Kohler Mira Sport J03A Bedienungsanleitung

1 1493623-W2-A

These instructions must be left with the user

Mira Sport

7.5, 9.0, 9.8 and 10.8 kW

Installation and User Guide

For SPARES,

ADVICE or REPAIRS

please call us free

on 0800 001 4040

(UK only)

21493623-W2-A

WARNING - This shower can deliver scalding temperatures, cause

re, electric shock or other personal injury if not operated, or

maintained in accordance with the instructions, warnings and

cautions contained in this guide and on the appliance.

Please read the important safety information and the operation section

of this guide before using the shower. Failure to follow the instructions

provided with this shower will invalidate the guarantee.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. Children younger than 3 years should not use this shower. Children

3 years to under 8 years should only use this shower under

continuous supervision. Children aged 8 years and above and

persons with reduced physical, sensory or mental capabilities or

lack of experience or knowledge can use the shower if they are

given supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

2. Children shall not be allowed to play with the shower.

3. DO NOT restrict the water ow from the shower outlet, temporarily

bending the shower hose or blocking the shower head while in use

can cause a hot shot of water to be discharged.

4. Cleaning and user maintenance shall not be made by children

without supervision.

5. The outlet must not be connected to any tap or tting other than

those specied.

6. The showerhead must be descaled regularly. Any blockage of the

showerhead or hose can cause damage to the shower.

7. Warning! DO NOT switch on if there is a possibility that the water

in the heater is frozen.

8. The shower must be provided with means for local disconnection

from the supply mains having a contact separation in all poles

that provide full disconnection under overvoltage category III,

the instructions state that means for disconnection must be

incorporated in the xed wiring in accordance with the wiring rules.

Important Safety Information

3 1493623-W2-A

9. Installation of the shower must be carried out in accordance with

these instructions by qualied, competent personnel. Read all

instructions before installing the shower.

10.DO NOT switch the shower on if water starts leaking from the shower

case. Isolate the electrical supply to the shower immediately.

11.DO NOT switch the shower on if the case appears to be damaged

or incorrectly tted. Isolate the electrical supply to the shower

immediately.

12.DO NOT increase the power setting or adjust the temperature

control rapidly while using the shower.

13.DO NOT switch the shower o󰀨 and back on while standing in the

water ow.

14.DO NOT change the handset model. Fit only shower heads

recommended by Mira and do no t any additional device to restrict

the water outlet ow.

15.When adjusting the handset mode, point handset away from body

and make sure that the water temperature has stabilised before

continuing to shower.

16.Use caution when altering the water temperature, always check

the temperature before continuing to shower.

17. Switch the shower o󰀨 at the electrical isolating switch when not in

use. This is recommended with all electrical appliances.

18.Installation of the shower must be carried out in accordance with

these instructions by qualied, competent personnel. Read all

instructions before installing the shower.

19.Isolate the electrical and water supplies before commencing

installation. The electricity must be isolated at the consumer unit

and the appropriate circuit fuse removed, if applicable. Mains

connections are exposed when the cover is removed.

20.DO NOT install the shower in areas with high humidity and

temperature (i.e. Steam rooms and saunas).

21.DO NOT install the shower where it may be exposed to freezing

conditions. Ensure that any pipework that could become frozen is

properly insulated.

41493623-W2-A

22.DO NOT connect the outlet of the shower to any tap, control valve,

trigger operated handset or showerhead other than those specied

for use with this shower as the outlet acts as a vent for the tank

body. Only Kohler Mira recommended accessories should be used.

23.DO NOT perform any unspecied modications, or drill or cut holes

in the product other than instructed by this guide. When servicing

only use genuine Kohler Mira replacement parts.

24.DO NOT connect this shower to a Waste Water Heat Recovery

System as this may cause unstable or scalding temperatures to

be delivered from the shower head.

25.Always check the water temperature is safe before entering the

shower.

26.The water supplies to this product must be isolated if the product is

not to be used for a long period of time. If the product or pipework

is at risk of freezing during this period they should also be drained

of water.

27.If the shower is dismantled during installation or servicing then,

upon completion, an inspection must be made to ensure all

electrical connections are tight and that there are no leaks.

28.This appliance is intended to be permanently connected to the

water mains and not connected by a hose set.

29.The water inlet of this appliance shall not be connected to a water

supply obtained from any other water heating system.

30.Warning! This appliance is not to be used to provide a potable

water supply.

31.Maximum Static Pressure is 1000 kPa (10 bar).

32.Minimum Dynamic Pressure is 70kPa (0.7 bar) 7.5 kW, 9.0 kW

and 9.8 kW; 100kPa (1.0 bar) 10.8 kW.

5 1493623-W2-A

Pack Contents

Tick the appropriate boxes to familiarize yourself with the part names and to conrm

that the parts are included.

Documentation

1 x Electric Shower

2 x Case Inserts

1 x Installation Guide and User Guide

1 x Installation Template

1 x Compression Nut

1 x Olive

1 x Guarantee Brochure

61493623-W2-A

Wiring Diagram

Internal Wiring Diagram

Inlet Connector

Terminal

Block

Heater

Tank

Micro

Switch (L)

Micro

Switch (R)

Solenoid

LED/LED

Housing

Push Button

Switch

BROWN B

GREEN D

BLUE C

RED K

BROWN J

BROWN G

BLACK M

BLACK L

RED H

BLUE E

BROWN F

BLUE E

BLACK N

GREEN A GREEN A

GREEN D

7 1493623-W2-A

Design Registration: 001259 287-0002, 001259 287-0005

Patents: GB: 2 341 667, 2 427 460

Ireland: 82835

Patent Application: Ireland: 2006/0462

Thank you for purchasing a quality Mira Sport Electric Shower. To enjoy the full

potential of your new shower, please take time to read this guide thoroughly, and

keep it handy for future reference.

Products manufactured by Kohler Mira Ltd are designed to be safe provided, that

they are installed used and maintained in good working order, in accordance with

our instructions and recommendations.

Follow all warnings, cautions and instructions contained in this guide, and on or

inside the shower.

Mira Sport electric showers have separate controls for power selection and for

temperature/ow adjustment. A unique ow regulator stabilises any temperature

changes caused by water pressure uctuations, which can result from taps being

turned on or o󰀨 or toilets being ushed.

Domestic Light Commercial 

Heavy Commercial Healthcare 

Product Variant Model No. Colour

Mira Sport 7.5 kW J03A White/Chrome

Mira Sport 9.0 kW J03B White/Chrome

Mira Sport 9.8 KW J03C White/Chrome

Mira Sport 10.8 KW J03D White/Chrome

Introduction

Products Covered

Recommended Usage

Patents and Design Registration

81493623-W2-A

Specications

Plumbing Variant

7.5 9.0 9.8 10.8

Minimum Dynamic Pressure 70 kPa (0.7

bar)

70 kPa (0.7

bar)

70 kPa (0.7

bar)

100 kPa (1.0

bar)

Maximum Dynamic Pressure* 500 kPa (5.0 bar)

Maximum Static Pressure* 1000 kPa (10 bar)

Minimum Static Pressure 20 kPa (0.2 bar)

Maximum Inlet Temperature 30°C

Minimum Inlet Temperature 2°C

Inlet Connection 15 mm Compression/1/2” BSP Male

Maximum Water Hardness 200 ppm CaCO3

Outlet Connection 1/2” BSP Male

Electrical Variant

7.5 9.0 9.8 10.8

Nominal Power at 240 V ac 7.5 kW 9.0 kW 9.8 kW 10.8 kW

Nominal Power at 230 V ac 6.9 kW 8.3 kW 9.0 kW 9.9 kW

Recommended MCB Rating 32 A 40A 45A 45A

Maximum Supply Cable Size 16 mm²

Recommended RCD Rating 30 mA tripping current

Recommended Isolator Switch 45 A double-pole with 3 mm contact separation

Appliance Sealing Rating IP X4 - Suitable for installation in Zone 1

Maximum Ambient

Temperature

30°C

Minimum Ambient

Temperature

2°C

Dimensions

Height 358 mm

Width 215 mm

Depth 90 mm

*A drop tight pressure reducing valve should be installed where dynamic or static pressure exceeds the

gure stated in the Specications.

9 1493623-W2-A

This product has been designed for domestic use only, Mira Showers guarantee this

product against any defect in materials or workmanship for a period of two years

from the date of purchase (shower ttings for one year).

For terms and conditions, refer to the back cover of this guide.

Guarantee

European Conformity Information

This range of electric showers complies with the following European directives:

2014/35/EU - Low Voltage Directive (LVD),

2014/30/EU - Electromagnetic Compatibility Directive (EMC),

2011/65/EU - Restriction of Hazardous Substances Directive (RoHS)

This range of electric showers are high power appliances and are subject to

conditional connection. If the main electrical supply fuse is rated less than 80 Amps,

the local electricity supply company must be contacted to conrm if the electrical

supply is adequate.

This range of showers complies with the requirements of the UK’s water regulations.

Disposal and Recycling

End of Product Life

Electrical and electronic devices contain a range of materials that can be separated

for recycling and used in new products.

This product should not be disposed of with your general household

waste. When this product has reached the end of its serviceable life,

please remove any batteries and take it to a recognised WEEE (Waste

Electrical and Electronic Equipment) collection facility such as your local

civic amenity site for recycling.

Your local authority or retailer will be able to advise you of your nearest recycling

facility.

101493623-W2-A

Installation Requirements

Plumbing

1. The plumbing installation must comply with all national or local water regulations

and all relevant building regulations, or any particular regulation or practice

specied by the local water supply company.

2. DO NOT use sealing compounds on any pipe tting or joints.

3. DO NOT install the product in a position in which service access is limited.

4. Decide on a suitable position for the shower (minimum distance of 200 mm from

the ceiling to allow for cover t and removal).

5. The position of the shower and shower ttings must provide a minimum gap of

25 mm between the showerhead and the spill over level of any bath, shower

tray or basin and a minimum gap of 30 mm between the showerhead and the

spill over level of any toilet, bidet or other appliance with a Fluid Category 5

backow risk (see diagram on page 11).

6. The shower is suitable for installation within the shower area and is tted with

a pressure relief valve. It must be positioned over a water catchment area with

the controls at a convenient height for the user.

7. The shower must be tted to a waterproof at and even wall surface.

8. DO NOT t the shower to the wall and tile up to the case.

9. DO NOT seal the gap between the shower and the wall surface.

10. The showerhead should be positioned so that it discharges down the centre

line of the bath or across the opening of a shower cubicle.

11. The showerhead must be directed away from the shower unit, during normal

use the showerhead must not spray directly on to the shower unit.

12. DO NOT apply excessive force to plumbing connections; always provide

mechanical support when making plumbing connections. Any soldered joints

should be made before connecting the shower.

13. This shower is not designed to be plumbed directly from the rear. For rear-entry

supply, add an elbow to the supply pipe and connect as a rising or a falling

supply.

14. If pipework and/or electrical cables enter the shower from the rear through a

hole in the wall provision must be made to prevent water ingress back into the

wall structure.

15. Only use the inlet connector supplied with the shower. DO NOT use any other

type of tting.

16. A full bore/non restrictive servicing valve must be tted in a readily accessible

position adjacent to the shower to facilitate maintenance of the shower.

DO NOT use a valve with a loose washer plate (jumper) as this can lead to a

build up of static pressure.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler MINIMA K-45803T-L-SHP Bedienungsanleitung

Kohler

Kohler K-302 Bedienungsanleitung

Kohler

Kohler 99721T-4 Bedienungsanleitung

Kohler

Kohler K-6854 Montageanleitung

Kohler

Kohler 7098M Bedienungsanleitung

Kohler

Kohler K-146 Montageanleitung

Kohler

Kohler Fairfax K-12265 Montageanleitung

Kohler

Kohler K-3422 Bedienungsanleitung

Kohler

Kohler Stargaze BubbleMassage K-1959-GHW Bedienungsanleitung

Kohler

Kohler NEW MEMOIRS K-76555T Bedienungsanleitung

Kohler

Kohler COMPOSED K-25421T Bedienungsanleitung

Kohler

Kohler K-20199 Montageanleitung

Kohler

Kohler K-8247 Montageanleitung

Kohler

Kohler K-7397 Bedienungsanleitung

Kohler

Kohler K1044435 Handbuch

Kohler

Kohler 17493W-CP Bedienungsanleitung

Kohler

Kohler K-2277 Montageanleitung

Kohler

Kohler K-5293 Bedienungsanleitung

Kohler

Kohler K-1257P Kurzanleitung

Kohler

Kohler K-5834 Montageanleitung

Kohler

Kohler K-13132 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Kohler

Kohler CORALAIS K-15290 Bedienungsanleitung

Kohler

Kohler K-22066-BL Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung