KERN ORA 90 BE Bedienungsanleitung

ORA_90BE_1RE-BA-e-1510

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen, Germany

E-mail: info@kern-sohn.com

Tel: +49-[0]7433-9933-0

Fax: +49 (0)7433-9933-149

Internet: www.kern-sohn.com

Operating manual

Analogue refractometer

KERN ORA 90 BE Analogue Expert

3x Brix scale

KERN ORA 1 RE Analogue Expert

3x nD scale

Version 1.0

01/2015

ORA_90BE_1RE-BA-e-1510 2

KERN ORA

Version 1.0 01/2015

Operating instructions

Analogue refractometer

Contents

Technical data................................................................................................ 3

Description..................................................................................................... 4

General information....................................................................................... 5

3.1

Intended use ............................................................................................................................. 5

3.2

Warranty.................................................................................................................................... 5

Basic safety information............................................................................... 6

4.1

Follow the instructions in the operating manual .................................................................. 6

4.2

Warning ..................................................................................................................................... 6

Supplied items ............................................................................................... 7

Before the first use........................................................................................ 7

Use/measurement.......................................................................................... 7

7.1

Additional advice...................................................................................................................... 8

7.2

Measuring procedure............................................................................................................... 9

Cleaning and maintenance ......................................................................... 10

Storage ......................................................................................................... 10

Service.......................................................................................................... 10

Disposal........................................................................................................ 10

Additional information................................................................................. 10

Brix to refractive index (nD) conversion table .......................................... 11

Annex.............................................................................................................. 1

3 ORA_90BE-BA-e-1510

1 Technical data

Models

KERN

Measuring

range

and

Scales

Scale gradua-

tions

Accuracy

Dimensions

Product Net weight

ORA 90BE Brix: 0-42%

Brix: 42-71%

Brix: 71-90%

0.2 % Brix

200x40x40mm 0.600kg

ORA 1RE nD: 1. -

1.5200

0.005 nD 200x40x40mm 0.600kg

Example scale on the ORA 90 BE

ORA_90BE_1RE-BA-e-1510 4

2 Description

1. Prism cover

2. Prism surface

3. Adjusting wheel measuring range

4. Dispersion adjusting ring

5. Optical tubes

6. Eyepiece with diopter adjustment ring

7. Storage box

8. Pipette

9. Refractometer

10. Distilled water / calibration liquid

11. Tools

12. Cleaning cloth

5 ORA_90BE-BA-e-1510

3 General information

3.1 Intended use

The refractometer is a measuring instrument for determining the refractive index of

transparent substances in liquid or in some cases also in the solid state. It is used to

observe the behaviour of light as it passes from a prism with known properties to the

substance being tested.

Use of the refractometer for other purposes is contrary to its intended use and may

be hazardous. The manufacturer shall not be liable for any damages caused by im-

proper use.

3.2 Warranty

The warranty shall be void in the event of:

Failure to observe the instructions in the operating manual

Use for purposes other than those described

Modifications or opening the device housing

Mechanical damage and/or damage resulting from media, liquids, natural wear

and tear

ORA_90BE_1RE-BA-e-1510 6

4 Basic safety information

4.1 Follow the instructions in the operating manual

Carefully read through the operating manual even if you have prior

experience with KERN refractometers.

Every language version includes a non-authoritative translation.

The original German document is the definitive version.

4.2 Warning

Do not let acids come into contact with skin or eyes. If acid comes into contact

with skin, flush with copious amounts of water. Shower if larger areas of skin

are affected.

If acid comes into contact with eyes, keep the eyelid open and flush the eye

with running lukewarm water from the outer corner to the inner corner. Flush

eyes for at least 15 minutes. Then consult a doctor or ophthalmologist imme-

diately.

Thoroughly clean the refractometer after each use.

The refractometer must not be exposed to extreme temperatures, high me-

chanical stresses, strong direct sunlight or high humidity.

This refractometer is not a toy. Keep out of reach of children.

Make sure that you will not be hit by anything else while you are using the re-

fractometer, as this could cause serious eye injuries

The rubber eyeshade may cause irritation when in prolonged contact with the

skin. If this happens, consult your doctor.

Do not touch the lenses with your fingers.

7 ORA_90BE-BA-e-1510

5 Supplied items

After unpacking and before using the device for the first time, check that all listed

parts have been supplied. Replace damaged or faulty parts immediately and do not

put them into operation.

Refractometer

Storage box

Pipette

Tools

Cleaning cloth

6 Before the first use

Remove the protective film (if present) from the prism surface [2] and move the

measuring range adjusting wheel [3] to position 1.

7 Use/measurement

The refractometer can be used to quickly and accurately determine the refractive in-

dex of transparent substances, liquid or solid ones. Please make sure your hands are

dry before handling the measuring device.

The measuring instrument has three measuring ranges. Please use the measuring

range adjusting wheel on the underside of the casing to switch measuring ranges.

The light falling on the prism can be changed using a rotating flap on the underside of

the prism.

In addition, the refractometer is provided with an adjusting ring [4], which can reduce

chromating, primarily with low liquid concentrations.

The light/dark transition is clearly visible.

ORA_90BE_1RE-BA-e-1510 8

Important!

The ambient/room temperature and the sample temperature influence the refracto-

meter measuring result.

The scales are designed for an ambient temperature of +20 °C!

If the measurements are carried out at a temperature other than +20 °C, the results

must be correspondingly corrected.

A correction table can be found in the annex, Point 13.

7.1

Additional advice

It is important that the samples being measured are representative samples. Meas-

urements should be carried out quickly on samples that evaporate easily. The sam-

ples should be at the same temperature as the measuring instrument in order to

achieve an accurate result.

9 ORA_90BE-BA-e-1510

7.2

Measuring procedure

Make sure your hands are dry before handling the refractometer.

Open the prism cover [1] and use the supplied pipette [8] to apply a few drops

of the sample liquid [8] onto the prism surface [2], then close the prism cover

[1]. Spread the liquid evenly by pressing down on the prism cover [1].

Hold the device horizontally and wait about 30 seconds (for optimal tempera-

ture equalisation between the sample and device).

View the measurement scale through the eyepiece [6]. Point the prism surface

[2] of the refractometer at a bright light source while doing this.

The light falling on the prism can be changed using a rotating flap on the un-

derside of the prism.

Rotate the adjustment ring [6] on the eyepiece [6] to adjust the focus.

The boundary line will move on the measurement scale depending on the

concentration. This bright/dark boundary line shows the result directly on the

scale.

The measuring instrument has three measuring ranges. Please use the

measuring range adjusting wheel on the underside of the casing to switch

measuring ranges.

The light/dark boundary can be brought into sharp focus using the dispersion

adjusting ring [6]. This is useful for low liquid concentrations.

If the temperature deviates from +20 °C, correct the measured result using the

corresponding value from the temperature correction table [13].

Carefully clean the supplied pipette [8] and the refractometer after carrying out

the measurement.

Important!

After every measurement, use a lint-free, absorbent cloth to remove the fluids from

the prism surface [2] and prism cover [1]. Then carefully clean the prism and prism

cover using a cloth moistened with water or if necessary alcohol, and dry both parts

using a soft, dry and lint-free cloth. Avoid rubbing the prism [2].

ORA_90BE_1RE-BA-e-1510 10

8 Cleaning and maintenance

Clean the refractometer using a soft, lint-free cloth moistened with water, or if neces-

sary alcohol. Do not use any aggressive or abrasive cleaning agents. Never immerse

the device in water or hold it under running water. Never handle the device with wet

or damp hands.

Never touch the measuring prism [2] with hard tools made from plastic, wood, rubber,

metal, glass etc. Hard objects can quickly damage the relatively soft prism glass, re-

sulting in measurement errors.

The refractometer is maintenance-free.

Cleaning should be carried out immediately before and after each use of the refrac-

tometer to maximise its life and optimise measurement results.

9 Storage

Store the refractometer in a dry, non-corrosive environment, preferably between

10°C and 30 °C.

10 Service

After reading this operating manual, if you have any questions about setting up or

using the refractometer, or if any unexpected problem occurs, please contact your

dealer. The device housing may only be opened by trained service technicians

authorised by KERN.

11 Disposal

The packaging consists of environmentally friendly materials which can be disposed

of via local recycling facilities.

The device and storage box should be disposed of by the operator in accordance

with applicable national or regional regulations at the place of use.

12 Additional information

The product may differ slightly from the illustrations. We reserve the right to make

changes to reflect technical advancements, decorations not included.

Avoid exposing the refractometer to direct sunlight!

Never bring the refractometer into contact with solvents.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KERN Messgerät Handbücher

KERN

KERN TMBA-A01-A Bedienungsanleitung

KERN

KERN ORA 3AA/AB Beer Bedienungsanleitung

KERN

KERN ABP Bedienungsanleitung

KERN

KERN DAB-SH-e-1610 Bedienungsanleitung

KERN

KERN KIB-A12 Bedienungsanleitung

KERN

KERN MSF 200 Bedienungsanleitung

KERN

KERN DLB-A Bedienungsanleitung

KERN

KERN KFE-TM Bedienungsanleitung

KERN

KERN ORA 10 BA Bedienungsanleitung

KERN

KERN mlb-c Bedienungsanleitung

KERN

KERN MRS120-3 Bedienungsanleitung

KERN

KERN MBC-A01 Bedienungsanleitung

KERN

KERN MSF 200N Bedienungsanleitung

KERN

KERN ORA 1WA/WB Bedienungsanleitung

KERN

KERN TMBA-A01-A Bedienungsanleitung

KERN

KERN DBS 60-3 Bedienungsanleitung

KERN

KERN MLS 50-3C Bedienungsanleitung

KERN

KERN DLB-A01 Bedienungsanleitung

KERN

KERN ORA 10 BB Bedienungsanleitung

KERN

KERN DLB 160-3A Bedienungsanleitung

KERN

KERN DAB-BA-e-1511 Bedienungsanleitung

KERN

KERN MSA 80 Bedienungsanleitung

KERN

KERN DLB A01N Bedienungsanleitung

KERN

KERN RPOMAT MSB 80 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung