Jimmy H9 Flex Bedienungsanleitung
Instruction Manual Vacuum Cleaner
Instrukcja obsługi Odkurzacz Jimmy
Bedienungsanleitung Staubsauger
Manuel d'instruction Aspirateur
Manuale D’Uso Scopa elettrica senza lo
Manual de instrucciones Aspirador
Руководство по эксплуатации Пылесос
H9 Flex
1
Contents
English 2
Polski 15
Deutsch 28
Français 42
Italiano 55
Español 68
русский язык 81
2
Parts Name
1.Floor head release button
3.Metal tube release button
5.Switch button
7.LED screen
9.Charger
11.Crevice tool
13.Electric mattress head
15.Soft brush
17.Carpet brushroll
2.Flexible metal tube
4.On/o button
6.Battery pack release button
8.Dust cup release latch
10.Charging holder
12.Upholstery tool
14.Connector
16.Stretch hose
12
9
11
13
14
16
17
15
3
4
5
1
2
6
7
8
10
3
Name Handheld
Vacuum Cleaner
Electric oor
head
Electric mattress
head Upholstery tool crevice tool
Amount 1 1 1 1 1
Name Soft brush Charging holder Connector Stretch hose Flexible metal tube
Amount 1 1 1 1 1
Name Carpet brushroll Charger Screw Expansion pipe Instruction manual
Amount 1 1 2 2 1
Packing List
Product Assembly
Assemble electric oor head with
metal tube
Hold the oor head with left hand, use right hand
to insert the metal tube vertically into oor head,
align with the conductive needle, press the
handle until a “click” sound is heard.
Attention:Keep the handle and oor head in the same
direction, conductive needle shall align with the socket.
When packing, storing or cleaning, if the electric
oor head needs to be removed, press the
brush release button as shown in the picture
and pull the electric oor head in the direction
shown in the picture.
Assemble battery pack and handheld
vacuum Cleaner
Assembly of battery pack: hold the hand-
held vacuum cleaner in one hand, hold the
battery pack in the other hand, aim at the guiding groove on the body, slide in the battery pack
according to the arrow direction shown in the picture. Pull the battery pack after installation to
make sure it does not get loose.
Attention: when the vacuum cleaner is long idled, please remove the battery, pack the product and store it in a cool
and dry place, avoid direct sunlight or humid environment.
Assemble metal tube and handheld vacuum
First, assemble oor head and metal tube according to the method of assembling electric oor
head and metal tube.
1
2
4
Assemble the oor head with metal tube
assembly and handheld vacuum cleaner: as
shown in the picture, align the conductive
needle of the metal tube with the coupler of the
suction nozzle, push up until a “click” sound is
heard.
Assembly of accessories
For the convenience of use, this product is
specially equipped with some accessories for
the hand-held part of the vacuum cleaner. When you use the handheld vacuum cleaner alone,
you can directly connect the accessories according to your needs or connect the accessories
through the stretch hose.
H9 Flex
Electric mattress brush
Upholstery tool
Crevice tool
Soft brush
Stretch hose
Connector
Carpet brushroll
model
Name
Connect electric mattress head,crevice tool, upholstery tool and dusting brush to handheld
vacuum as the picture.
3
5
Accessories Connection List
Expansion pipe Charging holder
Screw
① ② ③
4
Use of Vacuum
Charging
Attention: When use the product for rst time, battery
power is not full. Need to charge the vacuum before
using.
Charging holder assembly
Put the vacuum cleaner in the holder, and lean the
vacuum cleaner against the wall, place the holder in
the position that vacuum cleaner oor head does not
touch ground. Take o the handheld vacuum cleaner,
place expansion pipe on the wall and place the holder
to the expansion pipe position, then lock in the screw.
After assembly completed, put the vacuum to charger
holder to charge or store.
Attention: Do not x the holder to bathroom or other humid
wall.
6
Charging of vacuum cleaner
When the vacuum cleaner power is insucient, charge the vacuum cleaner in time ; When the
voltage is too low, to protect the battery, vacuum cleaner will be automatic power-o, at this time
the vacuum cleaner need to be charged. When charging, plug the charger connector into the A/
C power socket, hang the handheld vacuum cleaner on the holder to start charging. When the
handheld vacuum cleaner LED display shows an increase in power, it indicates that the vacuum
cleaner is charging. When charging is completed, LED display show 100% power.
Attention: When battery power is below ≤20%, if product is working in Max mode , it will change to Eco mode
automatically. When battery power runs o, product will turn o automatically.
Attention: If vacuum cleaner is long idled, charge the battery every three months to avoid battery failure.
After charging, please pull the charger plug o power socket and stop charging.
Attention: if power cord is damaged, to avoid danger, it must be replaced by professional sta of the manufacturer,
repairing agent or similar department.
Use of handheld vacuum and LED screen contents
Take the vacuum cleaner o the storage holder,
press the on/o button to start or stop the vacuum
cleaner. Mode button can adjust working mode.
When machine is turned on, it works in Auto mode,
press the mode button to switch to the sequence
of Turbo- Max - Eco-Auto mode. During mode
switch the mode will be displayed in LED screen.
Middle of LED screen displays product run time
left in current mode. When mode is changed, left
run time will also change accordingly.
When product works in Max mode and battery
power drops below 20%, to extend product run
time, product will automatically switch from Max to
Eco mode. After battery is charged to higher than
20% power, product can work in Max mode.
When the product is working in Auto mode, it will
adjust working power basing on the dust content
and the oor type it detects, in order to achieve
higher cleaning eciency. Under Auto mode,
LED screen display Auto regardless how high the
working power is.
Battery pack
release button
Switch button
On/o button
LED screen
Dust release button
5
6
7
Bending button
8
The product is equipped with dust content
sensor. On LED screen bottom there is a light
strip to display the dust content. As dust content
decreases from high to low, the red colour
decreases and blue colour increases. When the
strip is completely blue, the cleaning surface is
clean. Cleanness of the cleaning surface can be
visually displayed through LED screen.
Use of Flexible Metal Tube
The exible metal tube has two modes: vertical
and bending. The vertical mode is equivalent to
the normal metal tube. The bending mode can
be used for cleaning under the table bottom,
bed bottom, etc. When the bending mode is
needed, press the bending button as shown in
the g picture, and the metal tube can achieve
0-90°bending angle.
Use of electric oor head
Electric oor head is suitable to clean all kinds of
oor like hard oor, tile and carpet etc. Product
comes with an extra carpet brushroll can be
replaced to the oor head to deep clean carpet.
Attention: During the operation of the electric oor head,
if there is a large volume of foreign matter inhaled or
too much fiber wound, or even a child in the play of
the machine mistakenly put his hand into the nozzle,
resulting in the brushroll abnormal stop, the electric oor
head will stop working, in order to protect personal safety
and brush motor.
Use of accessories
Crevice tool: suitable for cleaning crevice, door
or window corners and other narrow gaps.
Upholstery tool: suitable for cleaning closet,
windowsill, sofa and table surface.
9
Combination brushroll Carpet brushroll
10
7
Eco
min
Auto
min
Turbo
min
Max
min
8
Soft brush: suitable for cleaning easy to scratch
furniture like bookshelf, handicraft etc.
Stretch hose: suitable for connecting with other
tools to clean hard to reach areas.
Electric mattress head: Suitable for sofa and
bed mattress. The brushroll beats out and then
cleans the dust mite and allergen from deep sofa
or bed.
Connector: Can be connected to other tools and
bend to dierent angle to clean dust on top of
high cabinets or dust on the roof.
Cleaning and Replacing Parts
Attention:
1.HEPA filter is available for sale from local vacuum
cleaner distributors.
2.It is recommended to clean the dust cup after
each use; When the dust cup is full or the HEPA
filter is clogged, it needs to be cleaned and
replaced if necessary.
3.Electric floor head brushroll might be entangled
with hair after long time use. It needs to be cleaned
in time to keep the vacuum working moreefficiently.
Clean dust cup and filtration system
When dust cup is full or HEPA is clogged, LED
screen will display HEPA icon as the picture to
remind to clean dust cup and lter. Please clean
dust cup and HEPA ler in time. Replace HEPA
lter if necessary.
Steps of cleaning dust cup and ltration system:
1.Press down the dust cup bottom cover, open
dust cup and dump dust into trash can.
2. Hold HEPA lid and rotate anti-clockwise,
remove HEPA assembly from handheld
vacuum for cleaning.
3. Hold top of cyclone assembly and rotate
anti-clockwise, remove cyclone assembly from
handheld vacuum for cleaning.
4. If HEPA needs wash, hold the HEPA and
rotate clockwise, remove it from HEPA lid for
washing. HEPA needs completely dry before
11
12
13
14
Eco
min
① ②
Inhaltsverzeichnis
Sprachen:
Andere Jimmy Staubsauger Handbücher
Jimmy
Jimmy BX7 Pro Bedienungsanleitung
Jimmy
Jimmy BX6 Pro Bedienungsanleitung
Jimmy
Jimmy JV51 Bedienungsanleitung
Jimmy
Jimmy BX5 Pro Bedienungsanleitung
Jimmy
Jimmy JV53 Bedienungsanleitung
Jimmy
Jimmy JV12 Bedienungsanleitung
Jimmy
Jimmy JV85 Pro Bedienungsanleitung
Jimmy
Jimmy JV63 Bedienungsanleitung
Jimmy
Jimmy H8 Pro Bedienungsanleitung
Jimmy
Jimmy HW9 Pro Bedienungsanleitung
Jimmy
Jimmy VW302 Bedienungsanleitung
Jimmy
Jimmy SF8 Bedienungsanleitung
Jimmy
Jimmy BX6 Pro Bedienungsanleitung
Jimmy
Jimmy BX6 Bedienungsanleitung
Jimmy
Jimmy BD7 Pro Bedienungsanleitung
Jimmy
Jimmy B6 Pro Bedienungsanleitung
Jimmy
Jimmy HW9 Bedienungsanleitung
Jimmy
Jimmy HW10 Bedienungsanleitung
Jimmy
Jimmy BX7 Bedienungsanleitung
Jimmy
Jimmy JV63 Bedienungsanleitung
Beliebte Staubsauger Handbücher anderer Marken
Bissell
Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung
Panasonic
Panasonic MC-YL637S147-AE Bedienungsanleitung
NEFF
NEFF N17XH10 0 Series Bedienungsanleitung
LG
LG A9 Series Bedienungsanleitung
Oreck
Oreck Cordless Captura BK51700 Series Bedienungsanleitung
Kogan
Kogan KAVACROBVWA Bedienungsanleitung
