Kohler K-110 Bedienungsanleitung

Installation Guide

Deck/Wall-Mount Bath Faucet

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page “Français-1”

Español, página “Español-1”

K-110 K-331

K-6905 K-16210

1008209-2-G

Tools and Materials

Before You Begin

WARNING: Risk of personal injury. This product is not

designed or intended for use as a grab or support bar. Do not

install in a location where this product may be inadvertently

used as a grab or support bar.

Please read all instructions before you begin.

Observe all local plumbing and building codes.

Shut off the main water supply.

Inspect the waste and supply tubing and replace as needed.

Install or relocate the supplies as necessary to conform to the

roughing-in dimensions.

This faucet can be installed in freestanding, deck-mount or wall

mount conﬁgurations. Follow only the instructions that apply to

your installation.

An optional wall-mount bracket is available to adapt the

handshower to a stationary location.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Propane

Torch

Plus:

• Adjustable Arc Pliers

• 1/2" Piping

• Threaded 1/2" Adapters

• 1/2" Union Elbows

• Bath Shower Ells

• K-6525 Wall-Mount Bracket

Assorted

Screwdrivers

Solder

Thread

Sealant Strap

Wrench

Adjustable

Wrench

Assorted Hex

Wrenches

Drill and

Bits

Level

1008209-2-G 2 Kohler Co.

Roughing-In

Roughing-In Dimensions-

Wall-Mount Kit

Roughing-In Dimensions-

Free-Standing and Deck-Mount

Bath drain to faucet

Bath Models

K-100

K-700, K-702

K-710, K-711, K-712, K-726, K-727

1/2"

NPT

1/2"

NPT

Top of Rim

(10.2 cm)

(10.2 cm) Min

2-1/4"

(5.7 cm) D.

2-7/16"

(6.2 cm)

2-1/4"

(5.7 cm) D.

8-15/16"

(22.7 cm) D.

1-1/8"

(2.9 cm) D.

K-126, K-127

27-7/8"

(70.8 cm)

K-128

31-1/2"

(80 cm)

9-5/8"

(24.4 cm)

9-5/8"

(24.4 cm)

5-5/8"

(14.3 cm)

1-13/16"

(4.6 cm)

1-13/16"

(4.6 cm)

2-3/8"

(6 cm)

11-3/8"

(28.9 cm)

2-3/8"

(6 cm)

5-5/8"

(14.3 cm)

8-15/16"

(22.7 cm)

3" (7.6 cm) Min

4-1/4" (10.8 cm) Max

K-101

5-7/8" (14.9 cm)

6-3/8" (16.2 cm)

4-3/8" (11.1 cm)

Kohler Co. 3 1008209-2-G

1. Prepare the Site

If not already installed, install or relocate the water supplies as

needed to conform to the roughing-in dimensions for your

particular installation.

Use thread sealant on all the threaded connections.

2. Freestanding Supply Installation

Remove the temporary plugs from the water supply couplings.

Replace the long rod with the short rod for Kohler models

K-710, K-711, K-712, K-726 and K-727. To determine the bath to

drain faucet measurement for your model bath refer to the

″Roughing-In″section of this manual.

Thread the tee bracket into the hole in the back of the overﬂow

elbow.

Insert the rod into the tee bracket and secure with the setscrew.

Install the Supply Tubes

Loosen the setscrews in the pipe holder and ﬂange.

Carefully slide the plated supply pipe through the pipe holder

and ﬂange.

Thread the supply pipe into the supply rough-in and tighten it

with a strap wrench.

Tighten the setscrews in the pipe holder and ﬂange.

Rod

Setscrew

Pipe

Holder

Tee

Bracket

Overflow

Elbow

Plated Supply Pipe

Setscrew

Pipe

Holder

Tee Bracket

Flange

1008209-2-G 4 Kohler Co.

Freestanding Supply Installation (cont.)

Repeat for the second supply tube.

Kohler Co. 5 1008209-2-G

3. Deck-Mount Supply Installation

Remove the temporary plugs from the water supply couplings.

Construct a frame for the deck with two 1″(2.5 cm) holes

measuring 8″(20.3 cm) apart from the center of each hole.

Carefully slide the plated supply pipe through the holes.

Thread the supply pipe into the supply rough-in and tighten with

a strap wrench.

Securely strap the supply pipes to the framing below the bath

deck.

Loosen the setscrew in the ﬂange.

Carefully slide the ﬂange down the supply pipe so it rests on the

bath deck.

Tighten the ﬂange setscrew.

8" (20.3 cm) Center-to-Center

1" (2.5 cm) Diameter Holes

Plated

Supply

Pipe

Setscrew

Flange

1008209-2-G 6 Kohler Co.

4. Freestanding and Deck-Mount Faucet Installation

Carefully slip the O-ring into the groove in the plug button.

Press the plug button into the hole in the back of the cradle.

Apply thread sealant to the threads of the plated supply pipes.

Slide a nut onto one of the plated supply pipes. Be careful to

avoid scratching the plated ﬁnish.

Thread the ﬂanged union onto the supply pipe. Verify that the

ﬂanged union is level.

Set the washer on top of the ﬂanged union.

Repeat for the other supply pipe.

Set the spout assembly on both washers.

Thread the nuts up onto the spout assembly to secure it to the

supply tubes.

Plug

Button

O-Ring

Spout

Assembly

Flanged

Union

Plated

Supply Pipe

Nut

Washer

Cradle

Kohler Co. 7 1008209-2-G

5. Wall-Mount Supply Installation

Determine the faucet installation location.

Install support framing at the installation location as shown.

Secure the piping to the framing.

Install temporary plugs in the supply ells.

Turn on the water supplies and check for leaks.

Turn off the water supplies.

Complete the ﬁnished wall.

In the ﬁnished wall, drill two 1″(2.5 cm) holes measuring 8″

(20.3 cm) apart from the center of each hole.

Drill a 1/2″(1.3 cm) hole at the exact location illustrated. This

hole must be through the plywood support.

Remove the temporary plugs from the water supply ells.

Support

Framing

1/2"

Copper

Tubing

Minimum 1/2"

Plywood

Supply Ells

11-3/8"

(28.9 cm)

11-3/8"

(28.9 cm)

This hole must be centered,

and must be through

plywood support.

1" (2.5 cm) Diameter Holes

8" (20.3 cm)

Center-to-Center

1/2" (1.3 cm)

Diameter Holes

1008209-2-G 8 Kohler Co.

6. Wall-Mount Elbow Installation

Loosen the ﬂange setscrews.

Carefully slide a ﬂange onto one of the plated elbows. Be careful

to avoid scratching the plated ﬁnish.

Apply thread sealant to the threads of the plated elbows.

Insert one of the plated elbows through the wall and into a

supply ell.

Thread the plated elbow into the supply ell and tighten with a

clean strap wrench. Position the plated elbows with the opening

facing up.

Carefully slide the ﬂange over the plated elbow and up against

the ﬁnished wall.

Tighten the ﬂange setscrew.

Repeat for the other plated elbow.

Apply thread

sealant here.

Setscrew

Flange

Plated Elbow

Kohler Co. 9 1008209-2-G

7. Wall-Mount Support Installation

Pivot the metal anchor channel so the plastic straps touch.

Insert the channel into the 1/2″(1.3 cm) hole in the ﬁnished wall.

Pull on the strap ring until the metal anchor channel is ﬂush on

the inside of the ﬁnished wall.

Slide the plastic cap along the straps until it is ﬂush with the

wall.

Break the straps off ﬂush with the ﬁnished wall.

Insert the screw through the support ﬂange.

Thread the screw and support ﬂange into the anchor. Securely

hand tighten.

Loosely thread the support bolt completely into the support

ﬂange.

Install the Anchors

Anchor Hole

Anchor Channel

Loop Clip

Strap Loop

Screw

Anchor

Support

Flange

Support

Bolt

1008209-2-G 10 Kohler Co.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-7147T Bedienungsanleitung

Kohler

Kohler 8002A Bedienungsanleitung

Kohler

Kohler K-45415 Montageanleitung

Kohler

Kohler K-2220X Montageanleitung

Kohler

Kohler K-8973 Montageanleitung

Kohler

Kohler K-19321T Bedienungsanleitung

Kohler

Kohler Mira Zest Bedienungsanleitung

Kohler

Kohler K-2419 Montageanleitung

Kohler

Kohler Reve K-5036BR Bedienungsanleitung

Kohler

Kohler K-T14412 Bedienungsanleitung

Kohler

Kohler 24811A-0 Installationsanleitung

Kohler

Kohler K-8816 Bedienungsanleitung

Kohler

Kohler BodySpa K-1030 Montageanleitung

Kohler

Kohler Archer VibrAcoustic K-2595-VBW Bedienungsanleitung

Kohler

Kohler K-15003 Bedienungsanleitung

Kohler

Kohler Revival K-2950-1/8 Bedienungsanleitung

Kohler

Kohler K-470 Montageanleitung

Kohler

Kohler K-7166-AF Montageanleitung

Kohler

Kohler K-856 Kurzanleitung

Kohler

Kohler Kathryn K-2322 Montageanleitung

Kohler

Kohler K-393 Bedienungsanleitung

Kohler

Kohler K-7744 Bedienungsanleitung

Kohler

Kohler Symbol Rite-Temp K-T18488 Bedienungsanleitung

Kohler

Kohler K-9310X Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung