Interlogix TruVision Open Standards Bedienungsanleitung
TruVision IP Dome
Open-Standards Quick
Start Guide
P/N 1076512A-EN • REV 1.0 • ISS 07OCT11
Copyright © 2011 UTC Fire & Security. All rights reserved.
Trademarks and
patents
Interlogix, TruVision brand and logo are
trademarks of UTC Fire & Security.
Other trade names used in this document may
be trademarks or registered trademarks of the
manufacturers or vendors of the respective
products.
Manufacturer UTC Fire & Security Americas Corporation, Inc.
2955 Red Hill Avenue, Costa Mesa, CA
92626-5923, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, The Netherlands
FCC compliance This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Certification N4131
European Union
directives
12004/108/EC (EMC directive): Hereby, UTC Fire
& Security declares that this device is in
compliance with the essential requirements and
other relevant provisions of Directive
2004/108/EC.
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info.
Contact
information
See www.interlogix.com or
www.utcfssecurityproducts.eu.
Quick Start Guide 1 EN
Content
Graphics 2
Introduction 6
Package contents 6
Installation environment 6
Camera dimensions 6
Setting up the camera 7
Connecting the devices 7
Accessing the camera over the internet 8
Overview of the camera Web browser 9
Network and streaming configuration 10
Specifications 11
EN 2 Quick Start Guide
Graphics
Quick Start Guide 3 EN
EN 4 Quick Start Guide
Quick Start Guide 5 EN
EN 6 Quick Start Guide
Introduction
This pocket guide provides basic information on installing the TruVision
IP dome and wedge dome open-standard cameras.
For detailed information on installing and using the cameras, please
refer to the user manual.
Package contents
The camera is shipped with the following items:
Camera
Hex wrench
Mounting plate (excluding wedge dome cameras)
Video cable for testing (excluding wedge dome cameras)
Multilingual quick start guide
CD with user manual in several languages
Installation environment
Refer to the user manual for detailed information, but observe these
important requirements:
• Place the camera in a secure location.
• Ensure that the camera is in a well-ventilated area.
• Do not expose the camera to rain or moisture.
Camera dimensions
See Figure (Dome and IR dome cameras) and Figure (Wedge
dome cameras).
Quick Start Guide 7 EN
Setting up the camera
Note: If the light source where the camera is installed experiences
rapid, wide variations in lighting, the camera may not operate as
intended.
For detailed instructions, please refer to the user manual.
To quickly put the camera into operation:
1. Prepare the mounting surface.
2. Connect the required cables to the camera.
3. Mount the camera to the ceiling using the appropriate fasteners.
4. Set up the camera’s network and streaming parameters so that the
camera can be controlled over the network.
5. Program the camera to suit its location.
Connecting the devices
Dome cameras:
See Figure (Connections on the base of the dome and IR dome
cameras).
1. Ground. Connect to ground.
2. Ethernet RJ45 PoE port. Connect to network devices.
3. Audio output. Connect to an audio output. Line level, 600 Ω.
4. Initial set. Press to hard reboot camera.
5. Audio input. Connect to an audio input. 2.0 to 2.4 Vp-p, 1 kΩ.
6. RS-485 D+, D-. Connect to an RS-485 device such as a PTZ dome
camera.
7. Alarm outputs. Connect 1A/1B and 2A/2B to alarm output devices.
8. Alarm inputs. Connect IN1/GND and IN2/GND to alarm input
devices.
9. Power supply. Connect +12 VDC power supply.
EN 8 Quick Start Guide
Wedge dome cameras:
See Figure (Wedge dome camera connections).
1. Power input connector. Connect +12 VDC power supply. Optional.
2. Ethernet RJ45 PoE connector. Connect to the network devices.
3. Lens.
4. Power LED.
5. Lens positioning screws.
6. Network status LEDs.
7. Reset switch. Click to reset all parameters to factory default.
Accessing the SDHC card
Insert an SDHC card up to 32GB for local storage in the dome
cameras (see Figure , item ). The card is not supplied with the
camera.
Video and log files stored on the SDHC card can only be accessed via
the Web browser. You cannot access the card using TruVision
Navigator or a recording device.
Note: There is no SDHC card slot in the wedge dome cameras.
Accessing the camera over the internet
Use the camera Web browser to access and configure the camera
over the internet. Only one camera is accessible from a single Web
browser window.
To access the camera online:
1. In the Web browser enter the camera’s IP address (default is
192.168.1.70). The Login dialog box appears.
Note: Ensure that the Active X controls are enabled.
2. Enter your user name and password.
User name: admin
Password: 1234
Andere Handbücher für TruVision Open Standards
1
Dieses Handbuch passt für folgende Modelle
18
Inhaltsverzeichnis
Andere Interlogix Sicherheitskamera Handbücher
Interlogix
Interlogix TVD-5110-3 Bedienungsanleitung
Interlogix
Interlogix UltraView PTZ Bedienungsanleitung
Interlogix
Interlogix UVC-XP4DN-HR Bedienungsanleitung
Interlogix
Interlogix TruVision TVB-2401 Bedienungsanleitung
Interlogix
Interlogix UltraSync RS-3240 Bedienungsanleitung
Interlogix
Interlogix TruVision TVB-2101 Bedienungsanleitung
Interlogix
Interlogix TVB-5301 Bedienungsanleitung
Interlogix
Interlogix TruVision TVD-N210V-2-N(-P) Bedienungsanleitung
Interlogix
Interlogix TruVision TVA-1101 Bedienungsanleitung
Interlogix
Interlogix TruVision IP Dome Bedienungsanleitung
Interlogix
Interlogix TruVision TVT-2103 Bedienungsanleitung
Interlogix
Interlogix Ultra View UVD-6120VE-2 Bedienungsanleitung
Interlogix
Interlogix TVP-6102 Bedienungsanleitung
Interlogix
Interlogix TruVision TVD-5801 Bedienungsanleitung
Interlogix
Interlogix UVP-M1120P-18X-N Bedienungsanleitung
Interlogix
Interlogix TruVision TVD-2401 Bedienungsanleitung
Interlogix
Interlogix UVC-XP4DN-HR Bedienungsanleitung
Interlogix
Interlogix TruVision TVD-2401 Bedienungsanleitung
Interlogix
Interlogix UltraView PTZ Bedienungsanleitung
Interlogix
Interlogix TVW-1120 Bedienungsanleitung
