IFM Electronic Efector200 OGS50 Series Bedienungsanleitung

Operating instructions

Through-beam sensor

OGS50x

OGE50x

704071 / 01 02 / 2008

1 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

For the range see the type label.

2 Installation

transmitter receiver

Install the receiver (OGE...) and secure it to a bracket.►

Align the transmitter (OGS...) to the receiver and fix it.►

3 Electrical connection

Disconnect power.►

Connect the unit as follows.►

Transmitter

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

— — pin 4

— — pin 2

Core colours BN = brown, BU = blue, BK = black

Receiver

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

load BK pin 4

— — pin 2

Core colours BN = brown, BU = blue, BK = black

4 Operating and display elements

transmitter receiver

�

  

LED1:

[OUT off]2:

[OUT on]3:

4 Settings

4.1 The receiver is to switch when the object is detected

Position the object.►

receiver transmitter

Press [OUT on] for 2 s.►

The sensitivity is set to the object.>

The LED flashes.>

Remove the object.►

receiver transmitter

Press [OUT off].►

The sensitivity is set without object.>

The LED goes out. The programming is finished.>

4.2

The receiver is not to switch when the object is detected

Position the object (see figure 1) and press [OUT off] for 2►

Remove the object (see figure 2) and press [OUT on].►

The settings can also be carried out first without object (step 1) and then with

object (step 2).

4.3 Programming unsuccessful

LED flashes quickly, 8 Hz.>

Possible causes

Insufficient difference in measurements.•

Max. programming time of 15 min. exceeded.•

4.4 Setting of maximum sensitivity

Align the receiver so that no light is received.►

The receiver is to switch when the object is detected.

First press [OUT on] and then [OUT off].►

The receiver is to switch when the object is not detected.

First press [OUT off], then [OUT on].►

4.5 Locking or unlocking the buttons

The unit can be locked electronically to prevent unintentional settings.

Press [OUT on] and [OUT off] simultaneously for►

10 s.

Acknowledgement is indicated by a change of the>

LED status.

5 Operation

Check whether the sensors operate correctly.►

The receiver LED lights when the switching output is switched.>

6 Maintenance

Keep the lenses of the sensors free from soiling.►

For cleaning do not use any solvents or cleaning agents which could damage►

the plastic lenses.

Technical data and further information at www.ifm.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IFM Electronic Zubehör Handbücher

IFM Electronic

IFM Electronic efector160 LI51 Bedienungsanleitung

IFM Electronic

IFM Electronic Efectorsod PE70 Series Bedienungsanleitung

IFM Electronic

IFM Electronic SM7000 Bedienungsanleitung

IFM Electronic

IFM Electronic efector150 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 300 SA1000 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 100 GG711S Bedienungsanleitung

IFM Electronic

IFM Electronic O5E5 A Series Bedienungsanleitung

IFM Electronic

IFM Electronic EFECTOR 600 TW2000 Bedienungsanleitung

IFM Electronic

IFM Electronic SB 4 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector 200 OJ50 Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector150 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 300 SM6004 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 200 OIH5 Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 300 SM7050 Bedienungsanleitung

IFM Electronic

IFM Electronic GM705S Bedienungsanleitung

IFM Electronic

IFM Electronic efector200 OT Series Bedienungsanleitung

IFM Electronic

IFM Electronic efector100 GG507S Bedienungsanleitung

IFM Electronic

IFM Electronic PY2954 Bedienungsanleitung

IFM Electronic

IFM Electronic efector 200 OPU200 Bedienungsanleitung

IFM Electronic

IFM Electronic efector180 IX50 Bedienungsanleitung

IFM Electronic

IFM Electronic O1D155 Bedienungsanleitung

IFM Electronic

IFM Electronic LR8300 Bedienungsanleitung

IFM Electronic

IFM Electronic O1D105 Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 500 PP70 Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Bedienungsanleitung