JVC KD-G814 Bedienungsanleitung

CD RECEIVER

For canceling the display demonstration, see page 8.

For installation and connections, refer to the separate manual.

INSTRUCTIONS

GET0306-001A

[UI]

KD-G814

Cover_KD-G814[UI]f.indd 2Cover_KD-G814[UI]f.indd 2 1/26/05 3:58:04 PM1/26/05 3:58:04 PM

How to reset your unit

This will reset the microcomputer. Your

preset adjustments will also be erased.

How to forcibly eject a disc

If a disc cannot be recognized by the

receiver or cannot be ejected, eject the disc

as follows.

If this does not work, reset your receiver.

Warning:

If you need to operate the receiver while

driving, be sure to look ahead carefully or

you may be involved in a traffic accident.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

EN02-05_KD-G814[UI]f.indd 2EN02-05_KD-G814[UI]f.indd 2 1/26/05 3:58:18 PM1/26/05 3:58:18 PM

How to reset your unit ........................... 2

How to forcibly eject a disc................... 2

How to read this manual........................ 4

How to use the MODE button ............... 4

Control panel — KD-G814 ......... 5

Parts identification................................. 5

Remote controller — RM-RK50

... 6

Main elements and features ................... 6

Getting started....................... 7

Basic operations.................................. 7

Canceling the display demonstrations ... 8

Setting the clock .................................... 8

Radio operations ................... 9

Listening to the radio........................... 9

Storing stations in memory.................... 10

Listening to a preset station ................... 10

Disc operations ...................... 11

Playing a disc in the receiver ............... 11

Playing discs in the CD changer ........... 12

Other main functions ............................. 14

Changing the display information ......... 15

Selecting the playback modes................ 16

Sound adjustments ................ 17

Selecting preset sound modes

(iEQ: intelligent equalizer) ................ 17

Adjusting the sound ............................... 18

Storing your own sound adjustments..... 19

General settings — PSM .........20

Basic procedure ..................................... 20

Other main functions ............. 22

Assigning titles to the sources ............... 22

Changing the control panel angle .......... 23

Detaching the control panel................... 23

External component operations

... 24

Playing an external component ............ 24

Maintenance .......................... 25

More about this receiver ........ 26

Troubleshooting ..................... 28

Specifications ......................... 31

*Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

Contents

*For safety....

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

EN02-05_KD-G814[UI]f.indd 3EN02-05_KD-G814[UI]f.indd 3 1/26/05 3:58:21 PM1/26/05 3:58:21 PM

How to read this manual

The following methods are used to made the

explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this receiver” (see pages 26 and

27).

• Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

How to use the MODE button

If you press MODE, the receiver goes into

functions mode, then the number buttons and

5/∞buttons work as different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

Time countdown indicator

To use these buttons for original functions

again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared.

• Pressing MODE again also clears the

functions mode.

EN02-05_KD-G814[UI]f.indd 4EN02-05_KD-G814[UI]f.indd 4 1/26/05 3:58:21 PM1/26/05 3:58:21 PM

Control panel — KD-G814

1(standby/on attenuator) button

2DISP (display) button

3SEL (select) button

4Control dial

5Display window

6(angle) button

70(eject) button

85(up) button / +10 button

∞(down) button / –10 button

9MODE button

pRemote sensor

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

qSOURCE button

wBAND button

eReset button

rEQ (equalizer) button

tMO (monaural) button

ySSM (Strong-station Sequential Memory)

button

uINT (intro) button

iRPT (repeat) button

oRND (random) button

;Number buttons

a4/ ¢buttons

s(control panel release) button

Display window

dDisc information indicators—TAG (ID3

Tag), (track/file), (folder)

fMP3 indicator

gCH (CD changer) indicator

• Lights up only when CD-CH is selected

for the playback source.

hCD indicator

jWMA indicator

kMain display

lEqualizer pattern indicator

Audio level indicator

/EQ (equalizer) indicator

zBand indicators—FM1, FM2, FM3, AM

xTuner reception indicators—ST (stereo),

MO (monaural)

cPlayback mode / item indicators—

(folder), (disc), RND (random),

INT (intro), RPT (repeat)

vTRACK indicator

bSource / clock display

nLOUD (loudness) indicator

mAudio / volume level indicator

Parts identification

Display window

EN02-05_KD-G814[UI]f.indd 5EN02-05_KD-G814[UI]f.indd 5 1/27/05 11:36:46 AM1/27/05 11:36:46 AM

Remote controller — RM-RK50

Main elements and features

1(standby/on/attenuator) button

• Turns on and off the power and also

attenuates the sound.

25U (up) / D (down) ∞buttons

• 5U: Changes the FM/AM bands.

• D ∞: Changes the preset stations.

• Changes the folder of the MP3/WMA

discs.

• While playing an MP3 disc on an

MP3-compatible CD changer:

– Changes the disc if pressed briefly.

– Changes the folder if pressed and held.

3VOL – / VOL + buttons

• Adjusts the volume level.

4SOUND button

• Selects the sound mode (iEQ: intelligent

equalizer).

5SOURCE button

• Selects the source.

62R (reverse) / F (forward) 3buttons

• Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if

pressed and held.

• Changes the tracks of the disc.

Installing the lithium coin battery

(CR2025)

• When operating, aim the remote controller

directly at the remote sensor on the

receiver. Make sure there is no obstacle in

between.

Warning:

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble, or

heat the battery or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

Caution:

EN06-11_KD-G814[UI]f.indd 6EN06-11_KD-G814[UI]f.indd 6 1/26/05 3:58:37 PM1/26/05 3:58:37 PM

You cannot select some sources if they

are not ready.

!For FM/AM tuner only

⁄Adjust the volume.

Volume level appears.

Volume level indicator

@Adjust the sound as you want.

(See pages 17 – 19.)

To drop the volume in a moment (ATT)

To restore the sound,

press it again.

To turn off the power

Getting started

Basic operations

EN06-11_KD-G814[UI]f.indd 7EN06-11_KD-G814[UI]f.indd 7 1/26/05 3:58:39 PM1/26/05 3:58:39 PM

Canceling the display

demonstrations

If no operations are done for about 20 seconds,

display demonstration starts.

[Initial: DEMO ON]—see page 20.

4Finish the procedure.

To activate the display demonstration

In step 3above...

Setting the clock

2Set the hour and minute.

1Select “CLOCK HOUR,” then

adjust the hour.

2Select “CLOCK MINUTE,” then

adjust the minute.

3Finish the procedure.

To check the current clock time when the

power is turned off

EN06-11_KD-G814[UI]f.indd 8EN06-11_KD-G814[UI]f.indd 8 1/26/05 3:58:40 PM1/26/05 3:58:40 PM

To tune in to a station manually

In step !on the left...

2Select the desired station frequencies.

When an FM stereo broadcast is hard to

receive

Lights up when monaural mode is activated.

Reception improves, but stereo effect will

be lost.

To restore the stereo effect, repeat the same

procedure so that the MO indicator goes off.

Radio operations

Listening to the radio

Selected band appears.

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

!Start searching for a station.

When a station is received, searching

stops.

To stop searching, press the same

button again.

EN06-11_KD-G814[UI]f.indd 9EN06-11_KD-G814[UI]f.indd 9 1/26/05 3:58:41 PM1/26/05 3:58:41 PM

4 Preset number flashes

for a while.

Listening to a preset station

3Select the preset station (1 – 6) you

want.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting—

SSM (Strong-station Sequential

Memory)

2Select the FM band (FM1 – FM3)

you want to store into.

“SSM” appears, then disappears when

automatic presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into the

preset number 4 of the FM1 band.

EN06-11_KD-G814[UI]f.indd 10EN06-11_KD-G814[UI]f.indd 10 1/26/05 3:58:41 PM1/26/05 3:58:41 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

JVC

JVC KS-FX8R Bedienungsanleitung

JVC

JVC LVT1099-001A Bedienungsanleitung

JVC

JVC KW-R500 Bedienungsanleitung

JVC

JVC KD-G465 Bedienungsanleitung

JVC

JVC KD-G151 Bedienungsanleitung

JVC

JVC KD-G737 Bedienungsanleitung

JVC

JVC EXAD KD-LHX502 Bedienungsanleitung

JVC

JVC KD-S31J Bedienungsanleitung

JVC

JVC KD-G126 Bedienungsanleitung

JVC

JVC KD-G721 Bedienungsanleitung

JVC

JVC KD-ABT22 Bedienungsanleitung

JVC

JVC KW-R900BT Leitfaden

JVC

JVC KD-G331E Bedienungsanleitung

JVC

JVC KD-AVX2 - DVD Player With LCD Monitor Bedienungsanleitung

JVC

JVC KD-R440JW Bedienungsanleitung

JVC

JVC kd-g162 Bedienungsanleitung

JVC

JVC KD-LX30 Bedienungsanleitung

JVC

JVC KS-F184 Bedienungsanleitung

JVC

JVC KD-LX1J Leitfaden

JVC

JVC KD-MX2800R Bedienungsanleitung

JVC

JVC KW-X850BT Bedienungsanleitung

JVC

JVC KD-SH77/KD-SH55 Bedienungsanleitung

JVC

JVC KD-SX947R Bedienungsanleitung

JVC

JVC KD-X472DBT Bedienungsanleitung

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung