Intex KRYSTAL CLEAR 638 Bedienungsanleitung

106

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

OOWWNNEERR’’SSMMAANNUUAALL

IMPORTANT

SAFETY RULES

Read, Understand, and Follow all

Instructions Carefully before

Installing and using this Product.

Don’t forget to try these other fine Intex products: Pools, Pool Accessories,

Inflatable Pools and In-Home Toys, Airbeds and Boats available at fine

retailers or visit our website.

For illustrative purposes only.

Rechte vorbehalten.

Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous

licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen

Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Development Co. Ltd., 8th Floor, Dah Sing

Financial Centre, 108 Gloucester Road, Wanchai, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach,

CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea

por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., P.O. Box nr. 1075 – 4700 BB Roosendaal – The

Netherlands

Krystal ClearTM

Model 638 Filter Pump

220 - 240 V~, 50 Hz, 85 W

Hmax 1.0 m, H min 0.19 m, IPX7

Max. Water Temperature 35 °C

106**-A0-0701

106

SAVE THESE INSTRUCTIONS Page 2

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

TTAABBLLEEOOFFCCOONNTTEENNTTSS

Warnings.......................................................................... 3

Parts List & Reference.................................................... 4-5

Set Up Instructions ........................................................ 6-7

Stationary Mounting Option........................................... 8

Maintenance..................................................................... 9

Pool Care and Chemicals............................................... 10

Long Term Storage.......................................................... 10

Troubleshooting Guide................................................... 11

Common Pool Problems................................................. 12

General Aquatic Safety................................................... 13

Limited Warranty............................................................. 14

Intex Service Center Locations...................................... 15

106

SAVE THESE INSTRUCTIONS Page 3

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

SSAAFFEETTYYRRUULLEESS

WARNING

• To reduce the risk of injury, do not permit children to use this product. Always

supervise children and those with disabilities.

• Risk of electric shock. Connect this product only to a grounding type receptacle

protected by a ground-fault circuit interrupter (GFCI) or residual current device

(RCD). Contact a qualified electrician if you cannot verify that the receptacle is

protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD,

which has a maximum rate of 30mA. Do not use a portable residual current device

(PRCD).

• Do not bury electrical cord. Locate cord where it will not be damaged by lawn

mowers, hedge trimmers, and other equipment.

• The supply cord cannot be replaced. If the cord is damaged the appliance should

be scrapped.

• To reduce the risk of electric shock, do not use extension cords, timers, plug

adaptors or converter plugs to connect unit to electric supply; provide a properly

located outlet.

• Assembly and disassembly by adults only.

• Do not attempt to plug in or unplug this product while standing in water or when

your hands are wet.

• Position this product away from pool to prevent a child from climbing on pump to

access the pool.

• Children must stay away from this product and electrical cord(s).

• Do not operate this product when pool is occupied.

• Always unplug this product from the electrical outlet before removing, cleaning,

servicing or making any adjustment to the product.

• This product is for use with storable pools only. Do not use with permanently

installed pools. A storable pool is constructed so that it may be readily

disassembled for storage and reassembled to its original configuration.

• Keep this product more than 2m away from the pool. (for France only).

• Keep the plug of this product more than 3.5m away from the pool.

• The plug shall be accessible after product installed.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN

PROPERTY DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR

OTHER SERIOUS INJURY OR DEATH.

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

These product warnings, instructions and safety rules provided with the product represent

some common risks of water recreation devices and do not cover all instances of risk and

danger. Please use common sense and good judgement when enjoying any water activity.

106

SAVE THESE INSTRUCTIONS Page 4

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

PPAARRTTSSLLIISSTT

PARTS LIST

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to

scale.

106

SAVE THESE INSTRUCTIONS Page 5

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

PPAARRTTSSRREEFFEERREENNCCEE

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

When ordering parts, be sure to quote the model number and part numbers.

REF. NO. DESCRIPTION QTY. SPARE PART NO.

AIR RELEASE VALVE

VALVE O-RING

THREADED COVER

COVER SEAL

FILTER CARTRIDGE (59900)

STRAINER

HOSE

HOSE CLAMP

HOSE SEAL

10460

10264

10459

10325

10120

10399

10122

10134

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.

106

SAVE THESE INSTRUCTIONS Page 6

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

SSEETT--UUPPIINNSSTTRRUUCCTTIIOONNSS

SET-UP INSTRUCTIONS

Be sure you have access to water to fill the pool and chemicals for the water. A

small coin can be used to tighten the hose clamps (8).

IMPORTANT: This filter pump is shipped with the air release valve (1) open

(open the air release valve if necessary). DO NOT replace the air release valve

until you reach STEP #8. Failure to follow these instructions will result in air

trapped inside filter housing; the motor will run dry, be noisy and

malfunction.

1. Assemble above-ground-pool first. Carefully follow the pool’s installation

instructions.

2. Place the Filter-Pump the length of the hose away from the pool wall where the

lower black protruding hose connection is "sticking-out".

3. Remove wall plugs and then insert the strainers (6) into each of the protruding

hose connections. The hoses (7) fit over the strainers inserted into the

connections.

4. There are two hoses to be connected to the Filter-Pump hose connections.

With hose clamps (8), fasten one of the hoses (7) to the lower protruding hose

connection (marked "+" on the pool liner) and to the pump connection (marked

"+").

5. Connect the second hose to the remaining upper protruding hose connection

and to the lower pump connection. Make sure all the hose clamps (8) are tight.

6. Twist the Filter-Pump’s threaded cover (3) in a clock-wise direction to be sure it

is on "tight". Use only your hands to tighten the top. Do not tighten with tools

such as pliers.

7. Fill the pool to a level of at least 1-2 inches above the top connection. The

water will automatically flow down into the pump.

8. When water starts flowing out of the air release valve hole, screw in the air

release valve back into the filter housing cover. Do not over tighten the valve.

NOTE: Venting the system is necessary for air to escape as the filter

housing fills with water.

9. Connect the filter pump to the power outlet. The filter pump is now filtering the

water.

10. Operate the filter pump until the desired water clarity is obtained.

WARNING

Risk of electric shock. Connect this product only to a grounding

type receptacle protected by a ground-fault circuit interrupter

(GFCI) or residual current device (RCD). Contact a qualified

electrician if you cannot verify that the receptacle is protected by a

GFCI/RCD. Use a qualified electrician to install the GFCI/RCD,

which has a maximum rate of 30mA. Do not use a portable residual

current device (PRCD).

106

SAVE THESE INSTRUCTIONS Page 7

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

SSEETT--UUPPIINNSSTTRRUUCCTTIIOONNSS

SET-UP INSTRUCTIONS (continued)

WARNING

Position this product away from pool to prevent a child from

climbing the pool.

To inspect and change the filter cartridge, disconnect line cord, unscrew the

strainer grids (6) from the strainer connectors and insert the hat-like plugs into the

strainer connectors before servicing the filter. After service, open the air release

valve, remove the plugs, allow any air to escape through the valve before tightening

the valve again and replace the strainer grids. The pump is now primed with water

again and may be turned on.

(ILLUSTRATION NOT TO SCALE)

WATER LEVEL

HOSE

CLAMP

INSIDE OF POOL

STRAINER

PLUG

UPPER PROTRUDING

HOSE CONNECTION

UPPER PUMP

CONNECTION

BOTTOM PUMP

CONNECTION

THREADED

COVER

FILTER

CARTRIDGE

INSIDE

AIR RELEASE

VALVE

HOSE

106

SAVE THESE INSTRUCTIONS Page 8

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

SSTTAATTIIOONNAARRYYMMOOUUNNTTIINNGGOOPPTTIIOONN

FILTER PUMP STATIONARY MOUNTING OPTION

-- (3) x M6 HEXAGON HEAD BOLTS

-- (3) x M6 HEXAGON LOCK-NUTS

145mm

There are three mounting holes located at the bottom of the filter-pump base.

These holes are provided because various country’s regulations, especially in the

European community, require the filter-pump to be secured to the ground or to a

base in a permanent upright position.

These three holes form a triangle pattern and are 145mm from each other. The

holes are slotted with a 7mm width.

The filter-pump can be mounted on a cement base or onto a wooden structure to

prevent accidental falling over. Total assembly must exceed 18kg. The drawings on

the following show two possible ways of upright mounting. The European norm

EN 60335-2-41 requires this product be secured to the ground or to a base.

106

SAVE THESE INSTRUCTIONS Page 9

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

MMAAIINNTTEENNAANNCCEE

It is recommended that the filter cartridge be replaced at least

every 2 weeks.

1. Make sure filter pump is not operating. Disconnect line cord.

2. To prevent water from escaping the pool, unscrew the strainer grids from the

strainer connectors and insert the hat-like plugs into the strainer connectors.

3. In a counter-clockwise motion, remove threaded cover (3) and cover seal (4).

Be careful not to lose the cover seal (4).

4. Remove filter cartridge (5) to clean it. The filter may be cleaned from the spray

from a water hose.

5. Use judgement as to whether cartridge needs to be replaced.

6. Return cartridge to filtering position.

7. Return the seal (4) and threaded cover (3) to their original positions. Tighten

the threaded cover (3) by hand only, twisting it in a clock-wise direction.

8. After service, open the air release valve, remove the plugs, allow any air to

escape through the valve before tightening the valve again and replace the

strainer grids. The pump is now primed with water again and may be turned on.

FILTER CARTRIDGE CLEANING OR REPLACEMENT

106

SAVE THESE INSTRUCTIONS Page 10

(106) MODEL 638 FILTER PUMP ENGLISH 7.5” X 10.5” PANTONE 295U 01/29/2007

PPOOOOLLMMAAIINNTTEENNAANNCCEE

CAUTION

Concentrated chlorine solutions may damage the pool liner. Always

follow the chemical manufacturer’s directions, and the health and hazard

warnings.

1. Before emptying your pool for long term storage, or relocation, be sure the

water is directed towards an acceptable drain water receptacle away from the

house. Check local regulations for specific directions regarding disposal of

swimming pool water.

2. After pool is empty of all water, disconnect all pool hoses (7) from pool and

filter pump, simply reverse the set up instructions.

3. Remove filter cartridge as shown in the Filter Cartridge Cleaning section,

steps 2 thru 4.

4. Remove the strainers (6) from the pool wall. Place the wall plugs into the hose

connections. Loosen clamps (8) securing the strainers before removal.

5. Drain water from the filter pump housing.

6. Depending on the cartridge (5) usage, a new cartridge may be needed for next

season, keep a spare available.

7. Cover the seal (4), air release valve O-ring (2) and hose seals (9) with

petroleum jelly to preserve its resilience during storage.

8. Store the filter pump and accessories in a dry, cool storage location.

9. The original packing carton can be used for storage.

POOL CARE AND CHEMICALS

• All pools require care to keep the water clear and hygienically clean. With

proper chemical control, your filter will help attain this objective. Consult your

pool supply dealer for instructions regarding the proper use of chlorine,

algaecide and other chemical agents required for sparkling clear water.

• Keep pool chemicals away from children.

• Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations

could occur.

• Daily pH checking and chemical treatment of the water is very important and

can not be overemphasized. Chlorine, algaecide and maintenance of proper pH

levels are required when filling the pool as well as during the season. Consult

your local swimming pool supply store for instructions.

• The season's first filling of the pool may have brackish water requiring extra

water additives and extra filter changes. Do not allow swimming in pool until the

pH level is balanced. Consult your local swimming pool supply store for

instructions.

• Keep spare filter cartridges on hand. Replace cartridges every two weeks.

• Chlorinated water may damage lawns, gardens or shrubbery as children play

in the pool and splash water outside the pool. Lawn areas underneath the

pool liner will be destroyed. Note that some types of grass may grow through

the liner but function is not affected.

• Filter run time depends on pool size, weather and usage level. Experiment with

various run times so as to produce clean clear water.

LONG TERM STORAGE

Inhaltsverzeichnis

Andere Intex Wasserpumpe Handbücher

Intex

Intex SF80220-2 Bedienungsanleitung

Intex

Intex Quick-Fill AP640 Bedienungsanleitung

Intex

Intex Quick-Fill 58609 Bedienungsanleitung

Intex

Intex SF20220R Bedienungsanleitung

Intex

Intex Krystal Clear SF10220 Bedienungsanleitung

Intex

Intex Krystal Clear Deluxe Bedienungsanleitung

Intex

Intex Krytstal Clear 634T Bedienungsanleitung

Intex

Intex 620R Bedienungsanleitung

Intex

Intex Quick-Fill AP609 Bedienungsanleitung

Intex

Intex Krystal Clean Poolwater 8221 Bedienungsanleitung

Intex

Intex Quick-Fill AP641 Bedienungsanleitung

Intex

Intex Quickfill Plus AP620D Bedienungsanleitung

Intex

Intex AP619RL Bedienungsanleitung

Intex

Intex Quick-Fill AP632 Bedienungsanleitung

Intex

Intex Quick-Fill AP639 Bedienungsanleitung

Intex

Intex Quick-Fill AP621 Bedienungsanleitung

Intex

Intex Krystal Clear C1500 Bedienungsanleitung

Intex

Intex Krystal Clear SX925 Bedienungsanleitung

Intex

Intex SF15220 Bedienungsanleitung

Intex

Intex Quickfill AP619D Bedienungsanleitung

Intex

Intex Krystal Clear SX1500 Bedienungsanleitung

Intex

Intex Krystal Clear 603 Bedienungsanleitung

Intex

Intex FastFill I637USB Bedienungsanleitung

Intex

Intex ECO15230-2 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung