Kohler 32E Bedienungsanleitung
1
1290447-W2-B
32E
E
Installer: This manual is the property of the customer
and must be retained with the product for maintenence
and operational purposes.
Product Manual
2
1290447-W2-B
3
1290447-W2-B
X 1 q
X 1 q
X 1 q
X 1 q
32E
X 3 q
X 2 q
X 1 q
X 1 q
X 2 q
4
1290447-W2-B
X 1 q
X 1 q
X 1 q
X 3 q
X 1 q
32E BSP
5
1290447-W2-B
320 F
X 1 q
X 1 q
X 1 q
X 3 q
X 1 q
6
1290447-W2-B
32E
RADA 320 C
185 mm
49 mm
49 mm59 mm
127.5 mm
61 mm
41.5 mm
256 mm
314.5 mm
Ø83.5 mm
RADA 320 OEM
137 mm
Ø83.5 mm
185 mm
49 mm
49 mm
117 mm
32E BSP
7
1290447-W2-B
RADA 320 CF 118.5 mm
185 mm
49 mm
49 mm
108 mm
Ø83.5 mm
320 F
81290447-W2-B
Rada 32E
A suitable range is 16-37°C. Generally, temperatures higher than 37°C may cause
chemical interactions with the skin and result in further damage. At 16°C and below
hypothermia becomes a concern. Consulting a safety/health advisor will be a helpful
aid in the determination of the best temperature parameters. No two hazards are
exactly the same and each should be evaluated on a case-by-case basis".
Point of Use
Rada 32E Thermostatic Mixing Valves are suitable for installation at or near a point
potential for simultaneous operation.
9
1290447-W2-B
Rada 32E
Rada 32E is a Thermostatic Mixing Valve of “sealed for life” disposable cartridge construction.
For Emergency Drench Showers - The Rada 32E will pass a specied minimum of 76
litres per minute (l/min) and will ow a minimum of 38 l/min from direct cold water supply in
hot failure mode at 2.7 bar (40 psi) maintained equal inlet supply pressure.
For Emergency Eye Wash Stations - For single or multiple xture installation, the Rada 32E
will control accurately at ow rates from 76 to 8 l/min.
In ow applications between 76 and 38 l/min, the Rada 32E will pass approximately 50% of
original ow setting in hot failure mode.
In ow applications between 38 and 19 l/min, the Rada 32E will pass approximately 80% of
original ow setting in hot failure mode.
In ow applications below 19 l/min, the Rada 32E will pass approximately 95% of original
ow setting in hot failure mode.
Operational Specications
1. Site Adjustable—Mechanical maximum-temperature limit stop and single-temperature
locking features as a function of the temperature control handle design.
2. Thermal shutdown feature is designed to protect user from unsafe water temperatures
or hot water/chemical reaction should cold supply be interrupted during use.
3. Unique constant cold water ow design ensures that in the event of a hot supply failure
the Rada 32E will allow cold water to ow to xture.
4. Unique constant cold water ow feature allows the inlet hot water supply to be set within
a prescribed range, thus limiting the potential outlet temperature to a safe maximum in
the event of misadjustment, unauthorized tampering or thermostat failure. This feature
presumes that the correct initial commissioning was performed and that the cold water
supply has not been interrupted.
Technical Specications
• 32E - 1” BSP Female or 28 mm Compression
• 32E BSP - 3/4” BSP Male
• Chrome-plated DZR brass/polymer construction
• Operating pressures must be nominally equal
Maximum: 6.9 bar*
Minimum: 2.7 bar drench showers, 1.4 bar eye wash
• Integral replaceable cartridge-type inlet check valves
• Dual thermostatic elements
• Integral replaceable inlet strainers
• 38 LPM constant cold water ow in hot failure mode to open outlet at 2.7 bar pressure
drop
*High water pressures may deliver a volume and spray force that are injurious to the user.
Check with xture manufacturer or regulate water pressures within acceptable range.
10
1290447-W2-B
Safety Warnings
The function of a Thermostatic Mixing Valve is to deliver water consistently at a pre-designated
temperature.
Rada Thermostatic Mixing Valves are precision engineered to give continued superior and
safe performance provided:
1. They are installed, commissioned, operated and maintained in accordance with the
recommendations provided and accepted plumbing practices.
2. Periodic attention is given, as necessary, to maintain the product, the accessory ttings
and the plumbing system in good functional order.
In keeping with every other mechanical product, Rada Mixing Valves should not be considered
as functionally infallible and, as such will never totally replace the vigilance and attention of
maintenance, supervisory and safety staff. Provided that they are installed, commissioned,
operated and maintained, the risk of product failure and its associated consequences, if not
eliminated, are reduced to the minimum achievable.
Rada 32E Operating Specications
Maximum Hot Water Supply Temperature *70°C
Minimum Cold Water Supply Temperature 1°C
Minimum Flow Rate at mid blend with nominally equal supply pressures. 8 l/min
Maximum Flow Rate 120 l/min
Maximum Dynamic Inlet Supply Pressure (supplies must be nominally equal) 6.9 bar
MAximum Static Pressure 10 bar
Minimum Inlet Supply Pressures 2.7 bar Drench Shower
1.4 bar Eye Wash
Important! To ensure continued safe operation of this product, it should be checked and
maintained (see servicing and maintenance section). In addition All 'Critical Components'
must be changed every 5 years, irrespective of supply and usage conditions or the evidence
of in-service tests. However, when supply conditions or usage patterns do not conform to the
recommended operating parameters the cartridge may need to be replaced more frequently
in line with appropriate risk assessments.
Critical components are Cartridge Assembly pt. no. 1812.007 and inlet service pack 1847.232
or 1847.233 where applicable.
*Note! For optimum performance it is recommended that the maximum hot water temperature
is limited to 65°C.
Caution! During thermal disinfection the mixing valve can operate up to 85°C for short
periods ensure safety precautions are followed during discharge. Chemical disinfection agents
e.g. chlorine/chloramines combined with higher temperatures will affect the life of the product
adversely and could detrimentally affect the thermostatic performance, to ensure continued
safe operation refer to ‘Safety’ Critical components.
Andere Handbücher für 32E
1
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Kohler Sanitärprodukte Handbücher
Kohler
Kohler K-45210 Montageanleitung
Kohler
Kohler K-444 Montageanleitung
Kohler
Kohler Electric Shower Bedienungsanleitung
Kohler
Kohler Stanwell K-4972 Bedienungsanleitung
Kohler
Kohler K-7145 Montageanleitung
Kohler
Kohler K-45415 Montageanleitung
Kohler
Kohler K-1997 Montageanleitung
Kohler
Kohler sprig Bedienungsanleitung
Kohler
Kohler K-T15880 Bedienungsanleitung
Kohler
Kohler ALEUTIAN 31241T-8A Bedienungsanleitung
Kohler
Kohler Lyntier K-T10333 Montageanleitung
Kohler
Kohler K-4919 Bedienungsanleitung
Kohler
Kohler K-10272 Montageanleitung
Kohler
Kohler K-5329 Montageanleitung
Kohler
Kohler K-10121 Bedienungsanleitung
Kohler
Kohler K-8666X Bedienungsanleitung
Kohler
Kohler Fairfax K-12265 Montageanleitung
Kohler
Kohler K-10481 Bedienungsanleitung
Kohler
Kohler K-T395 Montageanleitung
Kohler
Kohler K-6331 Bedienungsanleitung
Beliebte Sanitärprodukte Handbücher anderer Marken
Weka
Weka 506.2020.00E Betriebsanleitung
UBERHAUS DESIGN
UBERHAUS DESIGN 75175017 Bedienungsanleitung
American Standard
American Standard DetectLink 6072121 Bedienungsanleitung
Uponor
Uponor Contec TS Bedienungsanleitung
Pfister
Pfister Selia 49-SL Bedienungsanleitung
Fortis
Fortis VITRINA 6068700 Bedienungsanleitung
