............................................................................................12

Current Revision 2A

May 2001

ManualNumber:00750-903-2 Page1

Chapter 1: Introduction

Overview

The WINCOMM8/C provides the PC with eight RS-232 asynchronous ports. The WINCOMM8/C

allows for connection to any device utilizing the RS-232 electrical interface, such as modems, data-

entry terminals, and plotters.

What’s Included

The WINCOMM8/C is shipped with the following items. If any of these items are missing or

damaged, contact ICS Advent.

· WINCOMM8/C Serial I/O Adapter

· “Octopus” Cable providing eight DB-25 or DB-9 connectors

· I/O and Communication Documentation CD-ROM

· I/O and Communication Software "C" Series CD-ROM

Factory Default Settings

The WINCOMM8/C factory default settings are as follows:

To install the WINCOMM8/C using factory default settings, refer to the Installation section of this

manual.

#troPsserddAesaBQRI21E

1troP08254VID

2troP8825

3troP0925

4troP8925

5troP0A25

6troP8A25

7troP0B25

8troP8B25

ManualNumber: 00750-903-2Page2

WINCOMM8/CManual

For your reference, record installed WINCOMM8/C settings below:

The following table illustrates the port assignments for the Factory Default setting.

#troPsserddAesaBQRI21E

1troP

2troP

3troP

4troP

5troP

6troP

7troP

8troP

#troP#52-BDsserddAelpmaxE

11 0+esaB782-082

22 8+esaBF82-882

33 61+esaB792-092

44 42+esaBF92-892

55 23+esaB7A2-0A2

66 04+esaBFA2-8A2

77 84+esaB7B2-0B2

88 65+esaBFB2-8B2

ManualNumber:00750-903-2 Page3

Chapter 2: Card Setup

The WINCOMM8/C contains several jumper straps that must be set for proper operation.

Address Selection

The WINCOMM8/C occupies 64 I/O locations and can be addressed two different ways. If header

E11 is set to the “Switch” position, the WINCOMM8/C occupies 64 consecutive I/O locations and

the dip switch is used to set the base address for these locations. The starting address for these 64

I/O locations must be on a 64-byte boundary i.e.: Hex 200, 240, 280, or 2C0. Be careful when

selecting the base address as some selections conflict with existing PC ports. The following table

shows several examples that usually do not cause a conflict. Refer to Appendix A for common

address contentions.

Table 1: Address Selection Table

sserddA:gnitteSnoitisoPhctiwS

1234567

F31-001nOnOnOnOffOnOnO

FB1-081nOnOnOnOffOffOnO

F72-042nOnOnOffOnOnOffO

FB2-082nOnOnOffOnOffOnO

FF2-0C2nOnOnOffOnOffOffO

F33-003nOnOnOffOffOnOnO

F35-005nOnOffOnOffOnOnO

FB5-085nOnOffOnOffOffOnO

F351-0051ffOnOffOnOffOnOnO

FB51-0851ffOnOffOnOffOffOnO

Inhaltsverzeichnis

Andere ICS Advent PCI-Karte Handbücher

ICS Advent

ICS Advent ADIO1600 Series Bedienungsanleitung

ICS Advent

ICS Advent RB-24 Bedienungsanleitung

ICS Advent

ICS Advent DUAL232/AT Series Bedienungsanleitung

ICS Advent

ICS Advent ULTRA-485 Bedienungsanleitung

ICS Advent

ICS Advent PB751-AT Bedienungsanleitung

ICS Advent

ICS Advent WDT1000-P Bedienungsanleitung

ICS Advent

ICS Advent PCI-DIO48 Series Bedienungsanleitung

ICS Advent

ICS Advent AOB8/16 Bedienungsanleitung

ICS Advent

ICS Advent PCI-32REL Bedienungsanleitung

ICS Advent

ICS Advent PCI-ICOM485/4 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

Moxa Technologies

Moxa Technologies CP-102E Bedienungsanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung