JBL AS5 Bedienungsanleitung

thank you for choosing JBL. For over 50 years, JBL has

been involved in every aspect of musical and film recording and

reproduction, from live performances to monitoring the recordings

you play in your home, car, or office.

We’re confident that the JBL loudspeakers you have

chosen will provide every note of enjoyment that you expected –

and that when you think about purchasing additional audio equip-

ment for your home, car, or office you will once again choose JBL.

Please take a moment to complete the enclosed profile card. It

enables us to keep you posted on our latest advancements, and

helps us to better understand our customers and build products

that meet your needs and expectations.

JBL Consumer Products

AS5, AS6,

AS8, AS65C

& AS SUB

simple

set-up guide

AS Series Owner’s Manual 9/11/98 12:51 PM Page 1

one. Speaker Placement

AS5, AS6, AS8 as front speakers

AS5, AS6, AS8 as rear speakers

AS65C in ceiling AS SUB

5 – 6 ft.

AS Series Owner’s Manual 9/11/98 12:51 PM Page 2

two. Speaker Connections

Speakers and electronics ter-

minals have corresponding (+)

and (–) terminals. It is impor-

tant to connect both speakers

identically: (+) on the speaker

to (+) on the amplifier and (–)

on the speaker to (–) on the

amplifier. Wiring “out of phase”

results in thin sound, weak bass

and a poor stereo image.

Connection Tips

AS5, AS6, AS8, AS65C

AS SUB

Wire Length Recommended Size

Up to 20 ft. 16 gauge

Up to 30 ft. 12 gauge

Greater than 30 ft. 10 gauge

– +– +

Front or Rear Speaker Outputs

LEFT RIGHT

–+–+

– +– +

– +– + – + – +

Receiver/Amplifier

LEFT RIGHT

Left Right

– + – +

Right SatelliteLeft Satellite Subwoofer

Output

Input

Output

Input

The wires for both speakers

should be the same length. If

one speaker is placed closer to

the amplifier than the other,

hide the excess wire behind

the wall.

The AS SUB has two pairs of

speaker connections. Connect

one set of terminals (input)

to the left channel of your

amplifier. Connect the other set

of terminals (input) to the right

channel of your amplifier. Then

connect the left satellite to the

left output and the right satel-

lite to the right output.

Note: Diagram is for illustrative

purposes. For each channel it

does not matter which pair of

connectors is used for the input

or which pair is used for the

output.

AS Series Owner’s Manual 9/11/98 12:51 PM Page 3

three. Installation

AS5, AS6, AS8

Phillips #2 screwdriver Measuring tape Utility knife

Pencil Carpenter’s level Awl

Installation Kit

Template Speaker frame Thread-forming screws

Retainer clips Four mounting brackets

Tools Needed

The AS Series in-wall speakers

were

designed to be easily

installed. However, if you

are unsure of your ability to

properly install these loudspeak-

ers, please contact your dealer

or a qualified installer.

Short phillips head screws

AS Series Owner’s Manual 9/11/98 12:51 PM Page 4

Step One:

Remove the grille from the

speaker frame.

Step Two:

Determine the correct speaker

location.

Template

Tape

Level

Step Three:

Determine the speaker-frame

location.

≥1-1/2"

≥1-1/2" ≥1-1/2"

Step Four:

Cut the dry wall.

Step Five:

Place the mounting bracket on

the speaker frame using the

mounting guides (marked 3/8",

1/2", 5/8", and 3/4") corre-

sponding to the thickness of

the dry wall.

Kerf Line

Step Six:

Place the frame assembly in

the wall.

Step Seven:

Connect the speaker wires to

the baffle assembly and install

baffle assembly in frame.

Do not overtighten the baffle

screws.

Step Eight:

Replace the metal grille.

Existing Construction

AS Series Owner’s Manual 9/11/98 12:51 PM Page 5

New Construction

Step One:

Remove the grille from the

speaker frame.

Step Three:

Attach the proper mounting

brackets, marked and preset at

3/8", 1/2", 5/8", and 3/4", corre-

sponding to the thickness of

the dry wall, to the speaker

frame.

Step Two:

Determine the correct speaker

location.

≥1-1/2"

≥1-1/2" ≥1-1/2"

Step Four:

Nail or screw the speaker-frame

assembly to the wall studs and

route the wires through the

frame opening.

Step Five:

Cut the drywall.

Step Six:

Connect the speaker wires to

the baffle assembly and install

baffle assembly in frame. Do

not overtighten the baffle

screws.

Step Seven:

Replace the metal grille.

After the Drywall is Installed

AS Series Owner’s Manual 9/11/98 12:51 PM Page 6

AS SUB

Step One:

Remove the grille from the

subwoofer frame.

Step Two:

Determine the correct

subwoofer location.

≥1-1/2"

≥1-1/2" ≥1-1/2"

Step Three:

Cut the drywall.

Step Four:

Loosen the eight phillips head

screws until the locking tabs

turn inward.

Step Five:

Connect the speaker wires to

the baffle assembly.

Step Six:

Place the subwoofer in the wall.

Step Seven:

Screw down each of the eight

phillips head screws. The tabs

will swivel into place and

secure the unit to the rear

surface of the drywall.

Step Eight:

Replace the metal grille.

AS Series Owner’s Manual 9/11/98 12:51 PM Page 7

AS65C

Step One:

Remove the grille from the

speaker frame.

Step Two:

Determine the correct speaker

location.

≥1-1/2"

Step Three:

Cut the drywall.

Step Five:

Loosen the three phillips head

screws on the frame until the

locking tabs turn inward.

Step Four:

Connect the speaker wires to

the speaker.

Step Six:

Place the frame assembly in

the wall.

Step Seven:

Screw down each of the three

phillips head screws. The tabs

will swivel into place and

secure the unit to the rear

surface of the drywall.

Step Eight:

Replace the metal grille.

AS Series Owner’s Manual 9/11/98 12:51 PM Page 8

Painting the Speaker Frame and Grille

AS Series loudspeakers can be

painted to match any style of

decor. If you wish to change

their color, the satin finish on

the grille and frame will func-

tion as a primer coat. Before

painting, install the paint guard

(in the assembly kit) securely

into the recess in the baffle.

This will protect the speaker

components and baffle from

paint residue.

Use a high-quality spray paint,

and apply a thin coat of color.

Be certain the grille perfora-

tions remain free of paint.

Filling them with paint will

diminish the sound quality.

Note: Gently remove the

acoustical foam blanket from

the grille before painting.

Reattach the blanket after the

paint has dried.

AS Series Owner’s Manual 9/11/98 12:51 PM Page 9

If there is no sound from

either of the speakers, check

the following:

• Receiver/amplifier is on and a

source is playing.

• Check all wires and connec-

tions between receiver/amplifier

and speakers. Make sure all wires

are connected. Make sure none

of the speaker wires are frayed,

cut, or punctured.

• Review proper operation of

your receiver/amplifier.

If there is no sound coming

from one speaker, check the

following:

• Check the “Balance” control on

your receiver/amplifier.

• Check all wires and connec-

tions between receiver/amplifier

and speakers. Make sure all wires

are connected. Make sure none

of the speaker wires are frayed,

cut, or punctured.

If there is low bass output,

check the following:

• Make sure the connections to

the left and right “Speaker

Inputs” have the correct polarity

(+ and –).

If the system plays at low vol-

umes but shuts off as volume is

increased, check the following:

• Check all wires and connec-

tions between receiver/amplifier

and speakers. Make sure all wires

are connected. Make sure none

of the speaker wires are frayed,

cut, or punctured.

• If more than one pair of main

speakers is being used, check the

minimum impedance require-

ments of your receiver/amplifier.

Troubleshooting

AS Series Owner’s Manual 9/11/98 12:51 PM Page 10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JBL Sprecher Handbücher

JBL

JBL LSR6325P-1 Bedienungsanleitung

JBL

JBL 940T Bedienungsanleitung

JBL

JBL Control Control 29AV Bedienungsanleitung

JBL

JBL L Series Bedienungsanleitung

JBL

JBL SCS 138 Subwoofer Bedienungsanleitung

JBL

JBL 4318 Bedienungsanleitung

JBL

JBL CONTROL NOW Bedienungsanleitung

JBL

JBL S4HC Synthesis Four Montageanleitung

JBL

JBL LX44 Gebrauchsanweisung

JBL

JBL JBL400 Bedienungsanleitung

JBL

JBL JRX115 Bedienungsanleitung

JBL

JBL EON210P Bedienungsanleitung

JBL

JBL Control 30 Bedienungsanleitung

JBL

JBL Studio S36AWII Bedienungsanleitung

JBL

JBL Pulse3 Bedienungsanleitung

JBL

JBL CHARGE Bedienungsanleitung

JBL

JBL CINEMA SB200 Bedienungsanleitung

JBL

JBL EON ONE PA Bedienungsanleitung

JBL

JBL 300 Series Bedienungsanleitung

JBL

JBL VP7212 Bedienungsanleitung

JBL

JBL VT4889ADP Bedienungsanleitung

JBL

JBL Control 1X/1Xtreme/One Betriebsanleitung

JBL

JBL CFSERIES Bedienungsanleitung

JBL

JBL Authentics L 16 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung