Jasic EVOLVE 200 Bedienungsanleitung
EVOLVE 200 USER MANUAL
EVOLVE 200
USER MANUAL
REV.20201219
EVOLVE 200 USER MANUAL
CONTENTS
1. Product overview ........................................................................................................................ 1
1.1 Conformity declaration ........................................................................................................... 2
1.2 Front panel general descriptions ............................................................................................ 6
1.3 Boot up self-test and display .................................................................................................. 7
1.4 Photos of the machine and instructions ................................................................................. 8
1.5 Main parameters of the welding machine .............................................................................. 9
1.6 Wi-Fi connection .................................................................................................................. 10
2. Instructions for welding function ................................................................................................ 11
2.1 Welding mode instructions ................................................................................................... 11
2.2 Welding operate mode instructions ...................................................................................... 12
2.3 Welding materials selection instructions .............................................................................. 14
2.4 Welding technology parameter selection instruction ............................................................ 14
2.5 Welding storage group selection instructions ....................................................................... 14
2.6 MMA welding function instructions ....................................................................................... 15
2.7 TIG welding function instructions ......................................................................................... 21
2.8 MIG welding function instructions ........................................................................................ 28
3. Instructions for MOBILE Application .......................................................................................... 39
3.1 REMOTE CONTROLS ........................................................................................................ 39
3.2 REMOTE CONTROL APP MOBILE .................................................................................... 40
4. Torch and remote control available ........................................................................................... 40
4.1 Remote control connection .................................................................................................. 41
5. Alarms of the machine and troubleshooting .............................................................................. 42
Appendix 1 SPARE FUNCTIONS instructions ........................................................................... 44
Appendix 2 MACHINE SCHEMATICS ....................................................................................... 49
Appendix 3 SPARE PART LIST ................................................................................................ 50
Appendix 4 TIG synergic programs table ................................................................................... 53
Appendix 5 MIG synergic programs table .................................................................................. 54
EVOLVE 200 USER MANUAL
1
SHENZHEN JASIC TECHNOLOGY CO., LTD. solemnly promises:
This product is manufactured according to relevant standards of China and relevant international standards, and
meets safety standards such as GB15579.1, IEC 60974-1, EN 60974.1, AS 60974.1 and UL 60974.1.
2014/35/EU (LDV) – 2014/30/EU (EMC) – 2002/95 (RoHs) and with the instructions contained in the harmonized
standard, if applicable: EN 60974-1 EN 60974-2 EN 60974-3 EN 60974-5 EN 60974-7 EN 60974-10 EN 60974-12
Relevant design plans and manufacturing technologies of this product are patented.
Operate after reading this manual carefully.
1. JASIC has the right to revise this manual at any time without prior notice.
2. Though contents in this manual have been carefully checked, inaccuracies might have occurred. For any
inaccuracy, please contact us.
3. This manual was released in Nov, 2020.
SHENZHEN JASIC TECHNOLOGY CO., LTD.
Address: No. 3, Qinglan 1st Road, Pingshan District, Shenzhen, Guangdong, China
Postcode: 518118
Tel: 0755-29651666 Fax: 0755-27364108
Website: http://www.jasictech.com E-mail: sales@jasictech.com
1. Product overview
IN CASE OF BAD OPERATION YOU DEMAND THE
ATTENDANCE OF QUALIFIED STAFF
WARNING
IMPORTANT: BEFORE STARTING THE EQUIPMENT, READ THE CONTENTS OF THIS MANUAL,
WHICH MUST BE STORED IN A PLACE FAMILIAR TO ALL USERS FOR THE ENTIRE OPERATIVE LIFE
SPAN OF THE MACHINE.THIS EQUIPMENT MUST BE USED SOLELY FOR WELDING OPERATIONS.
EVOLVE 200 USER MANUAL
2
1.1 Conformity declaration
IN CASE OF BAD OPERATION YOU DEMAND THE ATTENDANCE OF QUALIFIED STAFF
The equipment doesn’t comply with EN/ IEC 61000-3-12.
The installer or the user must be sure that it can be connected to the public low voltage power line, if necessary, in consultation with
the network distributor.
1.1.1 Re2T/4T Norm
The symbol on the product or on its packaging indicates that this product may not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you
purchased the product.
1.1.2 Safety Precautions
WELDING AND ARC CUTTING CAN BE HARMFUL TO YOURSELF AND OTHERS. The user must
therefore be educated against the hazards, summarized below, deriving from welding operations.
ELECTRIC SHOCK – May be fatal.
Install and earth the welding machine according to the applicable regulations.
Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing. Isolate
yourselves from both the earth and the workpiece.
Make sure your working position is safe.
FUME AND GASES – May be hazardous to your health.
Keep your head away from fumes.
Work in the presence of adequate ventilation, and use ventilators around the arc to prevent
fume and gases from forming in the work area.
ARC RAYS – May injure the eyes and burn the skin.
Protect your eyes with welding masks fitted with filtered lenses, and protect your body with
appropriate safety garments.
Protect others by installing adequate shields or curtains.
EVOLVE 200 USER MANUAL
3
RISK OF FIRE AND BURNS
Sparks (sprays) may cause fires and burn the skin; you should therefore make sure there are
no inflammable materials in the area, and wear appropriate protective garments.
NOISE
This machine does not directly produce noise exceeding 80dB. The plasma cutting/welding
procedure may produce noise levels beyond said limit; users must therefore implement all
precautions required by law.
PACEMAKERS
The magnetic fields created by high currents may affect the operation of pacemakers. Wearers
of vital electronic equipment (pacemakers) should consult their physician before beginning any
arc welding, cutting, gouging or spot welding operations.
EXPLOSIONS
Do not weld in the vicinity of containers under pressure, or in the presence of explosive dust,
gases or fumes. All cylinders and pressure regulators used in welding operation should be
handled with care.
EVOLVE 200 USER MANUAL
4
1.1.3 Ecodesign Regulations
The equipment has been designed in order to be compliant with the Directive 2009/125/EC and the
Regulation 2019/1784/EU.
Model Minimum power source
efficiency %
Maximum idle state power
consumption (watt) Equivalent model
EVOLVE 200 82 % 45 watt No equivalent model
available
Idle state occurs under the condition specified in below table:
Iddle state
Condition Present
MIG mode X
TIG mode
MMA mode
FAN OFF condition X
The values of efficiency and consumption in idle state have been measured by method and conditions
defined in the product standard EN 60974-1:20XX.
Manufacturer’s name, product name, code number, product number, serial number and date of production
can be read from rating plate.
Serial number plate reference
Serial No. Plate references
1 Manufacturer’s name and address
2 Product name
1
2 3
5
6 7
4
EVOLVE 200 USER MANUAL
5
Typical gas usage for MIG/MAG equipment:
Material type Wire diameter
[mm]
DC electrode positive Speed wire
(m/min)
Shielding gas Gas flow
(lt/min)
A V
Carbon, low
alloy steel
0,9 ÷ 1,1 95 ÷ 200 18 ÷ 22 3,5 – 6,5 Ar 75%, CO2 25% 14 ÷ 19
Aluminium 0,8 ÷ 1,6 90 ÷ 240 18 ÷ 26 5,5 – 9,5 Argon 14 ÷ 19
Austenitic
stainless steel 0,8 ÷ 1,6 85 ÷ 300 21 ÷ 28 3 - 7 Ar 98%, O2 2% /
He 90%, Ar 7,5%
CO2 2,5%
14 ÷ 16
Copper alloy 0,9 ÷ 1,6 175 ÷ 385 23 ÷ 26 6 - 11 Argon 12 ÷ 16
Magnesium 1,6 ÷ 2,4 70 ÷ 335 16 ÷ 26 4 - 15 Argon 24 ÷ 28
TIG Process:
In TIG welding process, gas usage depends on cross-sectional area of the nozzle. For commonly used
torches:
Helium: 14-24 l/min
Argon: 7-16 l/min
Notice: Excessive flow rates will cause turbulence in the gas stream which may aspirate atmospheric
contamination into the welding pool.
Notice: A cross wind or draft moving can disrupt the shielding gas coverage, in the interest of saving of
protective gas, use screen to block air flow.
End of life
At end of life of product, it has to be disposed for recycling in accordance with Directive 2012/19/EU (WEEE).
Information about the dismantling of product and Critical Raw Material (CRM) present in the product can be
found in the website.
3 Serial Number of the product
AA = year of production
BB = week of production
CCC = progressive number
4 Symbol of welding current source type
5 Conformity references
6 Output data
7 Power supply data
7 Protection data / symbols / other
EVOLVE 200 USER MANUAL
6
1.2 Front panel general descriptions
1.2.1 Button descriptions
BUTTON1-MODE：Mode change
BUTTON2-2T/4T：Welding operate mode change
BUTTON3-PROG：Welding materials selection
BUTTON4-SETTINGJOB：Welding technology parameter selection
1.2.2 Knob
KNOB1: Current and wire speed knob
KNOB2: Voltage and ARC length knob
1.2.3 Front panel commands descriptions
FRONT PANEL COMANDS DESCRIPTIONS
Fig.1
KNOB 2
BUTTON2 2T/4T
switch
BUTTON4 SETTING/JOB
BUTTON1 MODE
BUTTON3 PROG.
switch
DISPLAY LCD
KNOB 1
EVOLVE 200 USER MANUAL
7
1.2.4 Front panel display descriptions
During the welding process, the display shows the real output current and
voltage.
At the end of the welding process, the display shows latest welding values
of the output current and voltage.
The latest setting data will be shown in the display when the buttons or the
KNOBs of the control panel are used.
1.3 Boot up self-test and display
1.3.1Boot up interface descriptions
At the power on in the first interface, the machine shows the Serial number
and the last software and firmware installed.
1.3.2 Boot up self-test process and descriptions
At the same time, the fan is controlled for a short period in order to load the fly-back power supply of the
inverter and allow the initial self-test.
The self-test involves check on the inverter, check on the wire feeder motor driver, check on the auxiliary
power supply for the machine and check on the mains cabling of the machine.
If there are errors during the self-test, the corresponding error code will be
shown in the display with a short description of the error. The flow chart
will indicate the errors. During the initial self-test, the errors found are fatal
errors, that means the alarms does not allow the machine to continue and
the display stops other visualizations and shows the error code and
description.
1.3.3 Machine software upgrade descriptions
In this start-up phase, if an update has arrived from the JTE
cloud and for new software, this update remains stored in the
internal wifi and connection board and a message is shown
on the display to tell the operator that he has the option to
accept the download of the new software or to reject it. At this point, the
user can choose to remain using the machine (press NO) as it was before
the last shut down or, accept to upgrade the firmware of the machine
(press YES).
If the operator agrees to download the new software, the display asks the
operator not to turn off the machine and starts uploading the new
software, an upload that takes about a minute.At the end of the upload,
the machine displays the data as the figure in chapter 1.3.1 with the new
software.
EVOLVE 200 USER MANUAL
8
7
4
1.4 Photos of the machine and instructions
Photos of the machine and instructions are as follows:
Code Name Description Refer to schematics
1 PCB MOTHER BOARD TJ010
2 PCB COMMUNICATION BOARD TJ003
3 PCB EMC BOARD TJ013
4 TRANSFORMER THE MAIN TRANSFORMER /
5 MOTOR WIRE FEEDER INTERNAL MIG
WIRE FEEDER
6 DEVICE POLARITY SWITCHING DEVICE POLARITY CHANGE
7 PANEL FRONT PANEL /
2 3
5
1
6
Inhaltsverzeichnis
Andere Jasic Schweißsystem Handbücher
Jasic
Jasic JT-200A Bedienungsanleitung
Jasic
Jasic Arc Series Bedienungsanleitung
Jasic
Jasic Power Arc 160 PFC Bedienungsanleitung
Jasic
Jasic TIG 200P Bedienungsanleitung
Jasic
Jasic TIG 200 AC/DC Analog Bedienungsanleitung
Jasic
Jasic Cut 61 Bedienungsanleitung
Jasic
Jasic MIG 350C Bedienungsanleitung
Jasic
Jasic TIG200 Bedienungsanleitung
Jasic
Jasic TIG180P Bedienungsanleitung
Jasic
Jasic EVO 2.0 EM-160C Bedienungsanleitung
Jasic
Jasic CUT80 (L205) Bedienungsanleitung
Jasic
Jasic ARC 160GS Bedienungsanleitung
Jasic
Jasic MIG 200 PFC Bedienungsanleitung
Jasic
Jasic TIG180 Bedienungsanleitung
Jasic
Jasic TIG Series Bedienungsanleitung
Jasic
Jasic Arc 140 Bedienungsanleitung
Jasic
Jasic MIG 270 Separate Bedienungsanleitung
Jasic
Jasic TIG Series Bedienungsanleitung
Jasic
Jasic Arc 140 Bedienungsanleitung
Jasic
Jasic MIG 250C Bedienungsanleitung
Beliebte Schweißsystem Handbücher anderer Marken
TAFA
TAFA 30*8B35 Bedienungsanleitung
Lincoln Electric
Lincoln Electric INVERTEC V350-PRO CE Bedienungsanleitung
ESAB
ESAB Buddy Arc 145 Bedienungsanleitung
CIGWELD
CIGWELD 636804 Kurzanleitung
Red-D-Arc
Red-D-Arc DC-400 Bedienungsanleitung
Hobart Welding Products
Hobart Welding Products Spool Gun DP 3035-10 Bedienungsanleitung
