IFM Efector200 O6P2 Bedienungsanleitung

Operating instructions

Retro-reflective sensor

O6P2

O6P200 / 01 01 / 2015

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

In conjunction with a prismatic reflector or reflective tape the retro-reflective sen-

sor detects objects and materials without contact and indicates their presence by

a switching signal.

3 Installation

►Fit the prismatic reflector or the reflective tape behind the object to be detected.

►Align the retro-reflective sensor to it and secure it to a bracket.

Maximum range only with accurate alignment.

4 Operating and display elements

1: LED yellow - switching output active

2: Setting potentiometer „sensitivity“

3: LED green - operation, stability indication

4: Selector „output function“

4.1 Stability indication

The green LED is lit when the supply voltage is applied and there is sufficient

excess gain. Under these conditions the sensor receives a stable signal.

stable signal switch point stable signal

Light-on mode

LED green on off off on

LED yellow on on off off

Dark-on mode

LED green on off off on

LED yellow off off on on

5 Electrical connection

The unit must be connected by a qualified electrician.

►The national and international regulations for the installation of electri-

cal equipment must be adhered to.

►Ensure voltage supply to EN 50178.

►Disconnect power.

►Connect the unit as follows:

5.1 PNP

Connector M12 pigtail Cable *





















Connector M8 3-pin Connector M8 4-pin





















* Core colours: BN = brown, BU = blue, BK = black

5.2 NPN

Connector M12 pigtail Cable *

L+

Connector M8 3-pin Connector M8 4-pin

L+

* Core colours: BN = brown, BU = blue, BK = black

6 Settings

6.1 Set the output function

►Setting D: dark-on mode

►Setting L: light-on mode

6.2 Set the sensitivity

►Increase sensitivity: turn the setting

screw of the potentiometer clockwise.

►Decrease sensitivity: turn the setting

screw of the potentiometer anti-

clockwise.

7 Operation

►Check whether the unit operates correctly.

> The green LED is lit when the supply voltage is applied and there is sufficient

excess gain.

> Dark-on mode: the output is switched / the yellow LED is lit when an object is

detected.

> Light-on mode: the output is switched / the yellow LED is lit when no object is

detected.

8 Maintenance, repair, disposal

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic parts.

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at unter www.ifm.com

Inhaltsverzeichnis

Andere IFM Zubehör Handbücher

IFM

IFM KB Bedienungsanleitung

IFM

IFM Efector 200 OGH2 Series Bedienungsanleitung

IFM

IFM Efector 500 PI30 Bedienungsanleitung

IFM

IFM O4E5 Series Bedienungsanleitung

IFM

IFM Efector 200 OM Bedienungsanleitung

IFM

IFM efector 200 O4H5 Series Bedienungsanleitung

IFM

IFM GI854S Bedienungsanleitung

IFM

IFM efector200 OOF Series Bedienungsanleitung

IFM

IFM Efector 200 O4P5 Series Bedienungsanleitung

IFM

IFM Efector 500 PI2652 Bedienungsanleitung

IFM

IFM O6H7 Series Bedienungsanleitung

IFM

IFM O5P7 Series Bedienungsanleitung

IFM

IFM O1D100 series Bedienungsanleitung

IFM

IFM Ecomat 100 EC2082 Leitfaden

IFM

IFM Efector 200 O7P2 Series Bedienungsanleitung

IFM

IFM LR7009 Bedienungsanleitung

IFM

IFM O8H2 Bedienungsanleitung

IFM

IFM TS502A Bedienungsanleitung

IFM

IFM SBG2 Series Bedienungsanleitung

IFM

IFM PQ3 Series Bedienungsanleitung

IFM

IFM PK752 Series Bedienungsanleitung

IFM

IFM efector200 OM Bedienungsanleitung

IFM

IFM JD Series Anwendungshandbuch

IFM

IFM UGR500 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

IFM efector200 O6P2 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken