Jbc DIT-D Bedienungsanleitung

Premium Soldering station

Ref. DIT-D

English

www.jbctools.com

2 3

Manual ...............................1 unit

Ref. 0014651

Packing List

The following items should be included:

DI Control Unit ...............1 unit

Ref. DI-1D (120V)

DI-2D (230V)

DI-9D (100V)

Stand ..................................1 unit

Ref. AD-SD

Soft Thermal

Insulator Handle ........ 1 unit

Ref. T245-C

Premium soldering station

Ref. DIT-D

Power Cord .....................1 unit

Ref. 0009417 (100V/120V)

0009401 (230V)

Stand cable .................. 1 unit

Ref. 0011283

Tip Cleaner ......................1 unit

Ref. CL9885

Sponge ..............................1 unit

Ref. S0354

Cartridge ..........................1 unit

Ref. C245903

www.jbctools.com

ww w.j bct ool s.c om

4 5

Features USB Connector

JBC Updater

Download the latest software from our website to improve your soldering station.

www.jbctools.com/software.html

Update the station software via USB connection:

Power Socket

DI Control Unit

Ref. DI-1D (120V)

DI-2D (230V)

DI-9D (100V)

Stand

Ref. AD-SD

Stand cable

Ref. 0011283

Equipotential

connector

Cable USB AB

Desoldering

Pump connector

Main switch

Fuse

Soft Thermal Insulator Handle

Ref. T245-C

JBC

Updater

JBC

Manager

JBC Manager

www.jbctools.com/manager.html

Manage and monitor as many stations as your PC can handle by using the JBC Manager. You can

export data to another PC.

Create graphs of the

soldering process in real

time with power and

temperature data.

Manager Settings

Change settings for a

group of JBC stations at

the same time.

any JBC

station

USB

Hub

Cable

USB AB

www.jbctools.com

6 7

Cable collector

Keeps work area

free of cable.

Quick tip changer

The cartridge extractor / inserter system

permits switching cartridges without

interrupting your work.

Adjustable tool holder

Suits your work position.

Adjustable

cable collector

Adjustable Stand

Improve thermal transfer by cleaning the tip after each solder joint.

Tip Cleaner

Optional

Brass wool

Ref. CL6210

Inox wool

Ref. CL6205

Brushes

Ref. CL6220

Tip-tinner

Ref. TT-A

Sand

Ref. CL6211

Splashguard

Non-slip base

Sponge

Ref. S0354

Wiper

Ref. CL0236

Very effective cleaning

method. It leaves a small layer

of solder on the tip to prevent

oxidation between cleaning

and rewetting.

It prevents splashing

of solder particles

when using the brass

wool.

No need to hold the

base while cleaning

tips.

The least harmful cleaning

method. Keep the sponge damp

with distilled water when working

to avoid tip wear.

A temperature resistant receptacle lets

the operator remove excess solder by

gentle tapping or wiping. It can be easily

removed for cleaning.

Tapping: Wiping:

Tap gently to remove

excess solder.

Use the slots to

remove remaining

particles.

www.jbctools.com

Soft foam

Non-slip and soft touch

Blue grip to quickly distinguish

from other handles

ø 1

ø 1,5

ø 3,5

8 9

For general use

Work with C245 Cartridge range.

Compatible Handles

General Purpose Handle

Ref. T245-A

Blue General Purpose Handle

Ref. T245-PA

Non-slip Handle

Ref. T245-B

Soft Thermal Insulator Handle

Ref. T245-C

Note: All models are supplied with a 1.5m cable.

Changing cartridges

1. Removing 2. Inserting 3. Fixing

Place the handle in the

extractor and pull to

remove the cartridge.

Place the handle on top

of the new cartridge and

press down slightly.

Use the holes for fixing the

cartridge* as follows:

A. For straight C210.

B. For curved C210.

C. For curved C245.

D. For straight C245.

Compatible cartridges

The DIT-D works with T245/T470 handles and C245 cartridges or with T210 handles and C210

cartridges. Find the model that best suits your soldering needs in www.jbctools.com

Round Chisel Round

bent

Bevel Special

models

Save time and change cartridges safely without switching the station off.

*Important

It is essential to insert the cartridges as far as the mark for a proper connection.

Mark

www.jbctools.com

Tool in the stand

Actual Temp. 180

Sleep

Tool in the stand after sleep

No heat

Actual Temp. 20

Hibernation

Selected temp.

350

Power 10%

350

Selected temp.

350

Power 10%

Fixed temp.

350

Levels ºC

270 350 400

350

Main menu

4 Counters

Program version

Tool 245

Tool 245 Tool 245

Station settings Tool settings

Back Back

1 Temp unit

Celsius

Maximum temp 4000C

Minimum temp 2000C

4 Nitrogen mode OFF

1 Fix one temp

----

Temp levels set OFF

Sleep delay 0 min

5 Help text OFF

Beep ON

Change PIN

4 Sleep temp 180

Hibern delay 30 min

Temp adjust +0

Exit

1 Reset settings

Station settings

Tool settings

Counters

1 Plugged hours

Working hours 0

Sleep hours 0

4 Hibernation hours 0

Back

5 No tool hours 0

Sleep cycles 0

Desold cycles 0

10 11

3. Hibernation

Operation

The JBC Exclusive Heating System

Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user

can work at a lower temperature and improve the quality of soldering. The tip temperature is further

reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.

1. Work 2. Sleep

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

When the tool is in the stand,

the temperature reduces to

180ºC / 360ºF (preset sleep

temperature).

After longer periods of

inactivity (pre-set to 30 min.),

the power is cut and the

tool cools down to room

temperature.

· Change temperature

(from 90 to 450ºC)

· Select temperature levels

· Fix one temperature

· Change Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

· Set Hibernation delay

(from 0 to 60 min or no

hibernation)

Menu Screen

Original PIN: 0105

The work screen provides

useful information of tool

status in real time.

Displays a specific fixed temp.

Shown once you have

selected temp. levels.

Work Screen

Process Control

Long time in

the stand

www.jbctools.com

12 13

1. Remove the fuse by pulling the black cap.

If necessary use a tool to lever it off.

2. Press the new fuse into the holder and

replace it in the station.

Maintenance

Fuse

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

Clean periodically

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

- Do not use the equipment for any purpose other than soldering or rework. Incorrect use may

cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The tool should be placed in the stand when not in use in order to activate the sleep mode.

The soldering tip, the metal part of the tool and the stand may still be hot even when the station is

turned off. Handle with care, including when adjusting the stand position.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills.

- Heat can cause inflamable products to ignite.

- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance shall not be carried out by children unless supervised.

Safety

Before carrying out maintenance or storage, always allow the equipment to cool and unplug the

stand from the station and the tool.

- Clean the station screen with a glass cleaner

or a damp cloth.

- Use a damp cloth to clean the casing, the stand

and the tool. Alcohol can only be used for cleaning

the metal parts.

- Periodically check that the metal parts of the tool

and stand are clean so that the station can detect

when the tool is in the stand.

- Maintain tip surface clean and tinned prior to

storage in order to avoid tip oxidation. Rusty and

dirty surfaces reduce heat transfer to the solder

joint.

- Periodically check all cable connections.

- Replace a blown fuse as follows:

www.jbctools.com

14 15

Specifications

Premium Soldering station

DIT-1D/ DIT-2D/ DIT-9D

- Total weight: 4.4 kg (9.6 lb)

DI-1D 120V 50/60Hz. Input fuse: 2A. Output: 23.5V.

DI-2D 230V 50/60Hz. Input fuse: 1A. Output: 23.5V.

DI-9D 100V 50/60Hz. Input fuse: 2.5A. Output: 23.5V.

- Weight: 2.2 kg (9.6 lb)

- Dimensions: 90 x 105 x 180 mm

- Temperature Range: from 90°C (190°F) to 450°C (840°F)

- Idle Temp. Stability (still air): ±1.5 ºC / ±3 ºF

- Output Peak Power: 130W

- Tip to ground resistance: <2 ohms

- Tip to ground voltage: <2mV RMS

- Ambient operating temp: 10-40 ºC / 50-104 ºF

- USB connector station-PC

Complies with CE standards

ESD protected housing “skin effect”

Exploded View

www.jbctools.com

0014651-0115

Warranty

JBC’s 2 year warranty covers this equipment

against all manufacturing defects, including the

replacement of defective parts and labour.

Warranty does not cover product wear due to use

or mis-use.

In order for the warranty to be valid, equipment

must be returned, postage paid, to the dealer

where it was purchased.

This product should not be thrown in the garbage.

In accordance with the European directive 2002/96/EC, electronic equipment at the end of their life

must be collected and returned to an authorized recycling facility.

www.jbctools.com

Andere Handbücher für DIT-D

Inhaltsverzeichnis

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc DIT-D Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken