IFM OID20 Series Bedienungsanleitung

Operating instructions

Optical distance sensor

OID20x

80284285 / 00 04 / 2019

Contents

1 Preliminary note��3

1�1 Symbols used ��3

1�2 Warning signs used ��3

2 Safety instructions ��3

3 Functions and features ��5

3�1 Applications ��5

4 Installation��5

4�1 Installation conditions ��5

5 Electrical connection��5

6 Setting / Operation��6

7 IO-Link ��7

7�1 General information ��7

7�2 Device-specific information��7

7�3 Parameter setting tools��7

8 Maintenance, repair and disposal��7

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference�

Information

Supplementary note�

1.2 Warning signs used

WARNING

Warning of serious personal injury�

Death or serious irreversible injuries may result�

2 Safety instructions

• Please read this document prior to set-up of the unit� Ensure that the product is

suitable for your application without any restrictions�

• Improper or non-intended use may lead to malfunctions of the unit or to

unwanted effects in your application� That is why installation, electrical

connection, set-up, operation and maintenance of the unit must only be carried

out by qualified personnel authorised by the machine operator�

• In case of malfunction of the unit please contact the manufacturer� If the unit is

tampered with and/or modified, any liability and warranty is excluded�

• The unit conforms to the standard EN 61000-6-4� The unit may cause radio

interference in domestic areas� If interference occurs, the user must take

appropriate remedial actions�

WARNING

Visible laser light; laser protection class 2�

Use of controls or adjustments other than those specified herein may result in hazardous

radiation exposure� Damage to the retina is possible�

►Do not stare into the laser beam!

►Apply the enclosed labels (laser warning) in the immediate vicinity of the unit�

►Adhere to the caution and warning notes on the product label�

►Use the enclosed label for the power supply cable�

►EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014 complies with 21 CFR 1040

except for deviations pursuant to Laser Notice No� 50, dated June 2007

Label for supply cable

D-45128 Essen

Product label

OUT

OID2xxPOWER CLASS 2

LASER PRODUCT www.ifm.com TS AA 1301

3 Functions and features

The unit is used as an optical distance sensor�

3.1 Applications

• The optical distance sensor measures distances between 0�03 and 2 m�

• It has a background suppression of up to 20 m�

• The switching outputs are complimentary�

The distance between the sensor and the background must be limited

to max� 20 m by the customer� Otherwise the measured value may be

ambiguous. → 4.1 Installation conditions

4 Installation

4.1 Installation conditions

►Install the unit so that the object to be detected is within a measuring range of

0�03��2 m�

Any object between the set switch point and a distance of 20 m from the sensor is

suppressed�

Reflecting objects in the direct beam path of the sensor - also in the range

> 20 m – are to be avoided by the customer� Otherwise the measured

values may be ambiguous�

5 Electrical connection

The unit must be connected by a qualified electrician�

►The national and international regulations for the installation of electrical

equipment must be adhered to�

►Ensure voltage supply according to EN 50178, SELV, PELV�

►Disconnect power�

►Connect the unit as follows:

DC PNP

























4: OUT1 = normally open / IO-Link

2: OUT2 = normally closed

DC NPN

























4: OUT1 = normally open / IO-Link

2: OUT2 = normally closed

Core colours of ifm sockets:

1 = BN (brown), 2 = WH (white), 3 = BU (blue), 4 = BK (black)

6 Setting / Operation

OUT1

PNP

100 mA

PNP

OUT2

100 mA

1: Setting marks

2: Yellow LED: Set1 value reached, output = ON

3: Locking ring

4: Setting ring (manually adjustable after unlocking)

5: Green LED: supply voltage O�K�

• To obtain the setting accuracy: Set the ring to the maximum value, then set the

requested value�

►After mounting, wiring and programming check whether the unit operates correctly�

Lifetime of a laser diode: 50,000 hours

7 IO-Link

7.1 General information

This unit has an IO-Link communication interface which requires an IO-Link-

capable module (IO-Link master) for operation�

The IO-Link interface enables direct access to the sensor values and parameters

and provides the possibility to set the parameters of the unit during operation�

In addition communication is possible via a point-to-point connection with a USB

adapter cable�

You will find more detailed information about IO-Link at www�ifm�com�

7.2 Device-specific information

You will find the IODDs necessary for the configuration of the IO-Link unit and

detailed information about sensor values, diagnostic information and parameters

in the overview table at www�ifm�com�

7.3 Parameter setting tools

You will find all necessary information about the required IO-Link hardware and

software at www�ifm�com�

8 Maintenance, repair and disposal

Faulty sensors must only be repaired by the manufacturer�

►Keep the front lens of the sensor free from soiling�

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations�

►Do not try to open the module enclosure� There are no user-serviceable

components inside�

Technical data and further information at www�ifm�com

Inhaltsverzeichnis

Andere IFM Zubehör Handbücher

IFM

IFM O6H7 Series Bedienungsanleitung

IFM

IFM OF Series Bedienungsanleitung

IFM

IFM Efector 200 O5 Bedienungsanleitung

IFM

IFM O5H5xA Series Bedienungsanleitung

IFM

IFM O5P7 Series Bedienungsanleitung

IFM

IFM Efector 100 GG712S Bedienungsanleitung

IFM

IFM EC2061 Bedienungsanleitung

IFM

IFM efector 200 OGS38 Series Bedienungsanleitung

IFM

IFM efector 200 O4P2 Series Bedienungsanleitung

IFM

IFM UGT20 Series Bedienungsanleitung

IFM

IFM PT24 Series Bedienungsanleitung

IFM

IFM SBG2 Series Bedienungsanleitung

IFM

IFM LX Series Bedienungsanleitung

IFM

IFM MN7 S Series Bedienungsanleitung

IFM

IFM LK 022 Series Bedienungsanleitung

IFM

IFM Efector 200 Series Bedienungsanleitung

IFM

IFM LMT0 A Series Bedienungsanleitung

IFM

IFM SAxx04 Series Bedienungsanleitung

IFM

IFM IFS Series Bedienungsanleitung

IFM

IFM PI16 Series Bedienungsanleitung

IFM

IFM SB4 Series Bedienungsanleitung

IFM

IFM O5E7 Series Bedienungsanleitung

IFM

IFM TS502A Bedienungsanleitung

IFM

IFM OJ51 Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung