Kenmore PowerMate Nozzle Bedienungsanleitung

Model/Modelo/Modèle: BC1001

Use & Care Guide

Manual de Uso y Cuidado

Manuel d'entretien et d'utilisation

www.kenmorefloorcare.com

Kenmore and the Kenmore logo are registered

trademarks of KCD IP, LLC and/or Transform SR

Brands LLC and are used under license.

Vacuum Cleaner Help Line:

1-877-531-7321 (US) / 1-844-608-3081 (CA)

8:00am - 5:00pm EST, M-F

- 2 -

WARRANTY

KENMORE LIMITED WARRANTY

FOR ONE YEAR from the date of sale this product is warranted against defects in material

or workmanship.

WITH PROOF OF SALE a defective product will be replaced free of charge.

The Kenmore brand is used under license. Direct all claims for warranty service to: Cleva

North America, Inc., 1-877-531-7321 (US) / 1-844-608-3081 (CA).

This warranty does not cover filters or belts, which are expendable parts that can wear

out from normal use within the warranty period.

This warranty is void if this product is ever used for other than private household purposes.

This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

Cleva North America, Inc., Greenville SC 29607

- 3 -

WARNING!

Your safety is important to us. To reduce the risk of fire, electrical shock, injury to persons

or damage when using your vacuum cleaner, follow basic safety precautions including the

following:

IMPORTANT SAFETY INSTRUCTIONS

• Use your PowerMate®only as described

in this guide. Use only with manufacturer’s

recommended vacuum cleaners:

81214/81414/BC2005/BC3005/22614.

• Disconnect electrical supply before

servicing or cleaning out the brush area.

Failure to do so could result in brush

unexpectedly starting causing personal

injury from moving parts.

• Do not leave vacuum cleaner when

plugged in. Unplug from outlet when

not in use and before performing

maintenance.

• To reduce the risk of electrical shock –

Do not use outdoors or on wet surfaces.

• Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

• Do not use with a damaged cord or

plug. If PowerMate®is not working as it

should, has been dropped, damaged,

left outdoors, or dropped in water,

immediately discontinue use and call

1-877-531-7321 (US) / 1-844-608-3081

(CA) for assistance.

• Do not pull or carry by cord, use cord as

a handle, close a door on cord, or pull

cord around sharp edges or corners. Do

not run PowerMate®over cord. Keep

cord away from heated surfaces.

• Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

• Do not handle plug or PowerMate®with

wet hands.

• Do not put any objects into openings.

Read all instructions in this guide before assembling or using your PowerMate.

• Do not use with any opening blocked;

keep free of dust, lint, hair, and anything

that may reduce air flow.

• Keep hair, loose clothing, fingers, and all

parts of body away from openings and

moving parts.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not put on chairs, tables, etc. Keep on

floor.

• Do not pick up flammable or combustible

liquids (gasoline, cleaning fluid, perfumes,

etc.), or use in areas where they may be

present. The fumes from these substances

can create a fire hazard or explosion.

• Do not pick up anything that is burning or

smoking, such as cigarettes, matches, or

hot ashes.

• Do not use vacuum cleaner without dust

cup and/or filters in place.

• Always change the dust bag after

vacuuming carpet cleaners or freshener,

powders, and fine dust. These products

clog the bag, reduce airflow and can

cause the bag to burst. Failure to change

the bag could cause permanent damage

to the vacuum cleaner.

• Do not use the PowerMate®to pick up

sharp hard objects, small toys, pins,

paper clips, etc. They may damage the

vacuum cleaner.

• Do not operate the vacuum cleaner

without the exhaust filter or filter door in

place.

- 4 -

IMPORTANT SAFETY INSTRUCTIONS

• The hose contains electrical wires. Do not

use when damaged, cut, or punctured.

Replace if cut or worn. Do not pick up

sharp objects.

• Always turn off and unplug vacuum

cleaner before connecting or

disconnecting PowerMate®.

• Hold plug when rewinding onto cord

reel. Do not allow plug to whip when

rewinding.

• You are responsible for making sure that

your PowerMate®is not used by anyone

unable to operate it properly.

SAVE THESE INSTRUCTIONS

Proper assembly and safe use of your PowerMate®are your responsibilities. Your vacuum

cleaner is intended for Household Use. Read this Use & Care Guide carefully for important

use and safety information. This guide contains safety statements under warning and caution

symbols.

- 5 -

PARTS AND FEATURES

It is important to know your PowerMate’s parts and features to ensure its proper and safe

use. Review these before using your PowerMate®.

REPLACEMENT PARTS

Part Part No. (US) Part No. (CA)

Belt KC28SBZTZ000 -

Brushroll Agitator KC84REEJZ000 -

To order a replacement part, call 1-877-531-7321 (US) / 1-844-608-3081 (CA).

Height Adjustment

Pedal

Wand Quick

Release Pedal

Belt

Furniture Guard

Edge Cleaner

(Not Shown)

Swivel

Height Adjustment

Indicator

Brushroll Status

Indicator

- 6 -

To attach, align wand and insert onto

PowerMate®until the wand locks into

place.

Turn power switch to the OFF position before servicing, attaching to, or removing from the

vacuum cleaner handle.

INSTALLATION AND REMOVAL INSTRUCTIONS

To remove wand from PowerMate®, lock

wand in upright position.

Press wand release pedal with foot and

pull the wand straight up and out of

PowerMate®.

- 7 -

HOW TO START

CAUTION

Moving parts! To reduce the risk of personal injury, DO NOT

touch the brushroll when vacuum cleaner is on. Contacting

the brushroll while it is rotating can cut, bruise or cause other

injuries. Always turn off and unplug from electrical outlet

before servicing.

Use caution when operating near children.

OPERATING INSTRUCTIONS

1. Pull cord out of canister to desired

length. The cord will not rewind until the

cord rewind button is pushed.

2. Plug the polarized power cord into a 120

Volt outlet located near the floor.

3. Lower the wand from upright position by

pressing on the HANDLE RELEASE pedal.

Handle

Release

4. Select a pile height setting by pressing

the height adjust pedal on the rear of

the PowerMate®. The pile height setting

shows on the indicator.

Height

Adjustment Indicator

Height

Adjustment

Pedal

5. Slide the handle control switch forward

to the CARPET position to start the

PowerMate brushroll spinning.

SUGGESTED PILE HEIGHT SETTINGS

Attention: Refer to your carpet

manufacturers cleaning recommendations.

Some more delicate carpets may

require that they be vacuumed with the

PowerMate®brushroll turned off to prevent

carpet damage.

For best deep down cleaning, use the

XLO setting. However, you may need to

raise the height to make some jobs easier,

such as scatter rugs and some deep pile

carpets, and to prevent the vacuum cleaner

from shutting off. Suggested settings are:

HI – Shag, deep pile, super-soft, or

ultraplush carpets, and scatter rugs.

MED – Medium to deep pile.

LO – Low to medium pile.

XLO – The preferred setting for many

carpets and also for bare floors.

NOTE: To protect bare floors, slide the 3-

way On/Off switch to the FLOOR position

to turn off rotation.

CAUTION

DO NOT leave the PowerMate®running

in one spot for any length of time.

Damage to carpet may occur.

- 8 -

HOW TO START

CAUTION

Product Damage Hazard

Use care if the PowerMate®and wand is

left in the upright position as it may tip

over easily. Property damage can occur

if tipped.

SUGGESTED SWEEPING PATTERN

For best cleaning action, the PowerMate®

should be pushed straight away from

you and pulled straight back. At the end

of each pull stroke, the direction of the

PowerMate®should be changed to point

into the next section to be cleaned. This

pattern should be continued across the

carpet with slow, gliding motions.

NOTE: Fast, jerky strokes do not provide

complete cleaning.

EDGE CLEANER

Active brush edge cleaners are on both

sides of the PowerMate®. Guide either side

of the PowerMate®along base-boards

or next to furniture to help remove dirt

trapped at carpet edges.

Brushroll Status

Indicator

PERFORMANCE/SAFETY FEATURES

OVERLOAD PROTECTOR

The PowerMate®has built-in protection

against motor and belt damage should the

brushroll jam. If the brushroll slows down

or stops, the overload protector shuts off

the PowerMate®and the brushroll status

indicator emits red light. The canister

motor will continue to run.

To correct problem: Turn off and unplug

vacuum cleaner, remove obstruction, then

turn on the vacuum cleaner again. The

brushroll status indicator will be off. If the

PowerMate®motor still does not run after

restart, immediately discontinue use and

call 1-877-531-7321 (US) / 1-844-608-3081

(CA) for assistance.

- 9 -

WARNING

Personal Injury Hazard

To avoid accidental brushroll starting,

always turn off and unplug the vacuum

cleaner before cleaning the brushroll

area. Failure to do so can result in

personal injury.

Always follow all safety precautions

when performing maintenance to the

PowerMate®.

TO REMOVE BELT

1. Press handle release pedal and lower the

swivel. Turn PowerMate®upside down

and remove the four (4) screws securing

base to PowerMate®cover.

2. Turn PowerMate®right side up. Loosen

the rear and side latches. (A flat blade

screwdriver may be required.)

3. Grasp cover by rear and pull up to

remove it from base.

4. Lift brushroll assembly out and remove

worn belt.

- 10 -

BELT CHANGING AND BRUSHROLL CLEANING

POWERMATE®CARE

WARNING

Electrical Shock or Personal Injury

Hazard

Always turn off and unplug vacuum

cleaner before performing maintenance

to the vacuum cleaner. Failure to do

so could result in electrical shock or

personal injury from vacuum cleaner

suddenly starting.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kenmore Staubsauger Handbücher

Kenmore

Kenmore 721.21295 Bedienungsanleitung

Kenmore

Kenmore 116.81714 Bedienungsanleitung

Kenmore

Kenmore SEARS 116.25512 Bedienungsanleitung

Kenmore

Kenmore 116.33920 Bedienungsanleitung

Kenmore

Kenmore 116.30912 Bedienungsanleitung

Kenmore

Kenmore 116.23103C Bedienungsanleitung

Kenmore

Kenmore 116.30611C Bedienungsanleitung

Kenmore

Kenmore 3704 - Bagless Upright Vacuum Bedienungsanleitung

Kenmore

Kenmore 400 series Bedienungsanleitung

Kenmore

Kenmore 116.23485C Bedienungsanleitung

Kenmore

Kenmore 11632729 Bedienungsanleitung

Kenmore

Kenmore Intuition BU4050 Bedienungsanleitung

Kenmore

Kenmore 116.27212 Bedienungsanleitung

Kenmore

Kenmore FeatherLite DU1040 Bedienungsanleitung

Kenmore

Kenmore BC4040 Bedienungsanleitung

Kenmore

Kenmore 116.31675 Bedienungsanleitung

Kenmore

Kenmore Kenmore 721.33189 Bedienungsanleitung

Kenmore

Kenmore CSV Go 125.10438910 Bedienungsanleitung

Kenmore

Kenmore 116.23110C Bedienungsanleitung

Kenmore

Kenmore Vacuum Cleaner Bedienungsanleitung

Kenmore

Kenmore CSV Go XL Bedienungsanleitung

Kenmore

Kenmore Intuition BU4021 Bedienungsanleitung

Kenmore

Kenmore 116.10065 Bedienungsanleitung

Kenmore

Kenmore 116.30612C Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung