IFM Efector 200 Series Bedienungsanleitung

Operating instructions

Through-beam sensor

OGE3xx / OGS3xx

704461 / 01 01 / 2009

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

Range: (→type label).

3 Installation

LED1:

Install the receiver (OGE3xx) and secure it to a bracket.►

Align the transmitter (OGS3xx) to the receiver and secure it in the same way.►

Maximum range only with accurate alignment.

4 Electrical connection

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electri-►

cal equipment must be adhered to.

Ensure voltage supply to EN 50178.►

Disconnect power.►

Connect the unit as follows:►

Transmitter (OGS3xx) connector

L+

pin 1 = L+

(pin 2: not connected)

pin 3 = L-

(pin 4: not connected)

Transmitter (OGS3xx) cable *

L+

BN = L+

BU = L-

Receiver (OGE3xx) connector

L+

pin 1 = L+

(pin 2 = not connected)

pin 3 = L-

pin 4 = load

Receiver (OGE3xx) cable *

L+

BN = L+

BU = L-

BK = load

* Core colours: BN = brown, BU = blue, BK = black

5 Operation

Check whether the unit operates correctly.►

Transmitter (OGS3xx): The green LED is lit when the sensor is ready for•

operation.

Receiver:•

Dark-on switching units (OGE-DPKG): the output is switched / the yellow LED

is lit when an object is detected.

Light-on switching units (OGE-HPKG): the output is switched / the yellow LED

is lit when no object is detected.

6 Maintenance, repair and disposal

Keep the front lenses of the sensor free from soiling.►

For cleaning do not use any solvents or cleaning agents which could damage►

the plastic material.

Technical data and further information at

www.ifm.com →Select your country →Data sheet direct:

Andere Handbücher für Efector 200 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IFM Zubehör Handbücher

IFM

IFM PM11 Bedienungsanleitung

IFM

IFM efector 160 LR3000 Bedienungsanleitung

IFM

IFM LX0020 Bedienungsanleitung

IFM

IFM Efector 200 Series Bedienungsanleitung

IFM

IFM O1D300 Bedienungsanleitung

IFM

IFM PQ3 Series Bedienungsanleitung

IFM

IFM OID20 Series Bedienungsanleitung

IFM

IFM TK61 Series Bedienungsanleitung

IFM

IFM Efector 200 O6E4 Bedienungsanleitung

IFM

IFM Efector 200 O5PG Bedienungsanleitung

IFM

IFM OMH551 Bedienungsanleitung

IFM

IFM OID20 Series Bedienungsanleitung

IFM

IFM OG Bedienungsanleitung

IFM

IFM PN72 Series Bedienungsanleitung

IFM

IFM SB4 Series Bedienungsanleitung

IFM

IFM UGT204 Bedienungsanleitung

IFM

IFM OY Series Bedienungsanleitung

IFM

IFM Efector 100 GG712S Bedienungsanleitung

IFM

IFM Efector 500 PNI02X Bedienungsanleitung

IFM

IFM efector200 OOF Series Bedienungsanleitung

IFM

IFM OGE7 Series Bedienungsanleitung

IFM

IFM OG Gebrauchs- und Pflegehandbuch

IFM

IFM O5E5 Series Bedienungsanleitung

IFM

IFM PM16 Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung