Kodak i1800 Series Betriebsanleitung
Eastman Kodak Company
343 State Street
Rochester, NY 14650 U.S.A.
© Kodak, 2010. All rights reserved.
TM: Kodak
6J7418A
CYAN
MAGENTA YELLOW BLACKCYAN
8.5 x 11” Folded
GUIDE COVER-KODAK SCANNERS
FONTS
Whitney K Family
SIZE P/N SWATCHES
FILE FORMAT
DESIGN/IMPLEMENTATION
DATE
03.05.10
6J7418A
DE MEYER
4 COLOR PROCESS
ARTWORK NAME
PRINTING INFORMATION
0000-000
ECO LANGUAGES
ILLUSTRATOR CS4
EN
User’s
Maintenance
Guide
i1800 Series Scanners
A-61555
6J7418
A-61555 May 2010 5-1
5 Maintenance
This chapter provides:
• a cleaning frequency chart
• a list of cleaning tools and materials
• a list of supplies, consumables and accessories
• cleaning procedures for the scanner
• replacement procedures for customer-replaceable parts
IMPORTANT: Scanner components marked with a green tab indicate
operator-accessible parts.
Cleaning your scanner and preventative maintenance on a regular
basis is required to ensure the best possible image quality. The
following is a preventative maintenance procedure that is
recommended to prevent costly interruptions during production
scanning. Following this procedure as recommended should take
approximately 5 to 10 minutes.
Some document types generate more paper dust and debris and may
require more frequent cleaning than recommended.
NOTES:
• Some debris from the rubber tires on the feed module and separation
roller is normal. Tire debris does not always mean that the tires are
worn or damaged. After cleaning, inspect the tires for wear and
replace the separation roller or feed module if necessary.
• When cleaning rollers/tires, allow the rollers/tires to dry completely
before scanning.
• Use only the recommended cleaning supplies.
• Do not use canned/compressed air.
• Using unapproved cleaning fluids or solvents may damage the
rubber tires.
5-2 A-61555 May2010
Cleaning frequency
chart A recommended cleaning sequence includes vacuuming the scanner
transport, cleaning the residue from the feed module, separation roller
or drive rollers and cleaning the imaging guides.
Use the chart below as a guide to the order and how frequently you
should clean your scanner.
Cleaning tools and
materials Use only these cleaning tools and materials when performing routine
maintenance on your scanner. Use of any other cleaning materials
could damage your scanner.
•Kodak Digital Science Transport Cleaning Sheets
•Kodak Digital Science Roller Cleaning Pads
• Staticide wipes for Kodak Scanners
• A vacuum cleaner and tools
Procedure Start of
day Middle of
shift Start of new
shift
Vacuum output tray and input
areas (input elevator and
transport)
x
Clean all rollers x x
Vacuum transport area x x x
Remove and vacuum under
background strips x
Run transport cleaning sheet x x
Clean imaging guides - basic x x x
Clean imaging guides - thorough x x
A-61555 May 2010 5-3
Supplies,
consumables and
accessories
Contact your scanner supplier to order supplies.
NOTE: Items and catalog numbers are subject to change.
Ordering parts The following parts can be ordered from Parts Services.
Supplies/Consumables CAT No.
Kodak Feeder Consumables Kit for i600/i1800 Series
Scanners 108 4755
Kodak Feeder Kit for Ultralightweight Paper for i600/i1800
Series Scanners 896 5279
Kodak Extra-Large Feeder Consumables Kit for i600/i1800
Series Scanners 842 6157
Kodak Extra-Extra-Large Feeder Consumables Kit for i600/
i1800 Series Scanners 134 3680
Kodak Imaging Guide Set / for i600/i1800 Series Scanners 197 6703
Kodak Printer Ink Blotters, Front Side for i1800 Series
Scanners 125 7633
Kodak Printer Ink Blotters, Rear Side for i1800 Series
Scanners 114 1472
Enhanced Printer Black Ink Cartridge for Kodak i800/i1800
Series Scanners 818 3386
Enhanced Printer Red Ink Cartridge for Kodak i800/i1800
Series Scanners 159 6832
Kodak Digital Science Transport Cleaning Sheets (qty 50) 169 0783
High Resolution Printer Maintenance Kit 877 6254
High Resolution Printer Black Ink Cartridge for Kodak i1800
Series Scanners and Kodak Imagelink Microimager 70 822 1376
High Resolution Printer Red Ink Cartridge for Kodak i1800
Series Scanners and Kodak Imagelink Microimager 70 145 6532
Kodak Digital Science Roller Cleaning Pads (qty 24) 853 5981
Staticide Wipes for Kodak Scanners (qty 144) 896 5519
Kodak Calibration Targets (qty 5) 127 1436
Black Background (for i1800/i700/i600 Series Scanners) 801 4755
Accessories CAT No.
Kodak White Background Accessory 894 9000
Kodak Manual Feeder for the i1800 Series Scanners 874 1894
Kodak High Resolution Printer Accessory 815 0237
Parts Part No.
Exit deflector 3E9575
26 in. document extenders (qty 1 per box) 5E4754
30 in. document extenders (qty 1 per box) 9E3216
34 in. document extenders (qty 1 per box) 9E5277
5-4 A-61555 May2010
Cleaning procedures Follow the cleaning procedure below to ensure the best scanner
performance and image quality.
Cleaning the OCP
touchscreen The touchscreen requires very little maintenance. However,
periodically, it is recommended that you use a Staticide wipe to clean
the screen and dry it with a lint free cloth.
Vacuuming the output tray
and input elevator 1. Power down the scanner.
2. Remove the output tray.
3. Thoroughly vacuum the outputtray area and the input elevator area.
A-61555 May 2010 5-5
Cleaning the rollers Cleaning the rollers includes all of the rollers in the transport area, the
separation roller tires and the feed module tires.
1. Pull up on the pod release lever and open the pod.
2. Manually rotate and wipe the rollers with a roller cleaning pad.
IMPORTANT: The roller cleaning pad contains sodium lauryl ether
sulfate and sodium silicate which can cause eye
irritation. Refer to the MSDS for more information.
3. Dry the rollers with a lint-free cloth.
5-6 A-61555 May2010
Cleaning the separation roller tires
4. Pull the separation pad holder forward and remove the separation
roller.
5. Manually rotate and wipe the separation roller tires with a roller
cleaning pad. For best results wipe parallel to the ribs in order to
remove any residue between the ribs.
6. Inspect the tires. If the tires show signs of wear or damage, replace
the separation roller. See “Replacement procedures” later in this
chapter.
7. Reinstall the separation roller by aligning the slots on the separation
roller with the holders.
8. Close the pod.
A-61555 May 2010 5-7
Cleaning the feed module tires
9. Lift up the printer access cover.
10.Push the release lever down (located underneath the printer access
cover) to release and remove the feed module.
5-8 A-61555 May2010
11.Manually rotate and wipe the feed module tires with a roller cleaning
pad. For best results wipe parallel to the ribs in order to remove any
residue between the ribs.
12.Inspect the tires. If the tires show signs of wear or damage, replace
the feed module tires. See “Replacement procedures” later in this
chapter.
13.Reinstall the feed module by aligning the pins and fitting it into
position. Pull up on the release lever to lock it into place. Verify that
the feed module is securely in place and moves freely after you
install it.
14.Close the printer access cover.
Align
these
areas
A-61555 May 2010 5-9
Vacuuming the transport
area 1. Open the pod.
2. Thoroughly vacuum the entire transport area, paying particular
attention to these areas:
Vacuuming under the
background strips 1. Using the green tabs pull off the upper and lower background strips
and set them aside.
2. Vacuum the areas where the background strips are adhered to.
3. Reinstall the upper and lower background strips.
the edges of the transport the reflective tape near the
front of the transport
the reflective tape near the
front of the pod the three multifeed sensors at the base
of the transport and the pod
Andere Handbücher für i1800 Series
3
Inhaltsverzeichnis
Andere Kodak Scanner Handbücher
Kodak
Kodak i1405 Bedienungsanleitung
Kodak
Kodak Scanmate i1120 Bedienungsanleitung
Kodak
Kodak I780 - Document Scanner Bedienungsanleitung
Kodak
Kodak Scanmate i1120 Bedienungsanleitung
Kodak
Kodak i5800 Scanner Bedienungsanleitung
Kodak
Kodak Sidekick 1400U Bedienungsanleitung
Kodak
Kodak i24x0 Bedienungsanleitung
Kodak
Kodak PS810 Bedienungsanleitung
Kodak
Kodak i100 Series Bedienungsanleitung
Kodak
Kodak DirectView CR 500 System Bedienungsanleitung
Kodak
Kodak Truper 3210 Bedienungsanleitung
Kodak
Kodak I1420 - Document Scanner Bedienungsanleitung
Kodak
Kodak i4200 Bedienungsanleitung
Kodak
Kodak Scan Station 120EX Montageanleitung
Kodak
Kodak i5800 Scanner Bedienungsanleitung
Kodak
Kodak S2000f Series Bedienungsanleitung
Kodak
Kodak Scanmate i1120 Bedienungsanleitung
Kodak
Kodak 4C8894 Bedienungsanleitung
Kodak
Kodak I150 - Document Scanner Bedienungsanleitung
Kodak
Kodak Ngenuity 9090DB Bedienungsanleitung
