Johnson Controls FC-2000 Bedienungsanleitung

FC-2000 Technical Manual 406

Installation Section

Technical Bulletin

Issue Date 0794

Order No. 406-020

Introduction Page 3

●

Description 3

●

Key Features 4

●

Minimum System Configurations 4

●

NFPA Standards 5

●

UL Documents 6

●

Other Standards and Documents 6

Installation 9

●

Installation Outline 10

●

Cabinet Installation 12

●

Trim Ring for CAB-x3 Enclosures 15

●

CAB-x3 Door Assembly 16

●

Installing the CHS-4 Chassis 19

●

Installing the AVPS-24 21

●

Mounting the Main Power Supply in the Cabinet 22

●

Mounting the ARM-4 Auxiliary Relay Module 23

●

Mounting Optional Module Expanders 26

●

Mounting Modules in the Chassis 27

●

Mounting the CPU-2000 28

●

Connecting Row Ribbon Cables to Modules 29

Field Wiring the Modules 31

●

Field Wiring the CPU-2000 32

●

Dummy-Loading Unused CPU-2000 Circuits 33

●

Connecting the RS-485 Interface 34

●

Typical NFPA Style B Initiating Device Circuit 35

Installing the FC-2000

All manuals and user guides at all-guides.com

2 Installation—Installing the FC-2000

●

Typical NFPA Style D Initiating Device Circuit

Page

●

Typical NFPA Style Y and Z Indicating Appliance Circuit 39

●

Field Wiring of the Control Relay Module (CRM-4) and Control Relay

Expander (CRE-4) 40

Power Supplies 41

●

MPS-24A Main Power Supply 41

●

Installing an Optional Main Power Meter 45

●

MPS-24B Main Power Supply 47

Applications 53

●

Waterflow Alarm 53

●

Supervisory Service 53

●

Central Station 54

●

Proprietary Protective Signaling 54

●

Transmitters 54

●

Digital Communicators 55

●

Tee-Tapping 58

●

4-Wire Smoke Detectors 59

●

Indicating Appliance Circuit Current Limitations 60

●

Remote Command Inputs 63

●

Remote Presignal Inhibit, All Call (General Alarm), Emergency Alert, Acknowledge,

Signal Silence, and System Reset Switches 65

●

Telephone Paging 68

Testing the System 71

●

Acceptance Test 71

●

Periodic Testing and Service 71

●

Operational Checks 71

●

Battery Checks and Maintenance 73

Calculating Power Supply Requirements 75

●

AC Branch Circuit 75

●

Main Power Supply 75

All manuals and user guides at all-guides.com

Installation—Installing the FC-2000 3

Introduction

The FC-2000 is an expandable multi-zone Fire Alarm Control Panel

designed with maximum flexibility and modularity as a basic requirement.

The heart of the system is the Central Processor Unit (CPU-2000) module,

which monitors and directs the actions of all other modules in the system.

Fifteen other modules may be installed in various configurations. Internal

communications are accomplished over a high-speed serial bus.

The CPU-2000 is provided with the Basic Equipment package. This

module provides two Style Z and/or Style Y indicating appliance circuits,

Form-C alarm and trouble contacts, remote station alarm and trouble

outputs, and a municipal central box output.

A Main Power Supply (MPS-24A or MPS-24B) and an Indicating Zone

Module (IZM-8) must be added to make the basic system functional.

The basic system can be expanded using one or more of the following

optional modules or boards:

●IZM-8 Initiating Zone Module

●IZE-A Initiating Zone Expander

●ICM-4 Indicating Circuit Module

●ICE-4 Indicating Circuit Expander

●AVPS-24 Audio Visual Power Supply

●CRM-4 Control Relay Module

●CRE-4 Control Relay Expander

●ARM-4 Auxiliary Relay Module

●VCM-4 Voice Control Module

●VCE-4 Voice Control Expander

●DCM-2 Dual Channel Module

●TCM-2 Time Control Module

●TCM-4 Time Control Module

●AIM-200 Addressable Intelligent Module

●FFT-7 Fire Fighter’s Telephone

●AMG-1 Audio Message Generator

Description

All manuals and user guides at all-guides.com

4 Installation—Installing the FC-2000

System expansion must comply with the:

●physical limitations of the cabinet configuration

●electrical limitations of the system power supply

●capacity of the secondary power source (standby batteries)

See this section for a description of the various optional modules, and the

Installation section of this document for installation information.

The FC-2000 has the following important features:

●Distributed microprocessor electronics using latest technology

●Field programmable in minutes using front panel touch switches

●Large system capacity, conventional or addressable/intelligent devices

●Voice alarm options with solid state messages

●Extensive line of serial annunciators

●Manual On/Off/Disable control for all indicating appliance circuits

and control relays

●Plug-in terminal blocks for ease of field wiring

●Walk test any portion of system while remainder provides fire

protection

●Liquid crystal display and printer options

The following FC-2000 components are required for compliance with

NFPA standards 71 and 72:

1. BE-2000 Basic Equipment Package, which includes:

CPU-2000 Central Processor Module, VP-1 Vented Dress Panel,

BP-3 Battery Dress Panel, CHS-4 Chassis, interconnecting cables,

and instruction manuals

2. An IZM-8 Initiating Zone Module for up to eight Style B initiating

device circuits or an AIM-200 Addressable Intelligent Module for up

198 addressable devices

3. Main Power Supply (MPS-24A or MPS-24B)

4. Standby Batteries--Refer to the Calculating Power Supply

Requirements section of this document.

5. Cabinet (CAB-A3, B3, C3 or D3)

Key Features

Minimum

System

Configurations

All manuals and user guides at all-guides.com

Installation—Installing the FC-2000 5

In addition, the following equipment is required for the specific NFPA

standards listed below:

An NFPA-72 Remote Station Protected Premises Control Unit requires:

6. Sprinkler Supervisory service requires a CRM-4 Control Relay

Module and a cable assembly (Part No. 71270). Refer to the

Applications section of this document.

An NFPA-72 Proprietary Protected Premises Control Unit requires:

6. NIB-96 Network Interface Board. Refer to the Applications section of

this document. Not for sprinkler supervisory service.

An NFPA-71 Central Station Protected Premises Control Unit requires:

6. 911A Digital Alarm Communicator. Refer to the Applications section

of this document.

7. Sprinkler Supervisory and/or Waterflow Alarm service requires a

CRM-4 Control Relay Module. Refer to the Applications section of

this document.

An NFPA-72 Emergency Voice/Alarm Communication System requires:

6. VTCC-1, VCC-2 or VTCC-2 Voice/Telephone Command Center for

a voice evacuation system

7. AA-120 Audio Amplifier

8VCM-4 Voice Control Module for up to four speaker or telephone

circuits or DCM-4 Dual Channel Module

Before proceeding, the installer should be familiar with the following

standards (as appropriate):

●NFPA 71 Installation, Maintenance, and Use of Central Station

Signaling Systems

●NFPA 72 Installation, Maintenance, and Use of Local, Auxiliary,

Remote Station, and Proprietary Protective Signaling Systems

●NFPA 72 Emergency Voice Alarm Service

●NFPA 72 Automatic Fire Detectors

●NFPA 72 Installation, Maintenance, and Use of Indicating Appliances

for Protective Signaling Systems

●NFPA 72 Testing Procedures for Signaling Systems

NFPA

Standards

All manuals and user guides at all-guides.com

6 Installation—Installing the FC-2000

Before proceeding, the installer should be familiar with the following

documents (as appropriate):

●UL 38 Manually Actuated Signaling Boxes

●UL 217 Smoke Detectors, Single and Multiple Station

●UL 228 Door Closers--Holders for Fire Protective Signaling Systems

●UL 268 Smoke Detectors for Fire Protective Signaling Systems

●UL 268A Smoke Detectors for Duct Applications

●UL 346 Waterflow Indicators for Fire Protective Signaling Systems

●UL 464 Audible Signaling Appliances

●UL 521 Heat Detectors for Fire Protective Signaling Systems

●UL 864 Standard for Control Units for Fire Protective Signaling

Systems

●UL 1481 Power Supplies for Fire Protective Signaling Systems

●UL 1638 Visual Signaling Appliances

●RS-232D Serial Interface Standards

●RS-485 Serial Interface Standards

●NEC Article 300 Wiring Methods

●NEC Article 760 Fire Protective Signaling Systems

In addition, you must adhere to the standards of the applicable local and

state building codes and requirements of the local Authority Having

Jurisdiction (AHJ).

UL Documents

Other

Standards and

Documents

All manuals and user guides at all-guides.com

Installation—Installing the FC-2000 7

Figure 1: Physical Configuration Options

Note: The ARM-4 must be mounted under or in a position adjacent to its

associated CRM-4 or CRE-4.

ARM-4 ARM-4

DCM-4

ARM-4

IZE-A

IZM-8

Permissible Position Sharing Combinations

ARM-4

ICM-4

TCM-2

TCM-4

VCM-4

ARM-4

CRE-4

CRM-4

AVPS-24

AVPS-24 or

AVPS-24

configop

CPU-2000

VCE-4, CRE-4 or ICE-A

All manuals and user guides at all-guides.com

8 Installation—Installing the FC-2000

All manuals and user guides at all-guides.com

Installation—Installing the FC-2000 9

Installation

Modules in the system communicate with the CPU through a common

ribbon cable connection.

aim200up

Figure 2: Module Connection Example

All manuals and user guides at all-guides.com

10 Installation—Installing the FC-2000

The following procedure outlines the installation and field wiring of the

FC-2000’s modules and refers to illustrations in the Installation, Field

Wiring the Modules, and Power Supplies sections of this document. This

procedure, and its diagrams and instructions, must be followed closely to

avoid damage to the control panel and its associated equipment. To a

great extent, reliability depends upon proper installation and maintenance.

1. Cabinet--Mount the cabinet and draw all field wiring through the

knockouts provided (Figure 3). Ensure that the cabinet is properly

grounded to earth.

Note: If the door is to be hung on the left side, mount door hardware

now. The MPS-24A/MPS-24B rests on the lower door mount.

Do not draw wiring into the bottom nine inches of the cabinet,

or conflict with the power supply and batteries may result.

2. Chassis--Mount all chassis. Refer to Figures 12 and 13 for

installation of the CHS-4 and CHS-4L chassis.

3. Main Power Supply--Mount the main power supply to the cabinet as

illustrated in Figure 15. Do not wire anything at this time!

4. Audio Visual Supplies--If any optional Audio Visual Power Supplies

(AVPS-24) are to be employed, mount them to the chassis. Refer to

Figure 14 for mounting of the AVPS-24 to the CHS-4.

5. Audio Visual Cables--Connect the AVPS trouble cable(s). Connect

the auxiliary bell power harness to the AVPS-24. Refer to Figure 36

to connect these cables.

6. Auxiliary Relay Modules--If any optional Auxiliary Relay Modules

(ARM-4) are to be employed, mount them to the chassis as illustrated

in Figure 16.

7. Preliminary System Wiring--The main power supply and any

AVPS-24s or ARM-4s should be wired at this time while the

terminals are readily accessible. Refer to the Power Supplies section

of this document to wire the MPS-24A/B, the AVPS-24s (see

Figure 36) and any ARM-4s (see Figure 22).

8. Module Ribbon Cables--Connect the first row ribbon cable to the

CPU as illustrated in Figure 17. For each additional row of modules

installed in the cabinet, connect an expander row ribbon cable to the

CPU.

9. CPU-2000--Install the CPU module in the top left cabinet position as

illustrated in Figure 20. Connect the power ribbon and power harness

between the CPU and the main power supply as illustrated in

Figures 32 and 35.

10. Module Expander Boards--If optional expanders are to be used with

a module, install as illustrated in Figure 18.

Installation

Outline

All manuals and user guides at all-guides.com

Andere Handbücher für FC-2000

Inhaltsverzeichnis

Andere Johnson Controls Bedienfeld Handbücher

Johnson Controls

Johnson Controls IFC-200 Bedienungsanleitung

Johnson Controls

Johnson Controls Frick QUANTUM LX Bedienungsanleitung

Johnson Controls

Johnson Controls Bentel Security Absoluta 630 4.10 Benutzerhandbuch

Johnson Controls

Johnson Controls IQ Panel Bedienungsanleitung

Johnson Controls

Johnson Controls Tyco PowerSeries Pro HS2TCHPRO Bedienungsanleitung

Johnson Controls

Johnson Controls Frick QUANTUM LX Bedienungsanleitung

Johnson Controls

Johnson Controls FRICK QUANTUM LX AcuAir Gebrauchs- und Pflegehandbuch

Johnson Controls

Johnson Controls IFC-200 Bedienungsanleitung

Johnson Controls

Johnson Controls Frick QUANTUM LX Leitfaden

Johnson Controls

Johnson Controls Qolsys IQPK048 Bedienungsanleitung

Johnson Controls

Johnson Controls Bentel Security tyco ABSOLUTA Plus Benutzerhandbuch

Johnson Controls

Johnson Controls S1-TTSCC01 Kurzanleitung

Johnson Controls

Johnson Controls IFC-3030 Bedienungsanleitung

Johnson Controls

Johnson Controls YORK OPTIVIEW CONTROL CENTER Bedienungsanleitung

Johnson Controls

Johnson Controls IFC-3030 Bedienungsanleitung

Johnson Controls

Johnson Controls FRICK QUANTUM HD Handbuch

Johnson Controls

Johnson Controls IQ4 NS Bedienungsanleitung

Johnson Controls

Johnson Controls S1-TTSCC01 Leitfaden

Johnson Controls

Johnson Controls Frick QUANTUM Series Leitfaden

Johnson Controls

Johnson Controls IFC-200 Referenzhandbuch

Johnson Controls

Johnson Controls FRICK QUANTUM LX/HD Bedienungsanleitung

Johnson Controls

Johnson Controls FC-2000 Bedienungsanleitung

Johnson Controls

Johnson Controls CIW01 Bedienungsanleitung

Johnson Controls

Johnson Controls FRICK QUANTUM LX AcuAir Leitfaden

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten