JCROffroad MOLLE Konfigurationshandbuch

Thank you for purchasing from JcrOroad! Checkout our website, www.jcroroad.com for other great o-road

products. Be sure to rate and review our product online. If you have any questions or are missing parts, please

don’t hesitate to call us at 269-353-1184!

Please read the mounting instructions below carefully before attempting to install.

Be sure to check out the install video on the product page, if available.

6TH GEN BRONCO

OVERHEAD

MOLLE PANEL

INSTALL INSTRUCTIONS

INCLUDED HARDWARE

8x

1/4"-20 X 3/4"

Button Head

8x

1/4"-20

. Flange Nut

INCLUDED PARTS

1x

1x

1x

1L/1R

1Before starting the installation, you will need to some disassembly in your

vehicle. Start by removing the sun visor catches which are held in place by

one bolt in the inside of each. This requires a T20 torx bit.

ASSEMBLY

2Next, gently but ﬁrmly apply downward pressure on the top of the

overhead console in order to pull it out of its clips (circled below). Once it is

hanging down you will have room to access the area behind it.

4With everything out of the way, you will be able to see the bolts holding

the roof latches in place. Remove the inner two bolts using a T50 torx bit

and install the front mounting bracket into those holes using the factory

hardware. The bracket should be oriented so that the cutout is on the top

and to the right of center. Before tightening it into place, push it all the

way up so it is tight to the metal on the windshield frame.

ASSEMBLY

3For the overhead console to be able to snap back into place later, you will

need to trim roughly 1/4” from the top edge of the plastic. Simply cut a

straight line across, just above the bend radius as shown below.

6With both side mounts loosely in place, mount the cross bar between

them, from the bottom, using the provided 1/4”-20 bolts and serr. ﬂange

nuts.

ASSEMBLY

5Next, loosely install the side mounting brackets. The hooked side of each

slides into the slots in the top of the roll bar just behind the front seats. It

can then be bolted into the factory threaded hole that lines up with the

hole in the bracket using the hardware that is already there. To remove

these bolts you will need an 8mm socket. Each side mount should be

oriented so that the hook is in the slot and the slotted ﬂange is towards

the front of the vehicle.

PASSENGERDRIVER

ASSEMBLY

7Once everything is in place, mount the MOLLE panel to the bottom

of the cross bar and front mounting bracket using the same 1/4”-20

hardware. The narrower end of the panel is the front, and the sides should

be pointing up. Finally, go back and tighten all the bolts down fully and

reassemble the overhead console in the reverse order of how you took it

apart.

Inhaltsverzeichnis

Andere JCROffroad Autozubehör Handbücher

JCROffroad

JCROffroad JKSD-FL Bedienungsanleitung

JCROffroad

JCROffroad OGFL-BR6G Bedienungsanleitung

JCROffroad

JCROffroad JT Konfigurationshandbuch

JCROffroad

JCROffroad JT Konfigurationshandbuch

JCROffroad

JCROffroad XJCB-PC Bedienungsanleitung

JCROffroad

JCROffroad REAR MOLLE PANEL Konfigurationshandbuch

JCROffroad

JCROffroad JK WRANGLER Konfigurationshandbuch

JCROffroad

JCROffroad JLRK Bedienungsanleitung

JCROffroad

JCROffroad DIY-XJ-F-WN Bedienungsanleitung

JCROffroad

JCROffroad LPRLC2 Konfigurationshandbuch

JCROffroad

JCROffroad 6TH GEN BRONCO Konfigurationshandbuch

JCROffroad

JCROffroad XJRC Konfigurationshandbuch

JCROffroad

JCROffroad BR6RK-HT Konfigurationshandbuch

JCROffroad

JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Konfigurationshandbuch

JCROffroad

JCROffroad BR6-UPRS Konfigurationshandbuch

JCROffroad

JCROffroad JT OVERLAND BED RACK Konfigurationshandbuch

JCROffroad

JCROffroad JTRWP Bedienungsanleitung

JCROffroad

JCROffroad BR6RMP Konfigurationshandbuch

JCROffroad

JCROffroad XJRK Bedienungsanleitung

JCROffroad

JCROffroad UNI-FPF-PC Konfigurationshandbuch

JCROffroad

JCROffroad XJ Konfigurationshandbuch

JCROffroad

JCROffroad BR6TD Konfigurationshandbuch

JCROffroad

JCROffroad 6TH GEN BRONCO Bedienungsanleitung

JCROffroad

JCROffroad 6TH GEN BRONCO Konfigurationshandbuch

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung