Kohler K-3393 Montageanleitung

Homeowners Guide

Toilets

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page “Français-1”

Español, página “Español-1”

K-3393

1057478-5-C

IMPORTANT INFORMATION

SAVE THESE INSTRUCTIONS

WARNING: Risk of injury or water damage. Contents of

vessel under pressure can cause severe injury. Do not open or

service before reading service instructions. Turn off water

supply and ﬂush the unit to release pressure before

attempting any service.

WARNING: Risk of injury or product damage. Handle

vitreous china products very carefully. Vitreous china can

break and chip if you overtighten bolts and nuts.

CAUTION: Risk of product damage. Do not use any oils or

lubricants on the system.

CAUTION: Risk of product damage. The ﬁttings in this

toilet require no adjustment (except for possible gap clearance

adjustment and winterizing). The ﬁttings in this toilet are

preset. Any adjustment or modiﬁcations of the product are

not normal usage and void the warranty.

NOTICE: For service and warranty on the Sloan Flushmate® vessel

and related components, see the Sloan Flushmate Owner’s Service

Manual.

Follow all local plumbing codes.

Thank You For Choosing Kohler Company

Thank you for choosing the Bold Look of Kohler. Kohler craftsmanship

offers you a rare combination of proven performance and graceful

sophistication that will satisfy you for years to come. The

dependability and beauty of your Kohler product will surpass your

highest expectations. We’re very proud of our products here at Kohler

and we know you will be too.

Please take a few minutes to study this Homeowners Guide. Pay

special attention to the care and cleaning instructions.

All information in this manual is based upon the latest product

information available at the time of publication. At Kohler, we

constantly strive to improve the quality of our products. We reserve

the right to make changes in product characteristics, packaging or

availability at any time without notice.

1057478-5-C 2 Kohler Co.

Your Kohler Toilet

Your Kohler toilet combines outstanding function, comfort, and

performance with remarkable style and class.

Crafted from a clay mixture that is ﬁred at an intense heat to vitrify

the clay and fuse the glaze, your Kohler toilet is scratch- and

abrasion-resistant. Its surface will not stain, discolor, rust, or fade.

Every component in your Kohler toilet is speciﬁcally designed to

increase the toilet’s useful life.

How to Use This Manual

This manual is designed to help you troubleshoot and repair any

problems that may develop with the operation of the toilet. If a

problem occurs:

Refer to the Troubleshooting section to determine a probable

cause.

Follow the instructions in this manual to correct the problem.

Check the Service Parts section to determine the part numbers for

any replacement parts necessary.

Use the information on the back cover of this manual to contact

Kohler Company to order parts, or for help if you cannot correct

the problem.

Kohler Co. 3 1057478-5-C

Theory of Operation

Operating Features

Your Kohler toilet is a one-piece toilet that ﬂushes completely and

efficiently using only a small quantity of water. The operating system

uses an electric, motorized pump to create a thorough ﬂush. The long

trip button selects a trip time that is adequate for heavy loads. An even

shorter ﬂush, and less quantity of water is used when the short trip

button is used for light loads.

The operating system consists of the following basic component

groups:

The vitreous china bowl and tank, which directs the ﬂushing

water ﬂow and houses the system.

The pump, which houses the motor, electronic controls, and

impeller.

The ﬁll valve, which reﬁlls the tank to the correct water line and

sends water to the bowl to establish proper trap seal depth after

each ﬂush.

The trip button which initiates the ﬂush and reﬁll process. The

selected button determines how much water is ﬂushed through

the bowl.

Long Flush

Water Flow

Float

Water Line

Fill Valve

Water Flow

Rim Supply

Hose

Bowl Supply

Hose

Pump Flush

Assembly

Fill Valve

Assembly

Short Flush

Trip

Button

Refill Tube Water Flow

Trip Button

1057478-5-C 4 Kohler Co.

Theory of Operation (cont.)

Flush Cycle

The ﬂush cycle consists of the following steps:

When either trip button is pressed, an electronic signal is sent to

the circuit board (which is safely housed within the pump).

This triggers a timing sequence that turns on the pump motor for

a speciﬁc length of time. The length of time depends upon which

trip button was pressed. The pump runs longer for a long ﬂush.

The pump sends pressurized water to the front jet and rim

through the connecting hoses.

This initiates the siphon action in the bowl, and thoroughly

ﬂushes the side walls.

As the water in the tank lowers during the pumping action, the

ﬁll valve ﬂoat drops.

This turns on the ﬁll valve to reﬁll the tank.

While the tank is ﬁlling, water is also sent through the reﬁll tube

to return the bowl to the proper trap seal level.

After the pump turns off, the ﬁll valve continues sending water to

both the tank and bowl (through the reﬁll tube).

The ﬁll valve turns off when water reaches the proper water line

in the tank.

Safety Features

Your Kohler toilet combines outstanding function, comfort, and

performance with remarkable style and class. It contains the following

speciﬁc safety features:

Your toilet exceeds ASME performance standards for

low-consumption toilets.

It was designed with a large glazed trapway to keep waste

moving without blockage.

Your Kohler toilet is scratch and abrasion-resistant. It is crafted

from a clay mixture that is ﬁred at an intense heat to vitrify the

clay and fuse the glaze. Its surface won’t stain, discolor, rust, or

fade. Every component in your Kohler toilet is speciﬁcally

designed to increase the toilet’s useful life.

Kohler Co. 5 1057478-5-C

Safety Features (cont.)

The pump and toilets are listed by Underwriter’s Laboratory (UL)

for safety. The ﬁll valve is approved by International Association

of Plumbing and Mechanical Officials (IAPMO) for use in this

system.

The pump motor and circuit board are sealed in a housing

separate from the impeller (which propels the water). The motor

turns the impeller by a magnetic coupling. This ensures a

separation between the impeller and the motor with electronic

controls. There are no gaskets or O-rings that can wear out and

allow water to leak into the motor compartment.

Your new toilet is designed to be ﬂushed once every 70 seconds.

This feature assures adequate time for the tank to ﬁll with water

and provides consistent operation of the motor. However, a

second ﬂush can be made 35 seconds after the ﬁrst ﬂush. If you

activate the second ﬂush at this interval, you must wait 105

seconds to activate a third ﬂush. If you attempt a third ﬂush

before the 105 seconds have elapsed, the toilet will not ﬂush. This

is normal operation.

An overﬂow slot between the tank and bowl allows water to

drain into the bowl and out the trapway if the water level in the

tank becomes too high.

Care and Cleaning

WARNING: Risk of property or product damage. Do not use

in-tank cleaners in your toilet. Products containing chlorine

(calcium hypochlorite) can seriously damage ﬁttings in the

tank. This damage can cause leakage and property damage.

Kohler Co. shall not be responsible or liable for any tank ﬁtting

damage caused by the use of cleaners containing chlorine (calcium

hypochlorite).

For best results, keep the following in mind when caring for your

KOHLER product:

•Use a mild detergent such as liquid dishwashing soap and warm

water for cleaning. Do not use abrasive cleaners that may scratch

or dull the surface.

•Carefully read the cleaner product label to ensure the cleaner is

safe for use on the material.

•Always test your cleaning solution on an inconspicuous area

before applying to the entire surface.

1057478-5-C 6 Kohler Co.

Care and Cleaning (cont.)

•Do not allow cleaners to sit or soak on the surface.

•Wipe surfaces clean and rinse completely with water immediately

after cleaner application. Rinse and dry any overspray that lands

on nearby surfaces.

•Use a soft, dampened sponge or cloth. Never use an abrasive

material such as a brush or scouring pad to clean surfaces.

•For Artist Edition Toilets: Gold and Platinum used on decorative

products are like ﬁne jewelry. Use only warm water to clean, and

dry with a soft cloth.

For detailed cleaning information and products to consider, visit

www.kohler.com/clean. To order Care & Cleaning information, call

1-800-456-4537 and press 1 for Kohler Products and then 3 for

Literature.

Kohler Co. 7 1057478-5-C

Unplugging the Fill Valve

Shut off the water supply.

Unplug the electrical plug for the toilet from the outlet.

Remove the tank cover.

Remove the ﬁll valve arm assembly by rotating it 1/8 turn

counterclockwise.

NOTE: Hold the cup ﬁrmly as the water pressure may be high.

Cover the uncapped ﬁll valve body opening with an inverted cup

in order to prevent water spray.

Turn the water supply on and off a few times in order to ﬂush

out any blockage.

Shut off the water supply.

Use a damp cloth or sponge to remove any residue on the seal

diaphragm.

Replace the ﬁll valve arm assembly and engage the lugs.

Rotate 1/8 turn clockwise.

Replace the tank cover.

Turn the water on.

Plug the electrical cord for the toilet into the outlet.

Test the toilet for proper operation.

SealDiaphragm

Fill Valve Body

Float

Lug

Float

Elevation

Screw

Fill Valve Arm

Assembly

Cover here to

prevent overspray.

1057478-5-C 8 Kohler Co.

Removing Fill Valve Components

Remove the Fill Valve Assembly Leaving Fill Valve Riser in Place

Perform the following steps in order to remove only the ﬁll valve

assembly:

Shut off the water supply.

Unplug the electrical plug for the toilet from the outlet.

Remove the tank cover.

Remove the reﬁll tube from the ﬁll valve assembly.

Grasp the blue coupling at the riser and turn it counterclockwise

1/8 turn.

Gently pull the ﬁll valve assembly clear of the coupling.

Remove the Fill Valve Assembly Including the Fill Valve Riser

Perform the following steps to remove the ﬁll valve including the riser:

Shut off the water supply.

Unplug the electrical plug for the toilet from the outlet.

Remove the tank cover.

Remove the reﬁll tube from the ﬁll valve assembly.

Remove the supply tubing, supply nut, washer, and locknut from

below the tank.

Tube

Coupling

Fill Valve

Assembly

Refill

Tube

Fill Valve

Riser

Tube

Fill Valve

Assembly

Refill

Tube

Fill Valve

Riser

Coupling

Kohler Co. 9 1057478-5-C

Removing Fill Valve Components (cont.)

Gently remove the ﬁll valve and ﬁll valve riser assembly.

If required, remove the washer from the bottom of the tank.

1057478-5-C 10 Kohler Co.

Andere Handbücher für K-3393

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler NEW MEMOIRS K-76555T Bedienungsanleitung

Kohler

Kohler K-1257P Kurzanleitung

Kohler

Kohler Memoris 10435T Bedienungsanleitung

Kohler

Kohler K23857-CP Bedienungsanleitung

Kohler

Kohler K-T309 Bedienungsanleitung

Kohler

Kohler Centerset K-15241 Montageanleitung

Kohler

Kohler K-1997 Montageanleitung

Kohler

Kohler TOUCHLESS 32323T-4 Bedienungsanleitung

Kohler

Kohler Mira 1836.457 Bedienungsanleitung

Kohler

Kohler K-15635 Bedienungsanleitung

Kohler

Kohler RiverBath Quadrangle K-1365-H2 Bedienungsanleitung

Kohler

Kohler K-7980 Montageanleitung

Kohler

Kohler MAXISPACE K-77217T Bedienungsanleitung

Kohler

Kohler Cachet Quiet-Close K-7671 Bedienungsanleitung

Kohler

Kohler K-18829 Montageanleitung

Kohler

Kohler K-R99252X-4CD Montageanleitung

Kohler

Kohler K-470 Montageanleitung

Kohler

Kohler MODULO 99960T-4V Bedienungsanleitung

Kohler

Kohler MOXIE 99107T Bedienungsanleitung

Kohler

Kohler K-8855 Bedienungsanleitung

Kohler

Kohler ESCALE K-19611T Bedienungsanleitung

Kohler

Kohler K-349 Montageanleitung

Kohler

Kohler SKYLINE Series Bedienungsanleitung

Kohler

Kohler K-10217 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung