IOGear GIC711SW6 Bedienungsanleitung

Inhaltsverzeichnis

Andere IOGear PCI-Karte Handbücher

IOGear

IOGear GUF220 Bedienungsanleitung

IOGear

IOGear UpStream Pro Dual Video Capture Adapter Bedienungsanleitung

IOGear

IOGear GIC320U Bedienungsanleitung

IOGear

IOGear GIC704SR5W6 Bedienungsanleitung

IOGear

IOGear GIC220U Bedienungsanleitung

IOGear

IOGear S3820w-C0 Bedienungsanleitung

IOGear

IOGear GIC430F Bedienungsanleitung

IOGear

IOGear GUH203C Bedienungsanleitung

IOGear

IOGear GIC1394 Bedienungsanleitung

IOGear

IOGear GIC250U Bedienungsanleitung

IOGear

IOGear FireWire 800 GIC3800 GIC3800 GIC3800 Bedienungsanleitung

IOGear

IOGear GICe720S3W6 Bedienungsanleitung

IOGear

IOGear GUF3121 Bedienungsanleitung

IOGear

IOGear GUF320 Bedienungsanleitung

IOGear

IOGear GICe702S3R5W6 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung

1

GIC711SW6

PART NO. M0559

Installation

Installation Guide

eSATA 1.5Gbps 1 external + 1 internal port Low prole PCI card

3

3

Table of Contents

Introduction 4

Features 5

Package Contents 6

Software Installation 7

Federal Communications Commission (FCC) Statement 11

CE Statement 13

Limited Warranty 14

Contact 15

4

5

Introduction

The Low Prole Serial ATA 2 Channel PCI Host Adapter can support both Low prole PCI and standard

size PCI. It provides a 32bit, 33/66 MHz PCI interface on the host side and dual Serial ATA ports on the

device side to access SATA storage media such as: hard disk drives, ZIP drives, CD-ROMs, CD-RWs

and DVD-ROMs. The board supports 32-bit 33/66 MHz PCI bus revision 2.2 and has a Serial ATA

transfer rate of 1.5 Gb/s.

4

5

Features

Compliant with PCI Specication, revision 2.2 •

Integrated PCI DMA engines •

32 bit, 33/66MHz fully compliant PCI host interface•

PCI Interface

High Speed Serial ATA Interface

Dual high speed Serial ATA interface Channels, each supporting 1st generation Serial ATA data rates •

(1.5Gb/s)

Fully compliant with Serial ATA 1.0 specications •

Supports Spread Spectrum in receiver •

Independent 256-byte FIFOs (32 bit * 64 deep) per Serial ATA channel for host reads and writes •

6

7

Package Contents

Low Prole Serial ATA 2 Channel PCI Host Adapter•

Low prole PCI bracket•

SATA cable•

Quick Start Guide•

Driver CD•

6

7

Software Installation

Windows XP Driver Installation

1. Before installation, copy all the les under directory [CD Drive Letter]:\SATA Non-Raid_2Port\ Sil3x12\

Win98_me _2000_xp_nt4.0\driver\ *.* to a blank oppy disk.

2. After the SATA PCI Host Adapter and attached drives are congured, follow Microsoft procedures to

install Windows accordingly.

3. At the Windows Set-up screen, press F6 in order to specify and add the driver.

4. Insert the Driver diskette. Press Sthen press Enter.

5. Select Silicon Image Sil-3x12 SATALink Controller Driver and press Enter.

6. Press Enter to continue and follow the on-screen instructions to complete Windows XP installation.

Note: When the Software Installation warning pops up, click Yes. And when the Hardware

Installation warning pops up, click Yes again.

8

9

Add Windows XP Driver to Original Boot

Device

1. When the Found New Hardware Wizard

starts, check the option to Install from a

list or specic location (advanced), and

click Next.

8

9

2. Insert the Driver CD. Point the wizard to the

proper drive letter and click Browse.

3. Point the wizard to the following location:

[CD Drive Letter]:\SATA Non-Raid_2Port\

Sil3x12\ Win98_me _2000_xp_nt4.0 \

Driver, click OK then Next.

4. Once the drivers have been installed click

Finish to nalize the installation.

10

11

Verication of Proper Installation for

Windows XP

1. Open Device Manager.

2. Double click SCSI and RAID Controllers,

then double click Silicon Image Sil-3x12

SATALink Controller to display the driver

properties.

3. If the message This device is working

properly is displayed in the dialog box, then

the driver has been correctly installed.