JVC KD-G384 Bedienungsanleitung

For canceling the display demonstration, see page 6.

For installation and connections, refer to the separate manual.

INSTRUCTIONS

GET0445-001A

[UI]

CD RECEIVER KD-G384

Cover_KD-G384[UI]f.indd 1Cover_KD-G384[UI]f.indd 1 10/3/06 6:09:00 PM10/3/06 6:09:00 PM

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLA 1 LA ER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to

qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical

instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUT IDE THE UNIT.

How to reset your unit

• Your preset adjustments will also be erased.

How to forcib y eject a disc

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

Warning:

If you need to operate the unit while driving, be

sure to look ahead carefully or you may be involved

in a traffic accident.

Caution on vo ume setting:

Discs produce very little noise compared with other

sources. Lower the volume before playing a disc

to avoid damaging the speakers by the sudden

increase of the output level.

[European Union only]

EN02-07_KD-G384[UI]f.indd 2EN02-07_KD-G384[UI]f.indd 2 10/3/06 6:08:19 PM10/3/06 6:08:19 PM

How to use the M MODE button

If you press M MODE, the unit goes into functions mode,

then the number buttons and 5/∞ buttons work as

different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

To use these buttons for their origina functions

again after pressing M MODE, wait for 5 seconds

without pressing any of these buttons until the

functions mode is cleared or press M MODE again.

Detaching the contro pane

Attaching the contro pane

CONTENTS

Contro pane .................................. 4

Remote contro er — RM-RK50 ........... 5

Getting started ................................ 6

Basic operations ................................................... 6

Radio operations ............................. 7

Disc operations ................................ 8

Playing a disc in the unit ..................................... 8

Sound adjustments .......................... 10

Externa component operations ....... 11

Genera settings — PSM .................. 11

Maintenance ................................... 13

More about this unit ........................ 14

Troub eshooting .............................. 16

Specifications .................................. 17

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• top the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold

weather, wait until the temperature in the car becomes

normal before operating the unit.

EN02-07_KD-G384[UI]f.indd 3EN02-07_KD-G384[UI]f.indd 3 10/3/06 6:08:22 PM10/3/06 6:08:22 PM

o RND (random) button

; M MODE button

a (control panel release) button

s Disc information indicators—

TAG (Tag information), (track/file), (folder)

d DI C indicator

f Playback mode / item indicators—RND (random),

(disc), (folder), RPT (repeat)

g Tuner reception indicators—MO (monaural),

T (stereo)

h .BA (super bass) indicator

j EQ (equalizer) indicator

k Tr (track) indicator

l ource display / Volume level indicator / Time

countdown indicator

/ Main display

z ound mode (iEQ: intelligent equalizer)

indicators—JAZZ, ROCK, HIP HOP, CLA IC, POP ,

U ER

Parts identification

Disp ay window

Control panel

1 Control dial

2 0 (eject) button

3 Loading slot

4 EQ (equalizer) button

5 DI P (display) button

6 4 / ¢ buttons

7 Display window

8 (standby/on attenuator) button

9 AUX (auxiliary) input jack

p 5 (up) / ∞ (down) buttons

q EL (select) button

w BAND button

e RC (source) button

r Remote sensor

DO NOT e pose the remote sensor to strong light

(direct sunlight or artificial lighting).

t MO (monaural) button

y M ( trong-station equential Memory) button

u Number buttons

i RPT (repeat) button

EN02-07_KD-G384[UI]f.indd 4EN02-07_KD-G384[UI]f.indd 4 10/3/06 6:08:22 PM10/3/06 6:08:22 PM

Remote controller — RM-RK50

Insta ing the ithium coin battery

(CR2025)

Aim the remote contro er direct y at the remote

sensor on the unit. Make sure there is no obstac e

in between.

Warning:

• Do not install any battery other than CR2025 or

its equivalent; otherwise, it may explode.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct sunlight

for a long time; otherwise, it may explode.

• tore the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

– Do not leave the battery with other metallic

materials.

– Do not poke the battery with tweezers or similar

tools.

– Wrap the battery with tape and insulate when

throwing away or saving it.

Main e ements and features

1 (standby/on/attenuator) button

• Turns the power on if pressed briefly or

attenuates the sound when the power is on.

• Turns the power off if pressed and held.

2 5 U (up) / D (down) ∞ buttons

• Changes the FM/AM bands with 5 U.

• Changes the preset stations with D ∞.

• Changes the folder of the MP3/WMA discs.

3 VOL – / VOL + buttons

• Adjusts the volume level.

4 OUND button

• elects the sound mode (iEQ: intelligent

equalizer).

5 OURCE button

• elects the source.

6 2 R (reverse) / F (forward) 3 buttons

• earches for stations if pressed briefly.

• Fast-forwards or reverses the track if pressed and

held.

• Changes the tracks if pressed briefly.

EN02-07_KD-G384[UI]f.indd 5EN02-07_KD-G384[UI]f.indd 5 10/3/06 6:08:22 PM10/3/06 6:08:22 PM

Basic settings

• ee also “General settings — P M” on pages 11 and

12.

1 Cance ing the disp ay demonstrations

elect “DEMO,” then “DEMO OFF.”

2 Setting the c ock

elect “CLOCK H” (hour), then adjust the hour.

elect “CLOCK M” (minute), then adjust the

minute.

3 Finish the procedure.

To check the current c ock time whi e the

power is turned off

Clock time is shown on the

display for about 5 seconds. ee

also page 12.

Getting started

Basic operations

Turn on the power.

* You cannot select “CD” as the playback source if

there is no disc in the unit.

! For FM/AM tuner

⁄ Adjust the vo ume.

@ Adjust the sound as you want. (See

page 10.)

To drop the vo ume in a

moment (ATT)

To restore the sound, press the

button again.

To turn off the power

Volume level appears.

EN02-07_KD-G384[UI]f.indd 6EN02-07_KD-G384[UI]f.indd 6 10/3/06 6:08:23 PM10/3/06 6:08:23 PM

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting —

SSM (Strong-station Sequentia

Memory)

1 Se ect the FM band (FM1 – FM3) you want to

store into.

“ M” flashes, then disappears when automatic

presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM band.

Manua presetting

Ex.: toring FM station of 92.5 MHz into preset number

4 of the FM1 band.

Radio operations

! Start searching for a station.

When a station is received,

searching stops.

To stop searching, press the

same button again.

To tune in to a station manua y

In step ! above...

2 Se ect a desired station frequency.

When an FM stereo broadcast is hard to

receive

Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same

procedure. “MONO OFF” appears and the MO indicator

goes off.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Lights up when monaural mode is activated.

Preset number flashes for a while.

EN02-07_KD-G384[UI]f.indd 7EN02-07_KD-G384[UI]f.indd 7 10/3/06 6:08:23 PM10/3/06 6:08:23 PM

To fast-forward or reverse the track

To go to the next or previous tracks

To go to the next or previous folders (only for

MP3 or WMA discs)

To locate a particular track (for D) or folder

(for MP3 or WMA discs) directly

To select a number from 01 – 06:

To select a number from 07 – 12:

• To use direct folder access on MP3/WMA discs it

is required that folders are assigned with 2-digit

numbers at the beginning of their folder names—

01 02 03 and so on.

To select a particular track in a

folder (for MP3 or WMA disc):

Listening to a preset station

2 Select the preset station (1 – 6) you want.

To check the other information while

listening to an FM or AM station

Disc operations

Playing a disc in the unit

~ Turn on the power.

All tracks will be played repeatedly until you

change the source or eject the disc.

To stop play and eject the disc

• Press SRC to listen to another

playback source.

lock Ô Frequency

EN08-13_KD-G384[UI]f.indd 8EN08-13_KD-G384[UI]f.indd 8 10/3/06 6:08:34 PM10/3/06 6:08:34 PM

Other main functions

Skipping tracks quickly during play

• For MP3 or WMA discs you can skip tracks within the

same folder.

Ex.: To select track 32 while playing tracks whose

number is a single digit (1 to 9)

Each time you press the button you can skip 10

tracks.

• After the last track the first track will be selected

and vice versa.

Prohibiting disc ejection

You can lock a disc in the loading slot.

To cancel the prohibition, repeat the same

procedure.

hanging the display information

While playing an audio D or a

D Text

While playing an MP3 or a WMA disc

• When “TAG DISP” is set to “TAG ON”

(see page 12)

• When “TAG DISP” is set to “TAG OFF”

: lock with the current track number

: Elapsed playing time with the current

track number

: orresponding indicator lights up on the

display

*1 If the current disc is an audio CD, “NO NAME” appears.

*2 If an MP3/WMA fi e does not have Tag information,

fo der name and fi e name appear. In this case, the

TAG indicator wi not ight up.

Selecting the playback modes

You can use only one of the following playback modes

at a time.

2 Select your desired playback mode.

7 Repeat play

Mode Plays repeatedly

TRK RPT : The current track.

FLDR RPT * : All tracks of the current folder.

RPT OFF : Cancels.

Continued on the next page

EN08-13_KD-G384[UI]f.indd 9EN08-13_KD-G384[UI]f.indd 9 10/3/06 6:08:36 PM10/3/06 6:08:36 PM

7 Random play

Mode Plays at random

FLDR RND * : All tracks of the current folder

then tracks of the next folder and

so on.

DIS RND : All tracks of the current disc.

RND OFF : Cancels.

* On y whi e p aying an MP3 or a WMA disc.

: orresponding indicator lights up on

the display

Sound adjustments

You can select a preset sound mode suitable to the

music genre (iEQ: intelligent equalizer).

Indication (For)

BAS*1MID*2TRE*3S.BS*4

USER

(Flat sound) 00 00 00 OFF

RO K

(Rock or disco music) +03 00 +02 ON

LASSI

(Classical music) +01 00 +03 OFF

POPS

(Light music) +02 +01 +02 OFF

HIP HOP

(Funk or rap music) +04 –02 +01 ON

JAZZ

(Jazz music) +03 00 +03 OFF

*1 : Bass; *2 : Mid-range; *3 : Treble; *4 : Super bass

Adjusting the sound

You can adjust the sound characteristics to your

preference.

Indication, [Range]

BAS *2 (bass) [–06 to +06]

Adjust the bass.

MID *2 (mid-range) [–06 to +06]

Adjust the mid-range frequencies sound level.

TRE *2 (treble) [–06 to +06]

Adjust the treble.

FAD *3 (fader) [R06 to F06]

Adjust the front and rear speaker balance.

BAL *4 (balance) [L06 to R06]

Adjust the left and right speaker balance.

S.BS *2 (super bass) [S.BS ON or S.BS OFF] [01 to 05]*5

Maintain the richness and fullness of the bass sound

regardless of how low you set the volume.

SUB.W (subwoofer) [00 to 08]

Adjust the subwoofer output level.

VOL (volume) [00 to 30 or 50 *6]

Adjust the volume.

*1 Disp ayed on y when “L/O MODE” is set to “WOOFER”

(see page 12).

*2 When you adjust the bass, mid-range, treb e, or super

bass, the adjustment you have made is stored for the

current y se ected sound mode (iEQ) inc uding “USER.”

*3 If you are using a two-speaker system, set the fader

eve to “00.”

*4 The adjustment cannot affect the subwoofer output.

*5 Range adjustment for super bass is adjustab e on y

when it is set to “S.BS ON.”

*6 Depending on the amp ifier gain contro setting. (See

page 12 for detai s.)

Preset values

EN08-13_KD-G384[UI]f.indd 10EN08-13_KD-G384[UI]f.indd 10 10/3/06 6:08:37 PM10/3/06 6:08:37 PM

Andere Handbücher für KD-G384

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung