IFM Electronic Efector 200 OPU200 Bedienungsanleitung

Operating instructions

optical fork sensor

OPU200

OPU200 / 00 02 / 2009

Contents

1 Preliminary note....................................................................................................3

1.1 Symbols used.................................................................................................3

2 Functions and features.........................................................................................3

3 Installation ............................................................................................................3

4 Operating and display elements...........................................................................3

5 Electrical connection.............................................................................................4

6 Setting..................................................................................................................5

6.1 Setting of the output function.........................................................................5

6.2 Sensitivity setting...........................................................................................5

7 Operation..............................................................................................................6

8 Maintenance, repair and disposal ........................................................................7

Preliminary note1

Symbols used1.1

►Instruction

> Reaction, result

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

Functions and features2

The optical fork sensor detects objects and materials without contact and indicates

their presence by a switching signal.

Installation3

T: transmitter; R: receiver

Secure the optical fork sensor (OPU...) to a bracket.►

Operating and display elements4

LED yellow1:

output function switch2:

sensitivity potentiometer3:

Electrical connection5

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electri-►

cal equipment must be adhered to.

Ensure voltage supply to EN 50178, SELV, PELV.►

The following indications apply if there is a UL listing mark on the product:

For use in NFPA 79 applications only. Adapters providing field wiring►

means are available from the manufacturer. Refer to manufacturers

information.

The device shall be supplied from an isolating transformer having a►

secondary Listed fuse rated

a) max 5 amps for voltages 0...20 Vrms (0...28.3 Vp) or

b) 100/Vp for voltages of 20...30 Vrms (28.3...42.4 Vp).

Disconnect power.►

Connect the unit as follows:►

Automatic PNP / NPN detection

DC PNP

L+

pin 1 = L+

pin 3 = L-

pin 4 = load

DC NPN

pin 1 = L+

pin 3 = L-

pin 4 = load

On power up, the unit detects automatically if the switching output is con-

nected to L- (= PNP) or to L+ (= NPN).

Setting6

Setting of the output function6.1

NO NC

A: cover; B: output function switch

Remove the cover (A).1.

Set the output function (NO/NC) via the switch (B) using a screwdriver.2.

Refit the cover (A).3.

Sensitivity setting6.2

The sensor is to switch when the object is detected

Set the setting potentiometer to the lowest sensitivity.►

Position the object to be detected in the detection►

zone.

Increase the sensitivity until the yellow LED lights.►

Remove the object from the detection zone.►

The yellow LED goes out. The setting operation is>

completed.

The sensor is not to switch when the object is detected

Set the setting potentiometer to the highest sensitivi-►

ty. The yellow LED is lit.

Position the object to be detected in the detection►

zone.

Reduce the sensitivity until the yellow LED goes out.►

Remove the object from the detection zone.►

The yellow LED is lit again. The setting operation is>

completed.

Operation7

Check whether the unit operates correctly.►

The yellow LED is lit when the output is switched.>

Maintenance, repair, disposal8

Keep the lens of the sensor free from soiling.►

For cleaning do not use any solvents or cleaning agents which could damage►

the lens.

After use dispose of the unit in an environmentally friendly way in accordance►

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at

www.ifm.com →Select your country →Data sheet direct:

Inhaltsverzeichnis

Andere IFM Electronic Zubehör Handbücher

IFM Electronic

IFM Electronic Efector 200 OL Series Bedienungsanleitung

IFM Electronic

IFM Electronic LR8300 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 250 Bedienungsanleitung

IFM Electronic

IFM Electronic LK1022 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 160 LR8300 Bedienungsanleitung

IFM Electronic

IFM Electronic efector180 IX50 Bedienungsanleitung

IFM Electronic

IFM Electronic TUV NORD Efector 110 GM701S Bedienungsanleitung

IFM Electronic

IFM Electronic efector 250 O2D2 Series Betriebsanleitung

IFM Electronic

IFM Electronic Efector500 PF2058 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector200 OGS50 Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 OI Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector150 Bedienungsanleitung

IFM Electronic

IFM Electronic PB7 Bedienungsanleitung

IFM Electronic

IFM Electronic EFECTOR 600 TW2000 Bedienungsanleitung

IFM Electronic

IFM Electronic SU7000 Bedienungsanleitung

IFM Electronic

IFM Electronic O5D10 series Bedienungsanleitung

IFM Electronic

IFM Electronic LR2750 Bedienungsanleitung

IFM Electronic

IFM Electronic ecomat100 CR2101 Anwendungshandbuch

IFM Electronic

IFM Electronic efector500 PC3 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector 200 OG laser Bedienungsanleitung

IFM Electronic

IFM Electronic efector200 OW Series Bedienungsanleitung

IFM Electronic

IFM Electronic LR7300 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

IFM Electronic

IFM Electronic O1D106 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Bedienungsanleitung

IFM Electronic efector 200 OPU200 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken