Kimo HD110 Bedienungsanleitung
Thermo-hygrometer
HD110
DESCRIPTION OF THE DEVICE
Backlight key
Hold/min/max key
Select key
On/Off/Esc key
OK key
➢Turn on the device by pressing on “On/Off/Esc”
The device displays its name “HD110” then the measured values.
➢Put the probe to the required location
The device displays the temperature and hygrometry measurements.
➢Press “OK”.
The device displays the dew point measurement with the temperature measurement.
➢Press again on “OK”
The device displays the dew point measurement with the hygrometry measurement.
PERFOM A MESUREAMENT
38.3
% RH
20.5
°C
5.8
°Ctd
38.3
% RH
20.5
°C
5.8
°Ctd
Screen 1 Screen 2
Screen 3
OK
OK
OK
DISPLAY THE MINIMUM AND THE MAXIMUM
➢Once the measurement is frozen:
➢Press “Hold/min/max”
The device displays the maximum value of hygrometry measured since the last questioning at the top of the screen and the minimum
value of hygrometry measured since the last questioning at the bottom of the screen.
➢Press “Hold/min/max”
The device displays the maximum value of temperature measured since the last questioning at the top of the screen and the minimum
value measured since the last questioning at the bottom of the screen.
➢Press again “Hold/min/max”
The device displays the maximum value of dew point measured since the last questioning at the top of the screen and the minimum
value of dew point measured since the last questioning at the bottom of the screen.
➢Press “On/Off/Esc” to return to the measurements display
ADJUST THE DEVICE
Select the measurin unit:
➢Press “Select”
“UNIT” blinks on screen.
➢Press “OK”, the measuring unit currently used blinks at the bottom of the screen
➢Press “Select” to select the required measuring unit: °C or °F
➢Press“OK” to validate
“UNIT” blinks on screen.
➢Press “On/Off/Esc” to return to the measurement
1x
SEL.
UNIT
°C
UNIT
SEL.
°C / F°
SelectSelect
SEL.
UNIT
°C
On/Off/
Esc
OK
38.3
%RH
20.5
°C
UNIT
SEL.
°C
OK
SEL.
AUTO
OFF
OFF
1x 2x
Select Select
3x
SEL.
UNIT
°C
Select
SEL.
BEEP
ON
Device drop-down menu
FIREEZE THE MEASUREMENT
During the measurement:
➢Press “Hold/min/max” to freeze the measurement
“Hold” displays on screen and the measurements are frozen.
➢Press “On/Off/Esc” to exit the hold function
The device returns to the measurements display.
➢Remove the front part at the back of the device
➢Change the old batteries by AAA LR03 1 5 V batteries
➢Replace the front part
CHAN E THE BATTERIES
ACTIVATE THE BACKLI HT
➢Press on “Backli ht”: to activate the device backlight
➢To deactivate the backlight press again on “Backli ht”
Activate or deactivate the keys beep:
The device is on and displays the measurements.
➢Press “Select” until “BEEP” blinks on screen
➢Press “OK”
“OFF” or “ON” blinks on screen.
➢Press “Select” to activate the keys beep “ON” or deactivate the keys beep “OFF”
➢Press “OK” to validate
➢Press “On/Off/Esc” to return to the measurement
On/Off/
Esc
3x OK Select OK
SEL.
BEEP
ON
SEL.
BEEP
ON
38.3
% RH
20.5
°C
Select
BEEP
SEL.
OFF / ON
BEEP
SEL.
ON
Adjust the auto shut-off:
The device is on and displays the measurements.
➢Press “Select” until “AUTO OFF” blinks on screen
➢Press “OK”
The time before auto shut off blinks on screen
➢Press “Select” to select the time before device auto shut-off : 15, 30, 45, 60, 75, 90, 105, 120 minutes or OFF
➢Press “OK” to validate
➢Press “On/Off/Esc” to return to the measurement
38.3
% RH
20.5
°C
2x Select
AUTO
OFF
OFF
Select
AUTO
OFF
15 / 30mn
SEL.
AUTO
OFF
OFF
SEL.
AUTO
OFF
15mn
On/Off/
Esc
OK OK
➢Remove the front part at the back of the device
➢Change the old batteries by AAA LR03 1 5 V batteries
➢Replace the front part
CHAN E THE BATTERIES
ACTIVATE THE BACKLI HT
➢Press on “Backli ht”: to activate the device backlight
➢To deactivate the backlight press again on “Backli ht”
Activate or deactivate the keys beep:
The device is on and displays the measurements.
➢Press “Select” until “BEEP” blinks on screen
➢Press “OK”
“OFF” or “ON” blinks on screen.
➢Press “Select” to activate the keys beep “ON” or deactivate the keys beep “OFF”
➢Press “OK” to validate
➢Press “On/Off/Esc” to return to the measurement
On/Off/
Esc
3x OK Select OK
SEL.
BEEP
ON
SEL.
BEEP
ON
38.3
% RH
20.5
°C
Select
BEEP
SEL.
OFF / ON
BEEP
SEL.
ON
Adjust the auto shut-off:
The device is on and displays the measurements.
➢Press “Select” until “AUTO OFF” blinks on screen
➢Press “OK”
The time before auto shut off blinks on screen
➢Press “Select” to select the time before device auto shut-off : 15, 30, 45, 60, 75, 90, 105, 120 minutes or OFF
➢Press “OK” to validate
➢Press “On/Off/Esc” to return to the measurement
38.3
% RH
20.5
°C
2x Select
AUTO
OFF
OFF
Select
AUTO
OFF
15 / 30mn
SEL.
AUTO
OFF
OFF
SEL.
AUTO
OFF
15mn
On/Off/
Esc
OK OK
Once returned to KIMO, required waste collection will be assured in the respect of the environment in accordance to 2002/96/CE guidelines relating to WEEE
NTang – portable-HD110 – 10/11/17 – RCS (24) Périgueux 349 282 095 Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice
Inhaltsverzeichnis
Andere Kimo Messgerät Handbücher
Kimo
Kimo Luxmeter LX 100 Bedienungsanleitung
Kimo
Kimo AQ 100 Bedienungsanleitung
Kimo
Kimo SDA Bedienungsanleitung
Kimo
Kimo CT 100 0 Bedienungsanleitung
Kimo
Kimo MP 100 Bedienungsanleitung
Kimo
Kimo VT 200 Bedienungsanleitung
Kimo
Kimo MP130 Bedienungsanleitung
Kimo
Kimo SDA Bedienungsanleitung
Kimo
Kimo SL 100 Bedienungsanleitung
Kimo
Kimo DBM610 Bedienungsanleitung
Kimo
Kimo LV 110 Bedienungsanleitung
Kimo
Kimo DB 200 Bedienungsanleitung
Kimo
Kimo DS300 Bedienungsanleitung
Kimo
Kimo HD 100 Bedienungsanleitung
Kimo
Kimo KIMO TH210 Bedienungsanleitung
Kimo
Kimo MP 202 Handbuch
Kimo
Kimo SDA Bedienungsanleitung
Kimo
Kimo KIGAS 310 Bedienungsanleitung
Kimo
Kimo CT 110 Bedienungsanleitung
Kimo
Kimo SL200 Bedienungsanleitung
