Kohler K-T15880 Bedienungsanleitung

Installation Guide

Deck/Rim Mount Bath Faucet Trim

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page“ Français-1”

Español, página“ Español-1”

K–T15880

1011145-2-B

Tools and Materials

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and website are listed on

the back cover. Thanks again for choosing Kohler Company.

Before You Begin

The valve is sold separately. Please read the instructions packed

with the valve for installation procedures.

Please read all instructions before you begin.

Shut off the main water supply.

Observe all local plumbing and building codes.

Complete the ﬁnished deck material before installing.

Before installation, unpack the new faucet trim and inspect it for

damage. Return it to the carton until installation.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Adjustable

Wrench • Rag

Plus:

Tube Cutter

Tape

Measure

Hex

Wrench Assorted

Screwdrivers

File

Plumbers

Putty

1011145-2-B 2 Kohler Co.

1. Remove the Pipe Plug

WARNING: Risk of personal injury. Lines may be pressurized.

Do not lean over the pipe plug when turning or removing the

plug.

Make sure the valves are closed (cold = fully counterclockwise;

hot = fully clockwise).

Turn off the main water supply.

Wrap a rag around the pipe plug to prevent water spray.

IMPORTANT! Water may purge from the supply tube when you

remove the plug.

Carefully remove the pipe plug.

Pipe Plug

Hot

Cold

Kohler Co. 3 1011145-2-B

2. Prepare for Spout installation

NOTE: Before installing the spout sleeve assembly, make sure the

O-ring is properly positioned in the groove on the outside of the

sleeve.

If the hole for anti-twist screw has not been created do so now.

Drill a hole using a 3/16″drill bit. The hole should be located

3/4″(1.9 cm) from the center of the spout hole.

Back off the setscrews in the spout sleeve assembly.

With a twisting motion, place the spout sleeve assembly over the

spout supply assembly and push down to the deck surface.

Align the sleeve with the setscrews offset from the center (not

facing directly forward or backward) of the supply tube.

Tighten the setscrews.

If the spout supply tube needs to be cut, cover the spout sleeve

assembly before cutting to prevent the chips from being lodged in

the O-ring.

Measure and cut off the supply tube 1/2” (1.3 cm) maximum

above the top of the spout sleeve assembly.

Remove all burrs from the supply tube to prevent damage to the

O-ring seal on the sleeve.

Uncover the spout sleeve assembly.

Carefully clean off any debris.

Purge the spout supply tube of debris.

O-Ring

Setscrews

Spout Sleeve

Assembly

3/4"

(1.9 cm)

Spout Supply

Tube

Anti-Twist

Screw Hole

Spout Supply

Tube

O-Ring

1/2"

(1.3 cm)

Max.

Spout Sleeve

Assembly

1011145-2-B 4 Kohler Co.

3. Install the Spout

CAUTION: Risk of product damage. Use care when installing

the spout assembly to prevent damage to the O-ring seal.

IMPORTANT! Keep the spout supply tube clean above the ﬁnished

deck to avoid damage to the O-ring seal.

Close the valves (hot = clockwise, cold = counterclockwise).

Apply a ring of plumbers putty or other sealant around the

underside of the spout base according to the manufacturer’s

instructions.

Position the spout base over the spout supply tube and slide

down. Align the anti-twist screw with the drilled hole.

Carefully press down until the spout contacts the ﬁnished deck.

Tighten the setscrew.

Setscrew

O-Ring

Spout

Supply

Tube

Spout

Sleeve

Assembly

Anti-Twist

Screw

Apply

plumbers

putty.

Kohler Co. 5 1011145-2-B

4. Install the Stem Adapters

Remove the plaster guards.

Close the valves (hot = clockwise, cold = counterclockwise).

Install a spline adapter to each valve stem.

Thread an escutcheon over each sidebody extension until it

bottoms out. Hand tighten.

Choose the appropriate size stem adapters based on the ﬁnished

deck/tile thickness. The sizes are as follows: small deck,0–1/4″

(6 mm), medium deck 1/4″(6 mm) – 3/4″(1.9 cm), and large

decks 3/4″(1.9 cm) – 1-1/4″(3.2 cm) thick. Use a small stem

adapter for rim and non-tiled deck applications.

Place the stem adapter into the sidebody extension and push it

down over the spline adapter. Position the stem adapters with the

rounded surface (″D″) positioned as shown.

To realign the stem adapters remove them, then remove and

rotate the spline adapter until the desired alignment is found.

Spline Adapter

Escutcheon

Small Stem

Adapter

Large Stem

Adapter

Medium Stem

Adapter

Small Stem Adapter

Escutcheon

Spline Adapter

Note Direction of "D" on

Stem Adapter

1011145-2-B 6 Kohler Co.

5. Install the Handles

Use a small screwdriver to place a retaining ring over the stem

adapters inside each sidebody extension.

Assemble euro, cross, stacked, and lever style handles by aligning

the ″D″shape of the valve stem and hole in handle.

For lever handles, ensure the O-ring is behind the threads.

Secure the handles with a screw.

6. Complete the Installation

Turn off the water (hot = clockwise, cold = counterclockwise).

Remove the aerator assembly.

Turn on the main water supply and check for leaks.

Turn on the hot and cold valves and run water through the spout

to remove debris. Check for leaks.

Turn off the hot and cold valves.

Reinstall the aerator assembly.

Escutcheon

Top View

Stem

Adapter

Sidebody

Extension

Retaining

Ring

Bonnet

Cross

ScrewScrew

Euro

Inset

Screw

Lever

O-Ring

Kohler Co. 7 1011145-2-B

Guide d’installation

Garniture robinet baignoire montage sur

comptoir/rebord

Outils et matériels

Merci d’avoir choisi la compagnie Kohler

Nous apprécions votre engagement envers la qualité Kohler. Veuillez

prendre s’il vous plaît quelques minutes pour lire ce manuel avant de

commencer l’installation. Ne pas hésiter à nous contacter en cas de

problème d’installation ou de fonctionnement. Nos numéros de

téléphone et notre adresse du site internet sont au verso. Merci encore

d’avoir choisi la compagnie Kohler.

Avant de commencer

La valve est vendue séparément. Veuillez s’il vous plaît lire les

instructions d’installation emballées avec la valve.

Veuillez lire toutes les instructions avant de commencer.

Couper l’alimentation d’eau principale.

Respecter tous les codes de plomberie et de bâtiment locaux.

Compléter le matériau du comptoir ﬁni avant d’installer.

Avant l’installation, déballer la garniture du nouveau robinet et

l’examiner pour en déceler tout dommage. Remettre le robinet

dans l’emballage jusqu’à l’installation.

Cléà

molette • Chiffon

Plus:

Coupe-tubes

Mètre

ruban

Clé

hexagonale Tournevis

assortis

Lime

Mastic de

plombier

Kohler Co. Français-1 1011145-2-B

Avant de commencer (cont.)

Kohler Co. se réserve le droit d’apporter toutes modiﬁcations au

design des robinets et ceci sans préavis, comme spéciﬁé dans le

catalogue des prix.

Kohler Co. Français-2 1011145-2-B

1. Retirer le bouchon du tube

AVERTISSEMENT : Risque de blessure corporelle. Les

canalisations peuvent être pressurisées. Ne pas se pencher sur le

bouchon du tube au moment de le tourner et de le retirer.

S’assurer que les robinets soient fermés (côté froid complètement

vers la gauche, côté chaud complètement vers la droite).

Fermer l’alimentation d’eau principale.

Enrouler une serviette autour du bouchon du tube pour

empêcher l’eau de gicler.

IMPORTANT ! L’eau pourrait s’écouler du tube d’alimentation

d’eau lorsque le bouchon est retiré.

Retirer le bouchon de tuyau avec précaution.

Bouchon

du tuyau

Fermer l'eau

chaude

Fermer

l'eau froide

1011145-2-B Français-3 Kohler Co.

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-18865 Bedienungsanleitung

Kohler

Kohler K-T9474 Bedienungsanleitung

Kohler

Kohler 74036T-4E2 Bedienungsanleitung

Kohler

Kohler 9076 Bedienungsanleitung

Kohler

Kohler K-4108BR Bedienungsanleitung

Kohler

Kohler K-7825 Bedienungsanleitung

Kohler

Kohler KUMIN 18655T-CP Bedienungsanleitung

Kohler

Kohler CUFF 45532M Bedienungsanleitung

Kohler

Kohler Coralais K-15177 Bedienungsanleitung

Kohler

Kohler K-922 Bedienungsanleitung

Kohler

Kohler K-T16236 Bedienungsanleitung

Kohler

Kohler K-6227 Montageanleitung

Kohler

Kohler 1152813-A2-A Bedienungsanleitung

Kohler

Kohler Rainduet R97009T Bedienungsanleitung

Kohler

Kohler Mira Event XS Bedienungsanleitung

Kohler

Kohler Finial 607T Bedienungsanleitung

Kohler

Kohler 97345IN-4 Series Bedienungsanleitung

Kohler

Kohler K-1002-H2 Bedienungsanleitung

Kohler

Kohler K-1124-G Kurzanleitung

Kohler

Kohler K-4761 Bedienungsanleitung

Kohler

Kohler Antique K-100 Montageanleitung

Kohler

Kohler STEWARD ECO Bedienungsanleitung

Kohler

Kohler K-5329 Montageanleitung

Kohler

Kohler K-72218 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung