Juniper T1600 Bedienungsanleitung

Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet

To prepare to install the router into a four-post rack or cabinet:

■Install cage nuts, if needed.

■Install the large mounting shelf and the spacer bars on the front rack rail.

■Install the small mounting shelf on the rear rack rail.

■Remove the center-mounting brackets from the chassis.

The mounting brackets and flanges have holes for rack-mounting screws, spaced at

5.25 in. (13.34 cm).

Table 1 specifies the holes in which you insert mounting screws (an Xindicates a

mounting hole location), and cage nuts if needed. The hole distances are relative to

one of the standard “U”divisions on the rack. The bottom of all mounting shelves

is at 0.04 in. (0.02 U) above a “U”division.

Table 1: Four-Post or Cabinet Rack Mounting Hole Locations

Small

Shelf

Spacer

Bars

Large

ShelfDistance Above “U”DivisionHole

19.86 U34.75 in. (88.3 cm)60

16.86 U29.51 in. (74.9 cm)51

13.86 U24.26 in. (61.6 cm)42

10.86 U19.01 in. (48.3 cm)33

7.86 U13.76 in. (34.9 cm)24

4.86 U8.51 in. (21.6 cm)15

3.86 U6.76 in. (17.1 cm)12

2.86 U5.01 in. (12.7 cm)9

1.86 U3.26 in. (8.3 cm)6

0.86 U1.51 in. (3.8 cm)3

0.50 U0.88 in. (2.2 cm)2

Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet ■1

To install the mounting shelves and spacer bars:

1. Install cage nuts, if needed, in the mounting holes specified in Table 1:

■On the front rack rails, install cage nuts in the holes specified for the large

shelf and the spacer bars.

■On the rear rack rails, install cage nuts in the holes specified for the small

shelf.

2. On the front of each front rack rail, partially insert a mounting screw into the

lowest hole specified in Table 1 for the large shelf and the spacer bars.

3. Install the large shelf on the front rack rails. Rest the bottom slot of each flange

on a mounting screw.

4. Partially insert a mounting screw into the top hole in each flange of the large

shelf.

5. Tighten all the screws completely.

6. The router is shipped with each spacer bar attached to the rear of each

front-mounting flange. Remove each spacer bar by removing the screws that

fasten the spacer bar to the front-mounting flange.

7. Place one of the spacer bars over a flange of the large shelf. Position the notch

in the rear of the spacer bar so the upper part of the bar is flush with the rack

rail and the lower part is flush with the flange of the shelf (see Figure 1).

8. Insert a mounting screw into each of the nonthreaded holes in the recesses of

the spacer bar to secure the spacer bar. Each hole should have a cage nut behind

it.

9. Repeat Steps 7 and 8 for the other spacer bar.

10. Tighten all the screws completely.

11. On the back of each rear rack rail, partially insert a mounting screw into the

lowest hole specified in Table 1 for the small shelf.

12. Install the small shelf on the back rack rails. Rest the bottom slot of each flange

on a mounting screw. The small shelf installs on the back of the rear rails,

extending toward the center of the rack. The bottom of the small shelf on the

rear rack rails must align with the bottom of the large shelf on the front rack

rails.

13. Partially insert screws into the open holes in the flanges of the small shelf.

14. Tighten all the screws completely.

15. Remove the mounting brackets from the chassis by loosening the screws at the

top and bottom of each bracket.

2■Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet

Figure 1: Positioning the Spacer Bar on the Rack

Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet ■3

Figure 2: Installing the Mounting Hardware for a Four-Post Rack or Cabinet

Related Topics T1600 Router Description■

■T1600 Router Installation Summary

■T1600 Site Preparation Requirements Checklist

Published: 2009-09-30

4■Installing the T1600 Mounting Hardware for a Four-Post Rack or Cabinet

Andere Handbücher für T1600

Inhaltsverzeichnis

Andere Juniper Netzwerk-Hardware Handbücher

Juniper

Juniper EX4100-F- 24P/T Bedienungsanleitung

Juniper

Juniper CTP150 Bedienungsanleitung

Juniper

Juniper Junos Space JA1500 Bedienungsanleitung

Juniper

Juniper SRX320 Bedienungsanleitung

Juniper

Juniper NFX150-S1 Bedienungsanleitung

Juniper

Juniper SRX300 Series Bedienungsanleitung

Juniper

Juniper EX4100-48P/T Bedienungsanleitung

Juniper

Juniper SRX3400 Bedienungsanleitung

Juniper

Juniper SRX5400 Service-Handbuch

Juniper

Juniper SSR120 Montageanleitung

Juniper

Juniper Day One+ QFX5700 Bedienungsanleitung

Juniper

Juniper SRX Series Bedienungsanleitung

Juniper

Juniper JSA7800 Bedienungsanleitung

Juniper

Juniper SRX340 Montageanleitung

Juniper

Juniper JCS1200 Bedienungsanleitung

Juniper

Juniper NFX150 Montageanleitung

Juniper

Juniper MX480 Montageanleitung

Juniper

Juniper JRR200 Montageanleitung

Juniper

Juniper CSE2000 Handbuch

Juniper

Juniper SSR1400 Montageanleitung

Juniper

Juniper Day One+ ACX7100-48L Bedienungsanleitung

Juniper

Juniper Junos OS Bedienungsanleitung

Juniper

Juniper NETSCREEN-5XP Bedienungsanleitung

Juniper

Juniper NFX250 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung