Kaba Simplex 1000 Series Installationsanleitung

Andere Handbücher für Simplex 1000 Series

3

Inhaltsverzeichnis

Andere Kaba Türschloss Handbücher

Kaba

Kaba Ilco 790/79 Series Bedienungsanleitung

Kaba

Kaba SIMPLEX 900 Series Bedienungsanleitung

Kaba

Kaba PowerLever 455 Series Bedienungsanleitung

Kaba

Kaba E-PLEX 5x70 Series Bedienungsanleitung

Kaba

Kaba E-PLEX Bedienungsanleitung

Kaba

Kaba C-lever compact Bedienungsanleitung

Kaba

Kaba SIMPLEX 5000 CYLINDRICAL Bedienungsanleitung

Kaba

Kaba Saflok MT RFID Bedienungsanleitung

Kaba

Kaba 7002 Series Bedienungsanleitung

Kaba

Kaba E-PLEX 2000 Bedienungsanleitung

Kaba

Kaba LCLX Bedienungsanleitung

Kaba

Kaba Simplex 7104 Series Bedienungsanleitung

Kaba

Kaba E-Plex 5x00 Cylindrical Bedienungsanleitung

Kaba

Kaba C-lever Bedienungsanleitung

Kaba

Kaba C-lever compact Bedienungsanleitung

Kaba

Kaba EF 680E Bedienungsanleitung

Kaba

Kaba E-Flash EF780 Bedienungsanleitung

Kaba

Kaba Ilco 790 Series Montageanleitung

Kaba

Kaba E-PLEX 50XX SERIES Bedienungsanleitung

Kaba

Kaba E-PLEX 5X51 Bedienungsanleitung

Kaba

Kaba E-Plex 5900 Bedienungsanleitung

Kaba

Kaba Saflok RT Series Bedienungsanleitung

Kaba

Kaba Digital Cylinder Bedienungsanleitung

Kaba

Kaba C-lever Bedienungsanleitung

Beliebte Türschloss Handbücher anderer Marken

Assa Abloy

Assa Abloy effeff 827A-IP Bedienungsanleitung

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Access Control - 1000 Series PBL FAQ

Note: If your lock is opening on every turn of the knob or lever, except upon entering a code,

this may be a ZERO CODE. Before attempting to remove the lock from the door, refer to the

troubleshooting procedures outlined at bottom of this document for a zero code

symptom/solution.

1000 Series FAQ

Changing the Code / Combination

The door must be open.

On models with the passage feature, make sure the passage feature is disengaged: turn knob

or key should be in vertical position (A) (see figure 1).

http://www.kaba-ilco.com/access_control/support/pbl_faq/changing_code_combination/1000_series.asp (1 of 3) [5/21/2004 11:13:59 AM]

Access Control - 1000 Series PBL FAQ

1. Insert the DF-59 control key (B) into the combination change

plug assembly (C) and unscrew the cylinder by turning the key

counterclockwise. Remove the combination change plug to gain

access to the combination change sleeve (D) (see figure 1).

2. Turn the outside knob once clockwise (all the way, until it

stops) then release. The latch should not retract (see figure 4).

3. Enter the existing combination. On new installations, use the

factory-set combination: depress 2 and 4 simultaneously,

(release), then 3 (release). You should feel a slight click as each

button is depressed.

4. Insert the spanner wrench as shown in figure 2 to engage the

combination change sleeve (A). Gently turn the spanner wrench

clockwise to the stop position (a slight click should be felt), then

turn the spanner wrench counterclockwise to the stop position (A)

(see figure 3). Remove the spanner wrench.

5. Turn the outside knob once clockwise all the way until it stops,

then release. The latch should not retract (see figure 4).

6. Choose your new combination, write it down, then enter the

new combination — depress buttons carefully (a slight click should

be felt as each button is depressed).

Note: You can use one button or all five for a combination, but

each button can only be used once. You can depress two or more

buttons simultaneously as a step in the combination.

7. Turn the outside knob clockwise once, all the way, until it stops,

hold in position and make sure the latch is retracted (see figure

5). Release the knob.

8. Turn the knob clockwise again to the stop position. At this

point, the latch (A) should not retract unless you enter the new

combination (see figure 4).

9. Resecure the combination change plug assembly by screwing it

in clockwise with the DF-59 key — do not overtighten (see figure

6). Remove the key and store it in a secure area with these

instructions and the spanner wrench.

Troubleshooting

Symptom/problem: Outside knob when turned always retracts

latch without depressing any buttons.

http://www.kaba-ilco.com/access_control/support/pbl_faq/changing_code_combination/1000_series.asp (2 of 3) [5/21/2004 11:13:59 AM]

Access Control - 1000 Series PBL FAQ

Cause: Lock is in zero combination.

Solution: Follow the procedure for changing a combination except omit step 3 (do not enter the

existing combination).

PRINT THIS SECTION

PREVIOUS PAGE

http://www.kaba-ilco.com/access_control/support/pbl_faq/changing_code_combination/1000_series.asp (3 of 3) [5/21/2004 11:13:59 AM]