Ipf electronic PT65 Series Bedienungsanleitung

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 1

PT65002x

Laser-Distance-Sensors

Table of Contents

1 General Notes....................................................................................................................................... 2

2 Functional Principal .............................................................................................................................. 3

3 Mounting Instructions .......................................................................................................................... 3

4 Application hints .................................................................................................................................. 8

5 Teaching of the Measuring Range ....................................................................................................... 10

6 Technical Data ................................................................................................................................... 16

7 Connection diagram and pin assignment ............................................................................................ 18

8 Grounding Concept ............................................................................................................................ 19

9 Service Notes ..................................................................................................................................... 19

10 Accessories ........................................................................................................................................ 19

11 Troubleshooting ................................................................................................................................. 20

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 2

1 General Notes

Rules for proper usage

This product is a precision device which has been designed for the detection of

objects and parts. It generates and provides measured values issued as electrical

signals for following systems.

Unless this product has not been specifically marked it may not be used in hazard-

ous areas.

Set-Up

Installation, mounting and adjustment of this product may only be executed by

skilled employees.

Installation

Only mounting devices and accessories specifically provided for this product may

be used for installation.

Unused outputs may not be connected.

Unused strands of hardwired sensors must be isolated. Do not exceed the maxi-

mum permissible bending radius of the cable.

Before connecting the product electrically the system must be powered down.

Where screened cables are mandatory, they have to be used in order to assure

EMI protection. When assembling connectors and screened cables at customer

site the screen of the cable must be linked to the connector housing via a large

contact area.

Laser Safety

•The laser diode installed in the PT65 emits visible red laser lights. This laser belongs to the Class 2 laser standard

specified by the IEC 60825-1.

•Max. average output power < 1 mW.

•Laser radiation, do not stare into beam.

•To avoid uncontrolled laser exposure we recommended stopping the beam with a matte object.

•For laser safety reasons, the voltage supply of the sensors must be turned off when the whole system or the

machine is turned off.

•Safety concept information and limiting parameters as published in the sales documentation apply at all times.

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 3

2 Functional Principal

The distance measured is based on the triangulation principle. The emitted laser beam falls on the object as a small

light spot and will be reflected diffusely. The position of the received light spot on the receiver (a diode line) defines

the receiving angle. This angle corresponds to the distance and is the base for the internal calculations.

A distance change close to the sensor effects a large change in angle; the same distance change at the end of the

measuring range has a much smaller effect to the angle. This non-linearity feature is linearized by the microcontroller.

The analog output signal is linear to the distance..

The sensor adapts automatically to different object colors by varying the emitting laser intensity and

optimizing the exposure time. The result is a sensor that is nearly independent on different reflections (different colors,

shiny surfaces, dark objects). The sensor reaches its highest accuracy if the object reflects diffusely.

3 Mounting Instructions

•For a proper mounting, the mounting surface has to be flat. Be aware of the max. tightening torque.

•In case of EMC, the sensor has to be grounded and a shielded cable has to be used.

•The 90° rotating connecter allows wiring the sensor from the bottom side or from the rear.

•The max. accuracy will be reached >15 minutes after power on.

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 4

Steps / Edges:

When measuring right next to steps / edges, it is important that the receiving beam is not covered by the steps /

edges. This also applies to depth measurements of holes or valleys.

Mounting above shiny surfaces:

On shiny surfaces, it is important that no direct reflection can get to the receiving optics.

The reflection could blind the sensor and produce poor results. To prevent this, the sensor may be slightly tilted. The

direct reflection can be seen on a white piece of paper when held in front of the receiver.

Mounting above round, shiny surfaces:

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 5

Shiny objects with a constant structure:

Especially shiny objects with a constant structure (lathed or scuffed objects, extruded aluminum profiles, etc.) could

have a negative effect on the measuring result.

Objects with color edges in the same direction:

When color edges are orientated in the right direction, the effect to the measuring result will be minor. If the color

edges are in the wrong direction, the effect will depend on the reflectivity of the different colors.

Profile measurement:

For profile measurements, the sensor axes should be perpendicular to the moving direction.

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 6

Several sensors without mutual optical interferences:

Several sensors, when mounted next to the other, can affect each other. When mounting a sensor, be aware that

no laser spot from another sensor is in the receiving field.

When mounted side by side (as shown in the picture in the middle), sensing distances up to 600mm can be achieved.

Ambient Light

Be careful that no strong light source faces the receiving field.

Measuring Range Measuring

Range

Mutual

Interference

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 7

3.1 Measuring Field

PT650025 / PT65002E PT650026 / PT65002F

PT650027 / PT65002G PT650028 / PT65002H

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 8

4 Application Hints

To reach the maximum accuracy of PT65 series laser distance sensors, keep an eye on the following points:

Measuring on rough surfaces

All laser distance sensors are adjusted and linearized on a reference object. The object is a white ceramic sheet with

an absolutely flat surface.

Many objects have a surface structure that is within the resolution of the sensor or rougher. In such a case, the

sensor with its small laser spot measures the distance including the structure in contrast to a slide gauge that

measures an average.

For such applications, we recommend to use a laser distance sensor with a laser line (PT66302x).

What can you do if you have color edges?

Often objects have several color edges on the surface.

For example:

Text Pictures Grooves Rust Marble

In the field, you have no guarantee that the spot is not falling on just a color edge that can cause a measuring fault.

Also, when the object moves, you may get an incorrect signal for each color edge (it appears that the signal is unsta-

ble or has spikes)

In such cases, we suggest to move the object (or sensor), take several measurement values and calculate the aver-

age. The quantity of measurement values depends on the structure, the moving speed and the accuracy you desire.

Other possible solutions:

Use a sensor with the laser line (PT66302x).

PT65

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 9

What can you do if you have transparent, semi-transparent and highly reflective objects?

The measuring principle desires an object that reflects the light diffusely. Semi-transparent, transparent and highly re-

flective objects do not have this feature.

•When measuring on semi-transparent objects, the light enters the object and so the measured distance is larger

than the actual distance is.

•Light will pass through a transparent object so a measuring signal is not available.

•A highly reflective object only has a direct reflection and it is not possible to work with it. For such an application,

ask the ipf electronic sales staff.

to measure these objects, it is only possible if you place a diffuse reflecting surface on the object (sticker, etc.)

Semi transparent objects:

the light enters the object.



the measured distance is larger

than the real distance

Transparent objects:

The light passes the object without a

diffuse reflection.

No measurement is possible

Highly reflective objects:

Only direct reflection

No measurement is possible.

MANUAL • Subject to alteration! Version: June 2015

ipf electronic gmbh

• Rosmarter Allee 14 • 58762 Altena

│

Tel +49 2351 9365-0 • Fax +49 2351 9365-19

│

info@ipf-electronic.com • www.ipf-electronic.com 10

5Teaching of the Measuring Range

Every sensor is delivered with the factory setup (max. measuring range). The teach-in feature was designed to

choose a smaller range within the nominal measuring range for optimizing the resolution and linearity. Output cur-

rent, voltage and alarm output adapt to the new range. Two positions must be taught.

•The first teach-in position aligns with 0V (or 4mA), the second position aligns with 10V (or 20mA)

•These teach-in positions are always just at the border of the new range (inside the measuring range)

•The sensor may be taught more than 10,000 times in its lifetime

•The sensor can always be reset to the factory settings

•The sensor may be taught with the teach button or via the external teach input

•During the teach-in process, the red LED provides a feedback

•The red LED on the back side of the sensor indicates “run” mode if an object is within the measuring range.

Attention:

Within 5 minutes after power on, the sensor can be taught via the button or the teach-in wire. After 5 minutes, the

teach-in button will be locked preventing accidental adjustment. The teach-in wire is active all the time.

Example of a taught measuring range (4mA / 0V near, 20mA /10V far)

Example of a reverse taught measuring range (4mA / 0V far, 20mA /10V near)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ipf electronic Zubehör Handbücher

ipf electronic

ipf electronic OT059176 Bedienungsanleitung

ipf electronic

ipf electronic DW35312 Series Bedienungsanleitung

ipf electronic

ipf electronic OT0591A4 Bedienungsanleitung

ipf electronic

ipf electronic UT139073 Bedienungsanleitung

ipf electronic

ipf electronic DW34311 Series Bedienungsanleitung

ipf electronic

ipf electronic ON330571 Bedienungsanleitung

ipf electronic

ipf electronic UT360321 Bedienungsanleitung

ipf electronic

ipf electronic DW34312 Series Bedienungsanleitung

ipf electronic

ipf electronic MW10015 Series Bedienungsanleitung

ipf electronic

ipf electronic OT450521 Bedienungsanleitung

ipf electronic

ipf electronic OTR49175 Bedienungsanleitung

ipf electronic

ipf electronic OTR49174 Bedienungsanleitung

ipf electronic

ipf electronic UT309023 Bedienungsanleitung

ipf electronic

ipf electronic OTQ90170 Bedienungsanleitung

ipf electronic

ipf electronic opti-check OC5396 Series Bedienungsanleitung

ipf electronic

ipf electronic OR150400 Bedienungsanleitung

ipf electronic

ipf electronic UT189020 Bedienungsanleitung

ipf electronic

ipf electronic OTQ80576 Bedienungsanleitung

ipf electronic

ipf electronic PT120320 Bedienungsanleitung

ipf electronic

ipf electronic UT30C310 Bedienungsanleitung

ipf electronic

ipf electronic UT36002B Bedienungsanleitung

ipf electronic

ipf electronic OT330571 Bedienungsanleitung

ipf electronic

ipf electronic ON430571 Bedienungsanleitung

ipf electronic

ipf electronic ON430570 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

ipf electronic PT65 Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken