IPC Eagle BP6 Bedienungsanleitung

OPERATIONS MANUAL

& PARTS LIST

BP6, BP10

Backpack Vac

IPC Eagle •3650 Dodd Rd, Eagan MN 55123 •800.486.2775 •www.ipceagle.com

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

BEFORE OPERATING THE MACHINE

Read the manual carefully and completely before attempting to operate the unit. This manual has

important information for the use and safe operation of the machine. Keep this manual handy at all

times. This machine will assure years of satisfactory service if operated and maintained according to

recommendations in this manual. If additional information is needed, please contact your local

distributor or write to:

IPC Eagle

3650 Dodd Rd.

Eagan, MN 55123

INSPECTION

Carefully unpack and inspect your commercial backpack vacuum for shipping damage. Each unit is

tested and thoroughly inspected before shipping. For instructions regarding shipping damage, contact

IPC Eagle immediately. All returns must have a Return Authorization Number.

WARNING

▪Do not leave backpack vacuum plugged in when not in use. Unplug the unit from the wall outlet before

serving.

▪Do not leave outdoors or on wet surfaces.

▪Do not try to vacuum any liquid with this unit. This vacuum is designed for dry vacuuming only.

▪Use only as described in this manual. Use only the manufacture’s recommended attachments and

replacement parts.

▪To prevent electrical damage, use the recommended 50 ft/ 16 gauge extension cord provided. If you

need to use a 100 ft. extension cord, it must be 14 gauge or greater. DO NOT use extension cords

greater than 100 ft. with this unit.

▪Do not use a damaged power cord or plug. If the unit is not operating as intended, if the unit has been

dropped, damaged, left outdoors, or exposed to water, return the unit to an authorized IPC Eagle

representative for an inspection.

▪Do not carry the unit by the power cord or use the power cord as a handle. Do not close a door on the

power cord or wrap around sharp edges or corners. Do not run over the power cord. Keep the power

cord away from heated surfaces.

▪Do not pull on the power cord to unplug the unit. Grasp plug at the wall outlet.

▪Do not handle with wet hands.

▪Do not put any objects into openings. Keep hair, loose clothing, fingers, and all parts of the body away

from openings and moving parts. Long hair should not hang over or near the unit.

▪Do not vacuum flammable/ combustible materials or anything that is burning or smoking such as

cigarettes, matches or hot ashes.

▪Empty the filter bag after every use and before storage. Some types of dust and debris may combust.

▪Turn off the unit before unplugging.

▪Connect to a properly grounded outlet only.

FAILURE TO COMPLY WITH THE ABOVE WARNING INSTRUCTIONS

WILL VOID YOUR WARRANTY

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

MOTOR

AMETEK LAMB electric thru-flow vacuum motors must never be used in applications in which wet or

moist conditions are involved. Such motors are designed to permit the vacuumed air to pas over the

electrical wiring to cool it. Therefore, any liquid (including water), dry chemical or other foreign

substance which would come in contact with electrical conductors could cause combustion (depending

on volatility) or electrical shock. Failure to observe these precautions could result in property damage

and severe personal injury.

ELECTRICAL

This model is avaliable in 120 Vac/ 60Hz only. Severe changes in voltage, high or low, can cause

damage to the motor and premature motor failure. Model number and specifications can be obtained by

calling an IPC Eagle representative.

GROUNDING INSTRUCTIONS

THIS VACUUM MUST BE GROUNDED

If the unit should malfunction or stop operating, grounding provides a path of least resistance for

electrical current, therefore reducing the risk of electrical shock. This unit is equipped with a power cord

that has an equipment grounding conductor and grounding plug. The plug must be inserted into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and

ordinances. Cutting off the ground wire or using an extension cord that is not equipped with a grounding

plug will void the warranty on this unit and IPC Eagle will not accept liabilities associated with this

unit.

Improper connection of the equipment grounding connector can result in a risk of electrical shock.

Check with a qualified electrician or service person if you are in doubt that the outlet is properly

grounded. Do not modify the grounding plug on the vacuum in any way.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

PREPARING THE BACKPACK FOR OPERATION

1. Remove the top cap and pull out the cloth filter. Verify that the dome filter

has not shifted during shipping. Install a micro filter inside the cloth filter. At

the beginning of each shift, the filters should be checked. Empty or replace as

necessary.

NOTE: Never use a Micro Filter without the cloth filter in place.

2. Adjust the cap back into place and insert the vacuum hose into the cap opening.

3. Place the aluminum wand into the vacuum hose and twist to secure.

Verify that both ends of the vacuum hose are tightly secured.

4. Loosen the shoulder straps and the waist belt. In an open area, lift the

backpack and place arms through the shoulder straps.

5. Fasten the waist belt on the backpack, making sure the weight is resting

comfortably on your hips.

NOTE: The back plate may be adjusted up or down by removing the screws

that attach the backpack to the back plate.

6. Place extension cord between the waist belt and your body to signal when

you have run out of cord while vacuuming.

NOTE: Verify that the power cord is in good working order before turning on

the unit.

7. Loosen the plastic nut located at the end of the wand to insert the attachment tools and tighten the

plastic nut.

NOTE: Never remove the plastic nut and verify the copper rings stays in place when attaching the

tools.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

OPERATING SECTION

Electrical Power Cord Care

Never stretch the power cord tightly between the backpack and the electrical

outlet.

NOTE: A power cord that is stretched or pulled may not function properly

and can create a dangerous condition.

After vacuuming, unplug the extension cord at both ends and wind the cord up

loosely. Don not wind the extension cord up by wrapping the cord around

your hand and elbow.

Proper Storage

When the backpack is not in use, store the unit in a dry place.

Proper Vacuuming Motion for Large Areas

Begin with the wand placed parallel to your body.

Pull the top portion of the wand inward towards your waist and twist at the

waist while walking backward or forwards (using a side-by-side motion).

Ergonomics

▪The waist of the vacuum should be carried on the operator’s hips and be evenly distributed.

▪The padded waist belt and shoulder straps are adjustable for a custom fit.

▪The backpacks have a ventilated back plate to keep the operator cool.

▪The ON/OFF switch is conveniently placed for easy access on the waist belt of the backpack.

▪Use the proper attachments for the job. IPC Eagle has attachments to perform most jobs without

requiring the operator to bend over or get into difficult positions.

Caring for the Backpack.

▪Every time you have finished vacuuming, clean the cloth and/ or micro filter.

▪Each week, rinse, air dry and return the foam filter diffuser to the bottom of the backpack vacuum

located below the motor.

▪After each shift, wipe the inside and outside of the backpack with a household cleaning agent.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

PREVENTATIVE MAINTENANCE SECTION

WARNING:

▪To avoid risk of electrical shock, personal injury or death; disconnect power before servicing.

▪The following information is for use by a qualified service personnel only and is to provide guidance

for troubleshooting and maintenance.

▪Check the condition of all electrical power cords before each use.

▪Service the backpack every six months by a qualified authorized service center to check the carbon

brushes on the motor and replace any brush worn down to ½” in length.

▪Do not lubricate the motor; motor is equipped with sealed bearings.

Filter Maintenance

1. Check the Micro Filter each and every time the unit is operated and finished

operating.

NOTE: A clogged or dirty filter will restrict airflow, which could result in

reduction of suction and overheating.

While vacuuming throughout a structure, stop every two hours or as needed to

clean the micro filter. Replace the micro filter when necessary.

NOTE: Lift both the micro filter and the cloth filter from the unit at the same time.

This will prevent the micro filter from being damaged especially if the micro filter

is full.

Once a month or more often if necessary, wash the cloth filter by hand or by machine and line dry. DO

NOT PLACE IN DRYER.

2. Once a week or more often if necessary, clean the dome filter located inside the

vacuum underneath the micro filter and cloth filter.

3. Each week, rinse, air dry and return the foam filter diffuser to the bottom of the

backpack vacuum located below the motor.

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

TROUBLESHOOTING

UNIT DOES NOT OPERATE

POSSIBLE CAUSE SOLUTION

Unit is not plugged into the extension cord. Plug into the 50ft extension cord provided.

Unit is not plugged into the electrical outlet. Plug into an electrical outlet.

Power switch not turned on? If no, plug the unit into an electrical outlet.

If yes, verify electrical outlet has power.

Circuit breaker may have tripped or blown

a fuse.

____________________________________________________________________________________

WARMER THAN NORMAL EXHAUST

POSSIBLE CAUSE SOLUTION

Dirty filters. Clean all filters in the unit

WARM POWER CORD PIGTAIL

POSSIBLE CAUSE SOLUTION

Extension cord is too long and/or Verify that extension cord does not exceed

wrong gauge. 50 ft in length and the correct gauge or

wiring is used.

LOSE OF SUCTION

POSSIBLE CAUSE SOLUTION

Cap not on tight. Attach cap properly.

Dirty filters. Clean all filters in the unit.

Loose hose cuffs. Tighten hose cuffs.

Holes or cuts in the vacuum hose. Replace vacuum hose; call for service

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

BP6 and BP10

ITEM # BP10 BP6 DESCRIPTION QT

1J12035 Hose, 4" X 1.5 in 1

2F13054 F12909 Lid, 10 qt 1

3K12019 Dome Filter Assembly 1

4G13145 Vacuum, 5.7, Single Stage 1

5B00190 Nylon Tie, 4 in 2

6C00256 Star Washer 1

7C00284 Screw, 10-32 X .375 Ground 1

8E12065 Gasket, Motor, Ametek 1

9B00178 Spade Connector, Male 1

10 B00177 Spade Connector, Female 1

11 L12011 Harness, Atlas Backpack 1

12 C12040 Screw, 1-4 20 X .5 in PH 6

13 C12039 Washer, 1-4 X 1, SS 6

14 C11529 Screw, 10-32 X .375 in 3

15 C03251 Washer 8

16 D12020 Latch, Black 2

17 C12096 Screw, 8-32 X .375 in RH Mach. 5

18 F13055 F12910 Tank, 10 qt/ 6qt 1

19 E12050 E12051 Seal, Upper & Lower Tank 1

20 F13056 F12911 Base, 10 qt/ 6 qt 1

21 H11839 Label, Patent Pending 1

22 H00565-5 Label, Serial Number, Standard 1

23 D12026 Grille, Exhaust, Aluminum 2

24 E12024 Gasket, Frame, Exhaust 2

25 F12025 Frame, Exhaust 2

26 C00293 #8 X .5 in Pan Black 8

27 E12916 Foam, 5.25 X 14 X .5 in 1

28 E12028 E12044 Foam, 6.75 in. Dia X 1 in 1

29 E11998 E12047 O-Ring, Backpack 1

30 F12043 F12048 Plate, .125 in ABS, 10 qt/ 6qt 1

31 C02288 Screw, #8 X .5 in, Black Pan 6

32 E12031 E12041 Bumper Ring, 10 qt/ 6 qt 1

33 C12073 Screw, #8 X 1.125 in, Washer Hex 4

34 B12018 Cord-Switch Assembly 1

35 B11944 Power Cord, 16-3 X 50' 1

36 L12010 L12009 Filter Bag, Cloth, 10 qt/ 6 qt 1

37 L12006-1 L12004-1 Synth Bag, Indiv., 10 qt/ 6qt 1

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

NOTES

https://harrissupplyind.com-ToOrderPartsCall608-268-8080

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IPC Eagle Staubsauger Handbücher

IPC Eagle

IPC Eagle S9440P Leitfaden

IPC Eagle

IPC Eagle Barrel Vac Leitfaden

IPC Eagle

IPC Eagle S9DUSTPRO Leitfaden

IPC Eagle

IPC Eagle 415P-AD Leitfaden

IPC Eagle

IPC Eagle Barrel Vac S9430BV Leitfaden

IPC Eagle

IPC Eagle S6EVO Leitfaden

IPC Eagle

IPC Eagle 429P-AD Leitfaden

IPC Eagle

IPC Eagle 14" Bedienungsanleitung

IPC Eagle

IPC Eagle GC 150 Leitfaden

IPC Eagle

IPC Eagle Barrel Vac S9429BV Leitfaden

IPC Eagle

IPC Eagle Planet Optimum Series Leitfaden

IPC Eagle

IPC Eagle 315P Leitfaden

IPC Eagle

IPC Eagle Pulsar Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung