JVC KD-LX100 Bedienungsanleitung

CD RECEIVER KD-LX100

RECEPTOR CON CD

RECEPTEUR CD

For installation and connections, refer to the separate manual

Para la instalacibn y las conexiones, refikrase al manual separado

Pour l’installation et les raccordements, se rkfkrer au manuel sCpar6

For customer Use:

Enter below the Model No and

Serial No which are located on

the top or bottom of the cabinet

Retain this information for future

reference

Model No

Serial No

PIM163600

LJI

INFORMATION (For U S A )

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection

against harmful interference in a residential installation This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications However, there is no guarantee that

interference will not occur in a particular installation If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected

- Consult the dealer or an experienced radio/TV technician for help

IMPORTANT FOR LASERPRODUCTS

Precautions:

1 CLASS 1 LASER PRODUCT

2 DANGER: Invisible laser radiation when open and interlock failed or defeated Avoid direct

exposure to beam

3 CAUTION: Do not open the top cover There are no user-serviceable parts inside Leave all

servicing to qualified service personnel

4 CAUTION: This CD player uses invisible laser radiation, however, is equipped with safety switches

to prevent radiation emission when unloading CDs It is dangerous to defeat the safety switches

5 CAUTION: Use of controls, adjustments or performance of procedures other than those specified

herein may result in hazardous radiation exposure

Howto resetyourunit

Press the reset button on the front panel using a ball-point pen or a similar tool

This will reset the built-in microcomputer

Your preset adjustments - such as preset channels or sound adjustments - will also be erased

CAUTION on Volume Setting

CDs produce very little noise compared with other sources If the volume level is adjusted for the

tune< for example, the speakers may be damaged by the sudden increase in the output level Therefore,

lower the volume before playing a disc and adjust it as required during playback

Thank you for purchasing a JVC product Please read all instructions carefully before operation,

to ensure your complete understanding and to obtain the best possible performance from the unit

CONTENTS

17 I

LOCATIONOFTHEBUTTONS... ,..... . 4 OTHERMAIN FUNCTIONS . . .......

Control panel 4 Setting the clock

Remote controller 5 Changing the general settings (PSM)

Preparing the remote controller 6 Controlling the volume automatically

BASICOPERATIONS . .. 7

(Audio Cruise)

Assigning names to the sources

RADIO BASICOPERATIONS 8 COCHANGEROPERATIONS. .. . ..

Listening to the radio 8 Playing CDs

Storing stations in memory . 9 Selecting CD playback modes

Tuning into a preset station 10

COOPERATIONS........ . . .. . . . 11 EXTERNALCOMPONENTOPERATIONS...

Playing a CD Playing an external component

Locating a track or a particular portion

TROUBLESHOOTING ... . ... .. . . 27

onaCD

Selecting CD playback modes

Prohibiting CD ejection

Playing a CD Text

;; MAINTENANCE.. .. .. ... . .. . . 28

13 Handling CDs 28

l3 SPECIFICATIONS . . . ...... ... . 29

SOUNDADJUSTMENTS .. . .

Adjusting the sound 14

Turning on/off the BBE” function 15

Using the sound control memory 15

Storing your own sound adjustments 16

About the demonstration mode (DEMO MODE)

When shipped from the factory, “DEMO MODE” is set to “DEMO ON” in this unit The

demonstration will start automatically if no sound comes in for 3 minutes (See page 20 )

To activate the display demonstration manually

While holding DISP, press A HI until “DEMO” appears on the display

Various functions and display illumination modes equipped with this unit will be demonstrated repeatedly

in sequence During the display demonstration, “DEMO” flashes on the display

To turn off the display demonstration, press h HI again for a few seconds while holding DISP

The display demonstration will turn off automatically after about 1 hour

BEFOREUSE

*For safety

Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous

Stop the car before performing any complicated

operations

*Temperature inside the car

If you have parked the carfor a long time in hot or

cold wearhe< wait until the temperature in the car

becomes normal before operating the unit

LOCATIONOFTHE BUTTONS

ControlDane1

*The control panel slides out when you press ON/CLOSE

*When YOU press OFF& button, the display panel moves down and the CD loading slot appears

Control dial

AW/I* V button

h w / IU

also functions as ON 01

CLOSE button

Remote sensor

l2l SEL (select) button

DISP (display) button

Also functions as SSM buttons when pressed

together with the MODE button

MODE button

Also functions as SSM buttons when pressed

together with the DISP button

SCM (sound control memory) button

MONO button

LOCAL button

INT (intro) button

RPT (repeat) button

RND (random) button

fl SOURCE button

BBE button

BAND button

OFF/= (eject) button

Number buttons

How to use the number buttons.

After pressing MODE, the number buttons work as different function buttons (while “MODE” remains

on the display)

To use these buttons as number buttons after pressing MODE,

wait for 5 seconds without pressing

anv number button so that

“MbDE” disappears from the display

Pressing MODE again also

erases “MODE” from the display

Remotecontroller

Turns on the unit if pressed when the unit is

turned off

Turns off the unit if pressed and held until “SEE

YOU” appears on the display

Drops the volume level for a moment if pressed

briefly

Press again to resume the volume

Functions as the BAND button while listening

to the radio

Each time you press the button, the band

changes

Functions as the DISC + button while listening

to the CD changer

Each time you press the button, the disc

number increases, and the selected disc starts

playing

Does not function as the PROG button

* Functions as the PRESET button while

listening to the radio

Each time you press the button, the preset

station number increases, and the selected

station is tuned in

Functions as the DISC - button while listening

to the CD changer

Each time you press the button, the disc

number decreases, and the selected disc

starts playing

Functions the same as the control dial on the

main unit

NOTE:

This button does notfunction for the

preferred setting mode adjustment

0 Selects the sound mode

Each time you press SCM (Sound Control

Memory), the mode changes

Selects the source

Each time you press FUNC (function), the

source changes

Searches stations while listening to the radio

Fast-forwards or reverses the track if pressed

and held while listening to a CD

Skips to the beginning of the next track or goes

back to the beginning of the current (or

previous) track if pressed briefly while listening

toaCD

Preparingtheremotecontroller

Before using the remote controller

Aim the remote controller directly at the remote

sensor on the main unit Make sure there is no

obstacle in between

Remote sensor

Do not expose the remote sensor to strong light

(direct sunlight or artificial lighting)

lnstallina the battery

When the controllable range or effectiveness of the

remote controller decreases, replace the battery

Remove the battery holder

1) Push out the battery holder in the direction

indicated by the arrow using a ball-point pen

or a similar tool

2) Remove the battery holder

2 Place the battery

Slide the battery into the holder with the + side

facing upwards so that the battery is fixed in the

holder

(product number:

3 Return the battery holder

Insert again the battery holder pushing it until

you hear a clicking sound

WARNING

tj n child nc ciderdlv swwllows the bntte, irs,

immedintelv corlwlt u rloctol:

Do riot recharge, shot t, diwrssemble 01 hetrt the

batteries or dispose of in n fire

Doing nnv

these things ma’ cause the

bottel ies to give off heat, orrck 01 start afire

Do not leave the bottet ies with orhe/ metallic

materials

Doing this mnv cause the bnttet ies to give of

heat, track 01 stonrt afire

When throwing awny ot saving batteries. wrap

in tape and insulate, othe, wise, it rnn~ cause the

bntteries to give off heat, track or stat t afire

Do not poke the batter ies with tweezers 01

similar tools

Doing this mnv cause the batteries to give off

heat, clack or start njire

BASICOPERATIONS @

7 Turn on the power. 3 Adjust the volume.

The display illuminates and

the control panel and control

dial come out

To increase the volume

To decrease the volume

Select the source.

Each time you press the

button, the source changes

as follows

21 page 14).

-, CD changer or external component

4 Adjust the sound as you want (see

* If cl

CD is not in the loading slot, vou cannot

select CD as the source to plav

* Without connecting the equipment and setting

“EXT INPUT” corrrctlv (see page 20), vou

cannot select it as the source to plan

To operate the tuner (FM or AM),

seepages8-10

To operate the CD player,

seepagesll-13

To operate the CD changer,

seepages23-25

To operate the external component,

see page 26

Note on display illustrations

Illustrations will difSc from what appears if

“CLOCK DISP” is set to “CLOCK OFF”

To drop the volume in a moment

Press SOURCE for more than 1 second while

listening to any source “ATT” starts flashing on the

display, and the volume level will drop in a moment

To resume the previous volume level, press the

button for more than 1 second again

Toturn off the power

Press and hold OFF/r until “SEE YOU” appears

on the display

Note

When you use this unitfor thejtst time, set the built-in

clock correctly see page 17

RADIO

BASIC

OPERATIONS

Listeningto the radio

You can use either automatic searching or manual

searching to tune into a particular station

Searchinaa station automatically:

Autosearch

Select the band.

l3l Press SOURCE to select

tuner as the source

If necessary, press BAND

repeatedly to select the

band

Each time you press the button, the band

changes as follows:

FMl-FM2-FM3-AM

Select&i band appears

Note

This receiver has three FM bands (FMI, FM2,

FM3) You can use any one of them to listen to an

FM broadcast

Start searching a station.

Press A ))1 to search

stations of higher frequencies

Press H V to search

stations of lower frequencies

‘\ \

When a station is received, searching

stops

To stop searching before a station is received,

press the same button you have pressed for

searching

To tune in FM stations only with strong signals

1 Press MODE

“MODE”appears on the display, and the number

buttons can work as different function buttons

2 Press LOCAL, while “MODE” is still on the display,

so that the LOCAL indicator lights up on the

display

This function works only while searching FM

stations, including SSM preset (see page 9)

Each time you press the button, the LOCAL

indicator lights up and goes off alternately

Searchinaa stationmanually:

Manualsearch

1 Select the band.

Press SOURCE to select

tuner as the source

If necessary, press BAND

repeatedly to select the

band

Each time you press the button, the band

changes as follows:

FMl-FM2-FM3-AM

Note

This receiver has three FM bands (FMI, FM2,

FM3) You can use any one of them to listen to an

FM broadcast

Press and hold A ))1 or 144 v until

“M” (manual) starts flashing on the

display

3 Tune into a station you want while “M”

is flashing

Press h -1 to tune into

stations of higher frequencies

Tr Press IH4 v to tune into

‘\\ \.

,./ ‘. stations of lower frequencies

If you release your finger from the button,

the manual mode will automatically turn off

after 5 seconds

If you hold down the button, the frequency

keeps changing until you release the button

When an FM stereo broadcast is hard to

receive:

Press MODE while listening to an FM stereo

broadcast (the ST indicator lights up while

receiving an FM stereo broadcast)

2 Press MONO, while “MODE” is still on the display,

so that the MO indicator lights up on the display

The sound you hear becomes monaural but the

reception will be improved (the ST indicator goes

off)

Each time you press the button, the MO indicator

lights up and goes off alternately

Storingstationsin memory

You can use one of the following two methods to

store broadcasting stations in memory

Automatic preset of FM stations SSM (Strong-

station Sequential Memory)

Manual preset of both FM and AM stations

FMstation automatic weset: SSM

You can preset 6 local FM stations in each FM band

(FMl, FM2 and FM3)

Select the FM band (FMl-3) you want

to store FM stations into.

Press SOURCE to select

tuner as the source

If necessary, press

BAND repeatedly to

select the band

Each time you press the button, the band

changes as follows

r’ FM1 -FM2-FM3- i:

Press and hold both buttons for more

than 2 seconds.

-- -- 4 5:‘: r 7

.- -- i j

“SSM” appears, then disappears when automatic

preset is over

Local FM stations with the strongest signals are

searched and stored automatically in the band

number you have selected (FMl, FM2 or FM3)

These stations are preset in the number buttons

- No 1 (lowest frequency) to No 6 (highest

frequency)

When automatic preset is over, the station stored

in number button 1 will be automatically tuned in

Manualweset

You can preset up to 6 stations in each band (FM1 ,

FM2, FM3 and AM) manually

Ex Storing an FM station of 88 3 MHz into the

preset number 1 of the FM1 band

1 Select the band (FMl)

Press SOURCE to

select the tuner as the

source

Press BAND repeatedly

to select the FM1 band

2 Tune into a station of 88.3 MHz

Press h ))I to tune into

stations of higher frequencies

Press I44 v to tune into

“,., ‘\ stations of lower frequencies

‘.

Press and hold the number button (in

this example, 1) for more than 2

seconds

Band number and “MEMO” appear

alternately for a while ,

4 Repeat the above procedure to store

other stations into other preset

numbers.

Notes

A previouslv preset station is erased wherl n new station

is stored in the same preset number:

Preset stations are erased when the power s~cpplv to the

memory circuit is interrupted (for example, during bntterv

replacement) If this occurs, preset the station7 ngnin

Tuninainto a uresetstation

You can easily tune into a preset station

Remember that you must store stations first If you

have not stored them yet, see “Storing stations in

memory” on pages 9 and 10

7 Select the band

0 Press SOURCE to select

tuner as the source

If necessary, press

BAND repeatedly to

select the band

Each time you press the button, the band

changes as follows

FMl- FM2 - FM3 -

2 Select the number (l-6) for the preset

station you want.

When using this unit in an area other than

North or South America:

You need to change the AM/FM channel

intervals See “To change the AM/FM

channel intervals - AREA” on page 19

Andere Handbücher für KD-LX100

Inhaltsverzeichnis

Andere JVC Autoempfänger Handbücher

JVC

JVC KS-F150M Bedienungsanleitung

JVC

JVC KD-AHD59 - Radio / HD Leitfaden

JVC

JVC KS-F540R Leitfaden

JVC

JVC EXAD KD-LHX601 Bedienungsanleitung

JVC

JVC KD-AHD59 - Radio / HD Bedienungsanleitung

JVC

JVC KD-G111 Leitfaden

JVC

JVC KD-R900 Bedienungsanleitung

JVC

JVC KD-R821BTEY Bedienungsanleitung

JVC

JVC KD-S32 Leitfaden

JVC

JVC FX-335TN Bedienungsanleitung

JVC

JVC KD-SX990 Bedienungsanleitung

JVC

JVC KD-AVX40 - DVD Player With LCD monitor Bedienungsanleitung

JVC

JVC KS-F350R Bedienungsanleitung

JVC

JVC KD-SH99R Montageanleitung

JVC

JVC KD-G436 Bedienungsanleitung

JVC

JVC KS-FX463R Leitfaden

JVC

JVC KD-S52 Leitfaden

JVC

JVC KW-GX500 Bedienungsanleitung

JVC

JVC KW NX7000 - Double Din Navigation Bedienungsanleitung

JVC

JVC KD-DB52 Bedienungsanleitung

JVC

JVC KD-G309 Bedienungsanleitung

JVC

JVC KD-DB101 Bedienungsanleitung

JVC

JVC KD-R705 Bedienungsanleitung

JVC

JVC KD-SHX705 Leitfaden

Beliebte Autoempfänger Handbücher anderer Marken

Motorola

Motorola VWA63 Bedienungsanleitung

Nextar

Nextar D3201 Bedienungsanleitung

Alpine

Alpine CDE-163BT Bedienungsanleitung

Pioneer

Pioneer DEH-P645R Bedienungsanleitung

Axxera

Axxera XDMA7600 Betriebsanleitung

XM OnyX Bedienungsanleitung

Sound Storm

Sound Storm STM93R Bedienungsanleitung

Soundstream

Soundstream VIR-5000 Bedienungsanleitung

Avson

Avson MKT Platform Bedienungsanleitung

Sony

Sony MEX-1HD - Audio Library System Bedienungsanleitung

Pioneer

Pioneer DVH-P500UB Bedienungsanleitung

Blaupunkt

Blaupunkt SANTIAGO CR 87 Bedienungsanleitung

Sony

Sony CDX-4160 - Cd Receiver Bedienungsanleitung

XFIRE AUDIO

XFIRE AUDIO BMW42S Bedienungsanleitung

VDO

VDO CD 2253 Bedienungsanleitung

Volvo

Volvo 13 84 580 Bedienungsanleitung

ZENEC

ZENEC ZE-160DVD Bedienungsanleitung

Medion

Medion Car Audio Bedienungsanleitung