IFM Electronic Efector150 Bedienungsanleitung

Operating instructions

Capacitive sensors

704032/01 12/2007

Contents

1 Safety instructions ........................................................................ 3

2 Functions and features................................................................. 4

3 Installation .................................................................................... 4

3.1 Notes on flush and non-flush installation................................... 4

4 Electrical connection..................................................................... 5

4.1 Wiring ........................................................................................ 5

5 Operating and display elements................................................... 5

6 Operating modes.......................................................................... 6

6.1 Adjustment................................................................................. 6

7 Operation...................................................................................... 6

8 Maintenance, repair and disposal................................................. 6

9 Terms............................................................................................ 7

Preliminary note

Operating elements are indicated as follows:

Example: [OUT OFF] = pushbutton "OUT OFF"

An instruction is indicated by "►":

Example: ►Check whether the unit operates correctly.

A reaction to the action is indicated by ">":

Example: > yellow LED lights.

1 Safety instructions

Please read the product description prior to set-up of the unit. Ensure that the

product is suitable for your application without any restrictions.

The unit conforms to the relevant regulations and EC directives.

Improper or non-intended use may lead to malfunctions of the unit or to

unwanted effects in your application.

That is why installation, electrical connection, set-up, operation and

maintenance of the unit must only be carried out by qualified personnel

authorised by the machine operator.

•

2 Functions and features

The capacitive sensor detects without contact metals, almost all plastics,

glass, ceramics, wood and paper and indicates their presence by providing a

switched signal.

Not suited for level detection.

3 Installation

3.1 Notes on flush and non-flush installation

Install the unit using the supplied nuts.

ﬂush

non ﬂush

Adhere to the minimum distances when mounting several sensors of the same

type

•

►

3xs

1xs

3xd3xd d

3xs

3x SnD3xDD

4 Electrical connection

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electrical

equipment must be adhered to.

Voltage supply to EN50178, SELV, PELV

Disconnect power.

Connect the unit.

4.1 Wiring

L+

positive switching (type...PKG...)

L+

negative switching (type ...NKG...)

5 Operating and display elements

LED

potentiometer

►

6 Operating modes

6.1 Adjustment

NO NC

place the target material in the safe

sensing range

LED is lit

►

place the target material in the safe

sensing range

LED goes out

►

decrease the sensing range

LED goes out

►

decrease the sensing range

LED is lit

►

increase the sensing range

LED is lit

►

increase the sensing range

LED goes out

►

Do not increase the sensing range beyond Sn.

7 Operation

Check whether the unit operates correctly. Bring about a sensor response by

taking suitable measures.

Display by LEDs:

LED yellow OFF: switching output disabled

LED yellow ON: switching output enabled

Do not operate units with high field intensity (e.g. walkie-talkies) at close range to

the sensor.

8 Maintenance, repair and disposal

The operation of the unit is maintenance-free. To ensure a correct function:

Keep the sensing face and a clear space, if any, free from deposits and foreign

bodies.

When removing the unit or changing the medium, a new adjustment might be

necessary.

It is not possible to repair the unit.

After use dispose of the unit in an environmentally friendly way in accordance with

the applicable national regulations.

•

9 Terms

Active zone / active face

Area above the sensing face in which the sensor reacts to the approach of the

target.

Output function

Normally open: Object within the active zone - output switched.

Normally closed: Object within the active zone - output blocked.

Programmable: Choice between normally closed or normally open.

Positive switching: Positive output signal (to L-).

Negative switching: Negative output signal (to L+).

Power-on delay time

The time the sensor needs to be ready for operation after application of the

operating voltage (in the millisecond range).

Hysteresis

The difference between the switch-on and the switch-off point.

Leakage current

Current for the internal supply of 2-wire units, also flows through the load when the

output is unswitched.

Current consumption

Current for the internal supply of 3-wire DC units.

Switch point drift

The shifting of the switch point owing to changes of the operating conditions (e.g.

temperature, pressure, air humidity).

Short-circuit protection

ifm sensors which are protected against excessive current by means of a pulsed

short-circuit protection. The inrush current of incandescent lamps, electronic relays

and low resistance loads may cause this protection to cut in and turn the sensor

off!

Operating voltage

The voltage range in which the sensor functions safely. A stabilised and smoothed

direct voltage should be used! Take into account residual ripple!

Technical data and further information at

www.ifm.com →Select your country →Data sheet direct:

Andere Handbücher für efector150

Inhaltsverzeichnis

Andere IFM Electronic Zubehör Handbücher

IFM Electronic

IFM Electronic VKV021 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 300 SU7000 Bedienungsanleitung

IFM Electronic

IFM Electronic efector100 ID503A Bedienungsanleitung

IFM Electronic

IFM Electronic LR2759 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 100 series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 OL Series Bedienungsanleitung

IFM Electronic

IFM Electronic PA32xx Series Bedienungsanleitung

IFM Electronic

IFM Electronic efectro 500 Bedienungsanleitung

IFM Electronic

IFM Electronic LR2750 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 OI Series Bedienungsanleitung

IFM Electronic

IFM Electronic LR2059 Bedienungsanleitung

IFM Electronic

IFM Electronic SB 4 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector 500 PI00 A Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 500 PN3 Bedienungsanleitung

IFM Electronic

IFM Electronic efector150 Bedienungsanleitung

IFM Electronic

IFM Electronic Efectorsod PE70 Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 300 Bedienungsanleitung

IFM Electronic

IFM Electronic efector200 OL Bedienungsanleitung

IFM Electronic

IFM Electronic efector150 Bedienungsanleitung

IFM Electronic

IFM Electronic LR8300 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 200 Bedienungsanleitung

IFM Electronic

IFM Electronic OGP Bedienungsanleitung

IFM Electronic

IFM Electronic efector 160 LR8300 Bedienungsanleitung

IFM Electronic

IFM Electronic O5E5 A Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Bedienungsanleitung