Intex ECO 7231 Bedienungsanleitung

249A

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

English

OWNER’S MANUAL

Cartridge Filter Pump &

Saltwater System

Model ECO 7221 220 – 230 V~, 50 Hz, 230 W

Hmax 3.0 m Hmin 0.19 m IPX4

Model ECO 7231 230 – 240 V~, 50 Hz, 230 W

Hmax 3.0 m Hmin 0.19 m IPX4

MAX. WATER TEMPERATURE 35oC

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for future

reference.

Don’t forget to try these other fine Intex products: pools,

pool accessories, inflatable pools and in-home toys, airbeds

and boats available at fine retailers or visit our website.

Due to a policy of continuous product improvement, Intex

reserves the right to change specifications and appearance,

which may result in updates to the instruction manual

without notice.

- Intex Recreation Corp.

vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous

licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen

Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box

28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union

by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/

Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

249-*A*-R0-1804

For illustrative purposes only.

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 2

Warnings............................................................................... 3

References............................................................................ 4-5

Product Information & Specifications................................ 6

Setup Instructions............................................................... 7-10

Salt & Pool Water Volumes..................................................11

Intex Pools Salt Table...........................................................12

Intex Pools Cyanuric Acid Table......................................... 13

Intex Pools Operating Time Table ......................................14

Non-Intex Pools Salt Table...................................................15

Non-Intex Pools Cyanuric Acid Table................................. 15

Non-Intex Pools Operating Time Table...............................15

Operating Instructions......................................................... 16-18

LED Code Chart................................................................... 19

Stationary Mounting............................................................ 20

Maintenance......................................................................... 21-24

Long Term Storage.............................................................. 24

Pool Maintenance and Chemical Definitions.................... 24-25

Troubleshooting Guide........................................................ 26-28

General Aquatic Safety....................................................... 29

Limited Warranty.................................................................. 30

TABLE OF CONTENTS

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 3

WARNING

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

• Always supervise children and those with disabilities.

• Children must stay away from this product and electrical cord(s).

•Children shall not play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision.

•This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved.

• Assembly and disassembly by adults only.

• The pump must be supplied through a residual current device (RCD) having a rated residual

operating current not exceeding 30 mA.

• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making

any adjustment to the product.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers,

hedge trimmers and other equipment.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter

plugs to connect unit to electric supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands are wet.

• Keep this product more than 2 m away from the pool.

•Keep this product more than 3.5 m away from the pool (for France only).

• Keep the plug of this product more than 3.5 m away from the pool.

• Position this product away from the pool, so as to prevent children from climbing on it and

accessing the pool.

• The pump must not be used when people are in the water.

• This product is for use with storable pools only. Do not use with permanently installed pools.

A storable pool is constructed so that it may be readily disassembled for storage and reassembled

to its original configuration.

• The appliance is intended only for household use.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE, ELECTRIC

SHOCK, ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.

These product warnings, instructions and safety rules provided with the product represent some

common risks of water recreation devices and do not cover all instances of risk and danger.

Please use common sense and good judgement when enjoying any water activity.

For portable Above-Ground-Pools only

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 4

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

" * ": Optional.

NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.

16 17 30

31 33

21 22 23 24

*36

21 22 23

*38

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 5

PARTS REFERENCE (continued)

Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.

REF. NO. DESCRIPTION QTY.

SPARE PART NO.

SMALL AGP LARGE AGP COMMON PARTS

1 AIR RELEASE VALVE/SEDIMENT RELEASE VALVE 2 10460

2 VALVE O-RING 2 10264

3 THREADED FILTER HOUSING COLLAR 1 10749

4 FILTER HOUSING COVER 1 10750

5 FILTER HOUSING O-RING 1 10325

6 FILTER CARTRIDGE (29000) 1

7 AIR RELEASE VALVE B (WITH O-RING) 1 10725

8 PUMP HOSE WITH NUTS 2 11010

WATER TRANSFER HOSE (WITH COLLAR AND 2 HOSE CLAMPS)

111583

10 SCREW 2 11519

11 FLOW SENSOR 1 11460

12 ELECTROLYTIC CELL NUT 2 11582

ELECTROLYTIC CELL HOUSING (O-RING C INCLUDED)

1 11906

14 SECONDARY ELECTROLYTIC CELL 1 11900

15 L-SHAPE O-RING 1 11228

16 O-RING C 1 10712

17 ANGLE JOINT (O-RING D INCLUDED) 1 11584

18 O-RING A 1 11587

19*

PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED)

2 10747

20* HOSE O-RING 2 10262

21* STEP WASHER 2 10745

22* STRAINER NUT 2 10256

23* FLAT STRAINER RUBBER WASHER 2 10255

24* THREADED STRAINER CONNECTOR 1 11235

25* ADJUSTABLE POOL INLET JET NOZZLE 1 12369

26* ADAPTOR B 2 10722

27*STRAINER CONNECTOR 1 11070

28*POOL INLET JET NOZZLE 1 12364

29*STRAINER GRID 1 12197

30 CELL COVER 1 11131

31 PRIMARY ELECTROLYTIC CELL 1 11899

32 TEST STRIPS 1 19635

33 TITANIUM ELECTRODE O-RING 2 11585

34 CONTROL STATION 1 11910

35 COLLAR NUT 1 11604

36* STRAINER GRID 1 12198

37* AIR JET VALVE 1 12363

38* INLET THREADED AIR CONNECTOR 1 12371

39* INLET STRAINER CONNECTOR 1 12365

40* POOL INLET AIR ADAPTOR 1 12368

41* AIR JET VALVE CAP (NOT SHOWN) 1 12373

" * ": Optional.

When ordering parts, be sure to quote the model number and part numbers.

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 6

This product is specially designed for above ground pools. It will destroy the bacteria, oxidize

bather organics and control algae, which provide you a safe, clean and comfortable swimming

pool.

Common salt (sodium chloride) is made up of two elements, sodium and chlorine. During the

installation of your Saltwater System/Filter Pump, a measured quantity of salt is dissolved in

the pool water to make it slightly salty. The pool water flows through the saltwater system’s

electrolytic cell (31) to produce HCLO. The HCLO dissolves in the water and instantly starts

destroying bacteria and algae. It also oxidizes all other organic materials.

The secondary electrolytic cell boosts the chlorination and sanitizing power for additional oxidation

of water contaminants.

HOW THE CHLORINE IS GENERATED

Wattage: 230 W

Ideal Salt Level: 3000 ppm (parts per million)

Maximum Chlorine Output/hour: 5 grams/hour

Secondary Cell Output Current: 500 mA

Type of filter medium: Synthetic cartridge #29000

PRODUCT SPECIFICATIONS

No tools are required for the assembly.

Flow Sensor

Secondary electrolytic

cell

Water Outlet

Electronic

Control Station

Primary

electrolytic cell

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 7

STRAINER & PLUNGER VALVE SETUP (optional)

IMPORTANT

The Saltwater System/Filter Pump must be installed as the last piece of pool equipment

in the water return line to the pool. This location extends the life of the titanium plates.

Strainer & Plunger Valve Setup (small AGP)

The strainer grid prevents large objects from jamming and/or damaging the filter pump.

The plunger valve assembly prevents water from flowing into the filter pump while the

filter cartridge is being placed or cleaned. If your pool has an inflatable top ring, install

the strainer, nozzle and plunger valve before inflating the pool liner top ring. The parts

numbers here onward, refer to the parts depicted in the Parts List section of this manual.

To install, do the following:

21 26

(Adaptor B) 27 29

21 26

(Adaptor B) 39 28

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 8

STRAINER & PLUNGER VALVE SETUP (optional)

The strainer grid prevents large objects from jamming and/or damaging the filter pump. If

your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before

inflating the pool liner top ring. The part numbers here onward refer to the parts depicted

in the Parts List section of this manual. To install, do the following:

1. In a counter-clockwise motion unscrew

plunger valve union from the threaded

strainer connector

(24) (see drawing 1).

Be careful not to lose the step rubber

washer

(21). Place the plunger valve on

the ground in a safe place.

2. In a counter-clockwise motion unscrew the

strainer nut

(22) from the threaded

connector

(24). Leave the flat washer (23)

on the connector (24).

3. Install the strainer and plunger valve at the

lower position of pool outlet (marked "+").

From the inside of the pool liner insert the

connector

(24) into one of the pre-cut holes

with the washer remaining on the

connector to be placed against the inside

of the liner wall.

4. Before assembly, lubricate the threads with

a petroleum jelly. Then, with the flat side of

the strainer nut (22) facing the outside wall

of the liner in a clockwise motion screw the

strainer nut

(22) back onto the threaded

connector

(24) (see drawing 2).

5. Finger tighten the strainer nut (22) onto the

threaded connector

(24).

6. Grasp the plunger valve assembly. Make

sure the step washer (21) is in place.

7. In a clockwise motion screw the plunger

valve union back onto the threaded

connector

(24) (see drawing 3).

8. In a clockwise motion turn the plunger

valve handle to close position. Ensure the

plunger valve is securely closed. This will

prevent water from flowing out during

filling of the pool (see drawing 4).

INSIDE

LINER WALL

INSIDE

LINER WALL

23 2422 36

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 9

NOZZLE & PLUNGER VALVE SETUP (optional)

INSIDE

LINER WALL

WATER

FLOW

POOL

23 38 25

INSIDE LINER

WALL

1. In a counter-clockwise motion unscrew plunger valve

union from the inlet threaded air connector (38)

(see drawing 5) Be careful not to lose the step

rubber washer

(21). Place the plunger valve on the

ground in a safe place.

2. In a counter-clockwise motion unscrew the strainer

nut

(22) from the inlet threaded air connector (38).

Leave the flat washer (23) on the connector (38).

3. Install the nozzle and plunger valve at the upper

position of pool inlet. From the inside of the pool

liner insert the nozzle union (25 & 38) into one of

the pre-cut holes with the washer remaining on the

connector to be placed against the inside of the liner

wall.

4. Before assembly, lubricate the threads with a

petroleum jelly. Then, with the flat side of the

strainer nut

(22) facing the outside wall of the liner

in a clockwise motion screw the strainer nut (22)

back onto the inlet threaded air connector (38)

(see drawing 6).

5. Finger tighten the adjustable pool inlet jet nozzle (25)

and the strainer nut (22) onto the inlet threaded air

connector

(38).

6. Grasp the plunger valve assembly. Make sure the

step washer

(21) is in place.

7. Screw the air jet valve (37) over the inlet threaded air

connector

(38). NOTE: Make sure the air jet valve

is securely tighten and facing up. In a clockwise

motion screw the plunger valve union back onto the

inlet threaded air connector (38) (see drawing 7).

8. In a clockwise motion turn the plunger valve handle

to close position. Ensure the plunger valve is

securely closed. This will prevent water from flowing

out during filling of the pool (see drawing 8).

9. Adjust the direction of the nozzle head pointing

away from the pool outlet for a better circulation

result

(see drawing 9).

10. The pool liner is now ready to be filled with water.

Consult the above-ground-pool owner’s manual for

the filling instructions.

(249IO) MODEL ECO7221/7231 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 04/13/2017

249A

SAVE THESE INSTRUCTIONS

English

Page 10

SALTWATER SYSTEM/FILTER PUMP SETUP

Saltwater System/Filter Pump

1. Remove the Saltwater System/Filter Pump and hoses from the packaging.

2. Place the Saltwater System/Filter Pump in a location for hose (8) connections to the plunger

valve assemblies. Ensure the Saltwater System/Filter Pump is accessible at all time for

service and maintenance.

NOTE: Some regional regulations may require the filter pump to be mounted on a

stationary platform. There are two mounting holes located in the pump base for this

reason. Consult your local authorities for filter pump mounting requirements.

3. Grasp the two pump hoses (8) and connect the hose nuts to the Saltwater System/Filter

Pump.

4. In a counter-clockwise motion unscrew the threaded filter housing collar (3) from the filter

housing. Place it in a safe place.

5. The Saltwater System/Filter Pump is an airtight system. In a counter-clockwise motion turn

both air release valves (1 & 7) 1 - 2 turns to open. DO NOT remove air release valves as

water will expel with force if the motor is turned on and injury may occur.

6. Grasp and remove the filter housing cover (4). Check to see if a cartridge is inside the

housing. If yes, replace the cover, finger tighten the housing collar (3) back onto the filter

housing.

7. Gently finger tighten the sediment release valve located at the bottom of the housing to be

sure that water does not leak out.

8. When the pool is filled connect the hose from the electrolytic cell outlet to the highest strainer

assembly. You will find the hose connection at the bottom of the plunger valve assembly. Use

the hose nut to attach the hose.

9. Connect the second hose to the middle of the motor housing and to the remaining liner

connection.

IMPORTANT

To prevent air lock, open the lower plunger valve (connected inlet hose) first and then

the upper plunger valve (connected outlet hose). Open air release valves, lift and lower

the inlet hose until water starts to flow out of the air release valves, close air release

valves.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intex Wasserpumpe Handbücher

Intex

Intex Krystal Clear SF40220RC Bedienungsanleitung

Intex

Intex Krystal Clear 601 Bedienungsanleitung

Intex

Intex AP619RL Bedienungsanleitung

Intex

Intex Quick-Fill AP640 Bedienungsanleitung

Intex

Intex SF80220-2 Bedienungsanleitung

Intex

Intex PureSpa SSP-H-10-2 Bedienungsanleitung

Intex

Intex QuickFill AP636 Bedienungsanleitung

Intex

Intex AP619A Bedienungsanleitung

Intex

Intex Quick-Fill AP622 Bedienungsanleitung

Intex

Intex Built-in Fast-Fill AP620A Bedienungsanleitung

Intex

Intex ECO 20110 Bedienungsanleitung

Intex

Intex Krystal Clear C330 Bedienungsanleitung

Intex

Intex Krystal Clear SF10220 Bedienungsanleitung

Intex

Intex Krystal Clear SX925 Bedienungsanleitung

Intex

Intex Krystal Clear SF90220T Bedienungsanleitung

Intex

Intex Quickfill AP619D Bedienungsanleitung

Intex

Intex Quick-Fill AP642 Bedienungsanleitung

Intex

Intex krystal clear 636T Bedienungsanleitung

Intex

Intex Fast-Fill AP619C Bedienungsanleitung

Intex

Intex SF15220 Bedienungsanleitung

Intex

Intex Quick-Fil AP634 Bedienungsanleitung

Intex

Intex AP638 Bedienungsanleitung

Intex

Intex Krystal Clear 601 Bedienungsanleitung

Intex

Intex Quick-Fill AP641 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung