Jimmy BX7 Bedienungsanleitung
User Manual Anti-mite Vacuum Cleaner
Instrukcja obsługi Odkurzacz do roztoczy
Bedienungsanleitung Staubsauger
Manuel d'utilisation Aspirateur anti-acariens
Manuale d’uso Aspiratore anti-acaro
Manual del usuario Aspirador antiácaros
Руководство пользователя Пылесос для удаления пылевых клещей
BX7
1
Contents
English 2
Polski 10
Deutsch 18
Français 26
Italiano34
Español42
русскийязык50
2
Safety notes
1. Please read this instruction manual carefully before use and keep it properly for future use.
2. The product design and spec in the manual may slightly vary from the actual product. Please
take physical product shall prevail.
3. Never leave the machine working without supervision.
4. Please turn off the power switch and unplug the power cord if the machine is to be idled. Do
Not unplug the power cord with humid hand in case of electric shock.
5. Cut the power source in maintenance or off-service.
6. Keep the power cord away from sharp objects and do not drag the cord to move the machine
in case of cord damage.
7. For safety reasons, please do not use the product to clean hot objects such as carbon,
cigarette butts, sharp objects such as broken glass, corrosive liquids, ammable and explosive
materials such as gasoline and alcohol. Otherwise it may cause product damage or re.
8. Do not use this product to clean water or wet dust. Do Not operate it in humid places (such
as bathroom, toilet, laundry room, etc.) to avoid malfunction.
9. Do Not place the machine near heating appliances or expose it to direct sunlight in case of
re hazard.
10. Keep this product beyond the reach of special individual such as children without adult
supervision.
11. Do Not operate this machine with suction port blocked in case of product damage.
12. The product has UV light, for safety reasons, Do Not look at the bottom of the machine
when the power is on in case of ultraviolet rays harming.
13. Please do not let UV light shine on plants to avoid damaging them. Do not concentrate UV
light in one place for continuous use, which may cause damage to the cleaned objects.
14. Do Not sit on this product in case of personal injury and product damage.
15. Do Not remove the brushroll cover or force the cover outward when the machine is powered
on for safety reasons.
16. This product can ONLY use for cleaning of textiles such as mattresses, blankets, pillows,
sofas, etc.
17. If the power cord is damaged, please ask for professional help of the manufacturer and other
professionals for safety reasons.
3
Product installation
Parts name
On/Off button
Dust cup release
button
Dust cup
Backward window
LED screen
Top window
Mode button
Power cord
Brushroll motor outlet
Top brushroll cover
Brushroll cover latch
Ultrasonic generator
Backward brushroll
Top brushroll
UV LED light
Backward brushroll
cover
Mini brush MIF lter
Negative Ions air outlet
Air outlet
Packing list
Name Vacuum Cleaner MIF Filter Mini brush User Guide
Quantity 1 1 1 1
4
Use of the product
Function description
Vacuum+Tap+UV mode
After power on, the anti-mite vacuum cleaner starts with Vacuum +Tap +UV mode by default,
the corresponding indicator light will be on, and the machine will start vacuuming function,
brushroll tapping function, the UV light dust mite-removal function and the negative ion function.
(Figure 1)
Vacuum+Tap mode
When the machine is in Vacuum+Tap+UV Mode, press mode button once to change to
Vacuum+Tap mode. Corresponding indicator will be one and the machine will start vacuuming
function, brushroll tapping function and the negative ion function.(Figure 2)
Vacuum+UV mode
When the machine is in Vacuum+Tap Mode, press
mode button once, press mode button once to change
to Vacuum+UV mode.Corresponding indicator will be
one and the machine will start vacuuming function, the
UV light dust mite-removal function and the negative
ion function.(Figure 3)
When machine is in Vacuum+UV mode, press mode
button once, the vacuum cleaner goes back to
Vacuum+Tap+UV mode. The modes cycles in turn by
press mode button.
Dust level display
When the cleaned surface is in a clean state, the dust
level bar is blue.When it is in a dirty state, the dust level
bar is red.When it is in a slightly dirty state, the dust
level bar is yellow.
As the dust level increases,the dust level bar slowly
changes from blue to yellow,nd nally to red.As the dust
level decreases, the dust level bar slowly changes from
red to yellow until it is all blue.
1
2
3
Tap mode
Negative ions display
Dust level display
UV mode
Vacuum mode
Brushroll blockage
indicator
5
Brushroll blockage indicator
When the brushroll is blocked,the machine will stop
and the indicator turns red.(Figure 4)
Note:
1.When the dust over the Max line,please clean the dust cup
and MIF lter in time.
2.For safety reasons, the UV light only works within 3cm above
object as well as less than 30 inclination degrees. Otherwise,
the UV light will automatically turn off.
3.Do not touch the air outlet on the bottom of the machine in
case of hand scald.
Cleaning and maintenance
Note:
1.MIF Filters is available for sale at JIMMY distributor.
2.It is recommended to clean the dust cup after each use.
when the lter is blocked due to excessive dust accumulation,
it needs to be cleaned and replaced if necessary.
Dust cup and lter cleaning
1.Turn off the machine and unplug the power cord. Then
press the release button and lift upward.(Figure 5)
2.Hold dust cup lid and rotate to remove cyclone
assembly from dust cup for cleaning.（Figure 6）
3.Remove the MIF filter along the direction shown in
the figure for better cleaning.（Figure 6）
Note:
1.Do Not miss the lter!
2.Use water or neutral reagents to clean dust cup and wipe
with dry cloths. Do not wash the lter until it is necessary. Make
sure the lter and dust cup are completely dry before another
use.
Brushroll cleaning and installation
Turn off the machine and unplug the power cord, slide
the brushroll cover latch with hand from locked position
to unlock position to remove the brushroll to clean up
with the mini- brush(Figure 7).After brushroll cleaning,
install the brushroll and the brushroll cover into the machine in turn.
If the backward brushroll is hard to clean after being entangled by hair, thread and other
filaments, take out the backward brushroll and use a blade to cut the hair, thread and other
laments along the backward brushroll for cleaning. (Figure 8)
4
5
6
7
8
Handle
Dust cup
release button
MIF lter
Cyclone
Lock
Unlock
Backward brushroll
Mini Brush
6
Note:
1.For safety reasons, please turn off the machine and unplug power cord before cleaning brushroll.
2.Do not use water to clean the brushroll to avoid water entering the bearings and causing bearing rust..
3.Use a dry cloth to clean the machine. Liquids like gasoline, alcohol, lacquer thinner will cause crack or
colour fading and cannot be used.
Maintenance and storage
Please clean dust cup and lter after each use for further use. It is recommended to replace a
lter after 30-50 hours of working time(depending on specic situation) for better use.
Any paper, lead glass, plastic will greatly affect the effect of UV light. Dust or stain on UV light
cover will affect the effect of UV light. Please wipe and clean the UV light cover regularly for
better use.
Do not touch the UV light cover as dirt will affect UV light effect.
Put the machine in cool and dry place if the machine is to be idled. Do Not leave it in direct
sunlight or humid environment.
7
Trouble shooting
Please check the following trouble points before go to the maintenance department.
Trouble Possible Reasons Solutions
Power Failure
Power cord is not rmly Insert the power cord rmly
On/off switch is not pressed
down Press the On/Off button
Low suction power
Suction port clogged Clean up suction port
Dust accumulation on lter Clean up the cup and the MIF
lter
Dust accumulation on cyclone Clean up dust cup
UV light failure
The machine is placed upright Machine tilted no more than 30
degrees
UV light damage Contact after-sale service
Sensor window is contaminate Clean the sensor window with
a half-dry cloth
Brushroll failure
Brushroll tangled with foreign
matter
Remove the brushroll and clean
up according to user guide
Belt broken Contact after-sale service
Note:If fault remains after adopting the following solutions, contact after sale service or local distributor
immediately.
8
Product specications
Technical parameter
Model BX7
Rated voltage 220-240V~
Rated frequency 50-60Hz
Rated power 600W
Circuit diagram
UV Light
PCB
Negative ion
generator
M1
M2
220-240V~ 50-60Hz
Vacuum motor
Brushroll
motor
EMC
PCB
Right Infrared
PCB
On/off PCB
Ultrasonic
generator
Main PCB
Left Infrared
PCB
Dust sensor
PCB
Power supply PCB
Inhaltsverzeichnis
Sprachen:
Andere Jimmy Staubsauger Handbücher
Jimmy
Jimmy SF8 Bedienungsanleitung
Jimmy
Jimmy JV71 Bedienungsanleitung
Jimmy
Jimmy BX7 Pro Bedienungsanleitung
Jimmy
Jimmy H10 Pro Bedienungsanleitung
Jimmy
Jimmy BX6 Pro Bedienungsanleitung
Jimmy
Jimmy BD7 Pro Bedienungsanleitung
Jimmy
Jimmy WB55 Bedienungsanleitung
Jimmy
Jimmy JV71 Bedienungsanleitung
Jimmy
Jimmy H8 Pro Bedienungsanleitung
Jimmy
Jimmy H9 Flex Bedienungsanleitung
Jimmy
Jimmy B6 Pro Bedienungsanleitung
Jimmy
Jimmy HW10 Pro Bedienungsanleitung
Jimmy
Jimmy HW10 Bedienungsanleitung
Jimmy
Jimmy JV83 Bedienungsanleitung
Jimmy
Jimmy HW8 Bedienungsanleitung
Jimmy
Jimmy HW9 Bedienungsanleitung
Jimmy
Jimmy JV83 Bedienungsanleitung
Jimmy
Jimmy JV12 Bedienungsanleitung
Jimmy
Jimmy VW302 Bedienungsanleitung
Jimmy
Jimmy BX6 Bedienungsanleitung
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
