JCROffroad BR6RMP Konfigurationshandbuch

Inhaltsverzeichnis

Andere JCROffroad Autozubehör Handbücher

JCROffroad

JCROffroad JTRWP Bedienungsanleitung

JCROffroad

JCROffroad XJCB-PC Bedienungsanleitung

JCROffroad

JCROffroad BR6TD Konfigurationshandbuch

JCROffroad

JCROffroad JT Konfigurationshandbuch

JCROffroad

JCROffroad MOLLE Konfigurationshandbuch

JCROffroad

JCROffroad LPRLC2 Konfigurationshandbuch

JCROffroad

JCROffroad JKSD-FL Bedienungsanleitung

JCROffroad

JCROffroad XJRK Bedienungsanleitung

JCROffroad

JCROffroad JT OVERLAND BED RACK Konfigurationshandbuch

JCROffroad

JCROffroad 6TH GEN BRONCO Konfigurationshandbuch

JCROffroad

JCROffroad 6TH GEN BRONCO Konfigurationshandbuch

JCROffroad

JCROffroad OGFL-BR6G Bedienungsanleitung

JCROffroad

JCROffroad JT Konfigurationshandbuch

JCROffroad

JCROffroad 6TH GEN BRONCO Bedienungsanleitung

JCROffroad

JCROffroad REAR MOLLE PANEL Konfigurationshandbuch

JCROffroad

JCROffroad BR6-UPRS Konfigurationshandbuch

JCROffroad

JCROffroad JK WRANGLER Konfigurationshandbuch

JCROffroad

JCROffroad VRK-SAM Bedienungsanleitung

JCROffroad

JCROffroad BR6RK-HT Konfigurationshandbuch

JCROffroad

JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Konfigurationshandbuch

JCROffroad

JCROffroad DIY-XJ-F-WN Bedienungsanleitung

JCROffroad

JCROffroad XJRC Konfigurationshandbuch

JCROffroad

JCROffroad UNI-FPF-PC Konfigurationshandbuch

JCROffroad

JCROffroad JLRK Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

4 DOOR 6TH GEN BRONCO REAR

WINDOW MOLLE PANEL.....................2

2 DOOR 6TH GEN BRONCO REAR

WINDOW MOLLE PANEL.....................7

TABLE OF CONTENTS

Thank you for purchasing from JcrOroad! Checkout our website, www.jcroroad.com for other great o-road

products. Be sure to rate and review our product online. If you have any questions or are missing parts, please

don’t hesitate to call us at 269-353-1184!

Please read the mounting instructions below carefully before attempting to install.

Be sure to check out the install video on the product page, if available.

4 DOOR 6TH GEN BRONCO

REAR WINDOW

MOLLE PANEL

INSTALL INSTRUCTIONS

INCLUDED HARDWARE

4x

4x

1/4"-20

Serr. Flange Nut

1/4"-20 X 3/4"

Button Head 3x 25mm M8

Button Head

INCLUDED PARTS

1x

1x

1x 1x

1x

HARD TOP ONLY SOFT TOP ONLY

1Start by popping the small plastic panel beneath the rear window out of

place. Then, detach the nearest seat belt from its mounting point. To do

this, pop the plastic cover o of it by pulling out on the top edge of it.

Doing this will expose a bolt. Unscrew that bolt using a T50 socket and

then you will need to thread the push nut o of the back of the bolt in

order to get the spacer o. Set everything to the side for now, making sure

not to lose any hardware.

ASSEMBLY

2Next, loosely attach the mounts to the vehicle. The rear mount attaches

directly to the rear roll bar using an M8 bolt through a factory threaded

hole as shown below on the le. The lower mounts are slightly dierent

depending on whether you have a so top or hard top. The hard top

mount attaches behind the plastic panel you pulled o using two more

M8 bolts in threaded factory holes as shown below on the right. The so

top mount needs to be installed into the top two so top mounting holes

using the factory hardware. These holes are located behind the plastic

panel as well you removed as well. The front mount gets sandwiched

between the seatbelt retainer and the spacer you removed. Place the wider

slot onto the bolt behind the retainer, and then reinstall the spacer and

push nut. Then, reinstall the whole thing back into the seat belt’s factory

mount. Make sure that all the mounting faces for the MOLLE panel are

pointing out, away from the window.

3Next, loosely mount the panel to the mounts using the four 1/4”-20 X 3/4”

button head bolts and 1/4”-20 serr. ﬂange nuts. Once all bolts are loosely

in place, adjust the position of the panel in the window until you are happy

with it. Then, tighten everything into place, starting with the bolts holding

the upper two mounts to the frame, followed by the lower mount. Finally,

tighten the bolts holding the panel to the mounts. When tightening the

seatbelt back into place, torque it to 40  lbs.

ASSEMBLY

Thank you for purchasing from JcrOroad! Checkout our website, www.jcroroad.com for other great o-road

products. Be sure to rate and review our product online. If you have any questions or are missing parts, please

don’t hesitate to call us at 269-353-1184!

Please read the mounting instructions below carefully before attempting to install.

Be sure to check out the install video on the product page, if available.

2 DOOR 6TH GEN BRONCO

REAR WINDOW

MOLLE PANEL

INSTALL INSTRUCTIONS

INCLUDED HARDWARE

6x

6x

1/4"-20

Serr. Flange Nut

1/4"-20 X 3/4"

Button Head 3x 25mm M8

Button Head

INCLUDED PARTS

1x

1x 3x

1x

1Start by loosely installing all the mounts to the inside of the rear window.

The three small L shaped brackets get installed into the hardtop mounting

points on the bottom of the window using the factory hardware. The

longer leg of the bracket is the one that gets mounted to the vehicle. The

shorter leg should be pointing up and positioned towards the inside of the

mounting bolts. The ﬂat bracket installs into the middle of the outside face

of the roll cage through two factory holes using the provided M8 button

heads. The larger L shaped bracket mounts to the top of the face of the roll

cage, in front of the ﬂat bracket.

ASSEMBLY