Kohler Mira Sport Thermostatic Bedienungsanleitung

These instructions must be left with the user

Installation Guide

Mira Sport Thermostatic

9.0 & 9.8 kW

For SPARES, ADVICE

or REPAIRS

Please call us on

0844 571 5000

(UK Only)

If you experience any difculty with the installation of your new shower, then please

refer to “Fault Diagnosis”, before contacting Kohler Mira Limited. Our telephone

and fax numbers can be found on the back cover of this guide.

INTRODUCTION

Thank you for purchasing a quality Mira Sport Thermostatic Electric Shower. To enjoy

the full potential of your new shower, please take time to read this guide thoroughly,

and keep it handy for future reference.

Products manufactured by Kohler Mira Ltd are designed to be safe provided, that

they are installed used and maintained in good working order, in accordance with

our instructions and recommendations.

Follow all warnings, cautions and instructions contained in this guide, and on or

inside the shower.

Mira Sport Thermostatic electric showers have separate controls for power

selection and for temperature/ow adjustment. A unique ow regulator stabilises

any temperature changes caused by water pressure uctuations, which can result

from taps being turned on or off or toilets being ushed.

When this shower has reached the end of its serviceable life, it should be disposed

of in a safe manner, in accordance with current local authority recycling, or waste

disposal policy.

Mira Sport Thermostatic models covered by this guide:

Guarantee

The Mira Sport has been designed for domestic use only, Mira Showers guarantee

the Mira Sport against any defect in materials or workmanship for a period of two

years from the date of purchase (shower ttings for one year).

For terms and conditions, refer to the back cover of this guide.

Patents and Design Registration

Design Registration: 001259 287-0002, 001259 287-0005

Patents: GB: 2341667, 2427460, 2404000, 2428286

Ireland: 82835, 85128, 85163, 85912

Product Model Number Colour

Sport Thermostatic 9.0 J03I White/Chrome

Sport Thermostatic 9.8 J03J White/Chrome

IMPORTANT SAFETY INFORMATION

WARNING - This shower can deliver scalding temperatures if not operated,

installed or maintained in accordance with the instructions, warnings and

cautions contained in this guide and on or inside the appliance.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. Installation of this shower must be carried out in accordance with these

instructions by qualied, competent personnel.

2. Isolate the electrical and water supplies before commencing installation. The

electricity must be isolated at the consumer unit and the appropriate circuit

fuse removed, if applicable. Mains connections are exposed when the cover

is removed.

3. DO NOT install the shower in areas with high humidity and temperature

(i.e. Steam rooms and saunas).

4. DO NOT install the shower where it may be exposed to freezing conditions.

Ensure that any pipework that could become frozen is properly insulated.

5. DO NOT switch the shower on if there is a possibility that the water in the

shower is frozen.

6. DO NOT switch the shower on if water starts leaking from the shower case.

Isolate the electrical supply to the shower immediately.

7. DO NOT connect the outlet of the shower to any tap, control valve, trigger

handset or showerhead other than those specied for use with this shower.

Only Kohler Mira recommended accessories should be used.

8. The water supplies to this product must be isolated if the product is not to be

used for a long period of time. If the product or pipework is at risk of freezing

during this period they should also be drained of water.

9. DO NOT perform any unspecied modications to the shower or its

accessories. When servicing only use genuine Kohler Mira replacement

parts.

10. If the shower is dismantled during installation or servicing then upon completion

the product must be inspected to ensure all electrical connections are tight and

that there are no leaks.

11. Read all installation instructions before installing this shower.

12. Upon completion of the installation, make sure that the user is familiar with the

operation of the shower, and leave this guide and the user guide with the owner.

PACK CONTENTS

Documentation

Tick the appropriate boxes to familiarise yourself with the part names and to

conrm that the parts are included.

1 x Mira Sport Thermostatic

Electric Shower

3 x Wall Plugs

1 x Compression Nut

3 x Fixing Screws

1 x Olive

1 x Installation Guide

1 x User Guide

1 x Guarantee Brochure

1 x Installation Template

2 x Case Inserts

WIRING DIAGRAM

INLET

CONNECTOR

TERMINAL

BLOCK

HEATER

TANK

MICRO

SWITCH (L) MICRO

SWITCH (R)

SOLENOID

LED/LED

HOUSING

PUSH BUTTON

SWITCH

BROWN B

GREEN D

BLUE C

RED K

BROWN J

BROWN G

BLACK M

BLACK L

RED H

BLUE E

BROWN F

BLUE E

BLACK N

GREEN A GREEN A

GREEN D

SPECIFICATIONS

European Conformity Information

The Mira Sport Thermostatic range of showers complies with the following European

directives:

2006/95/EC Low Voltage Directive, 2004/108/EC EMC Directive.

The Mira Sport range of showers are high power appliances and are subject to conditional

connection. If the main electrical supply fuse is rated less than 80 Amps, the local electricity

supply company must be contacted to conrm if the electrical supply is adequate.

The Mira Sport Thermostatic range of showers complies with the requirements of the UK’s

water regulations.

Plumbing Thermostatic Variant

Sport 9.0 Sport 9.8

Minimum Dynamic Pressure 70 kPa (0.7 bar)

Maximum Dynamic Pressure * 500 kPa (5 bar)

Minimum Static Pressure 20 kPa (0.2 bar)

Maximum Static Pressure * 1000 kPa (10 bar)

Maximum Inlet Temperature 30°C

Minimum Inlet Temperature 2°C

Inlet Connection 1/2" BSP Male / 15 mm Compression Fitting

Maximum Water Hardness 200 ppm CaCO3

Outlet Connection 1/2" BSP Male

Electrical Thermostatic Variant

Sport 9.0 Sport 9.8

Nominal Power at 230 V ac 8.3 kW 9.0 kW

Nominal Power at 240 V ac 9.0 kW 9.8 kW

Recommended MCB Rating 40 A 45 A

Maximum Supply Cable Size 16 mm²

Recommended RCD Rating 30 mA tripping current

Recommended Isolator Switch 45 A double-pole with 3 mm contact separation

Appliance Sealing Rating IP X4 - Suitable for installation in Zone 1

Maximum Ambient Temperature 30°C

Minimum Ambient Temperature 2°C

Dimensions

Height 358 mm

Width 215 mm

Depth 90 mm

*A drop tight pressure reducing valve should be installed where dynamic or static pressure

exceeds the gure stated in the Specications.

INSTALLATION REQUIREMENTS

Please read the Important Safety Information and specications sections at

the front of this guide, and the requirements detailed in this section before

installing the shower.

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Plumbing

1. The plumbing installation must comply with all national or local water regulations

and all relevant building regulations, or any particular regulation or practice

specied by the local water supply company.

2. Do not install the product in a position in which service access is limited.

3. Decide on a suitable position for the shower (minimum distance of 200 mm from

the ceiling to allow for cover t and removal).

4. The position of the shower and shower ttings must provide a minimum gap of

25 mm between the showerhead and the spill over level of any bath, shower

tray or basin and a minimum gap of 30 mm between the showerhead and the

spill over level of any toilet, bidet or other appliance with a Fluid Category 5

backow risk (see diagram on page 8).

5. The shower is suitable for installation within the shower area and is tted with

a pressure relief valve. It must be positioned over a water catchment area with

the controls at a convenient height for the user.

6. The shower must be tted to a waterproof at and even wall surface.

7. DO NOT t the shower to the wall and tile up to the case.

8. DO NOT seal the gap between the shower and the wall surface.

9. The showerhead should be positioned so that it discharges down the centre

line of the bath or across the opening of a shower cubicle.

10. The showerhead must be directed away from the shower unit, during normal

use the showerhead must not spray directly on to the shower unit.

11. DO NOT apply excessive force to plumbing connections; always provide

mechanical support when making plumbing connections. Any soldered joints

should be made before connecting the shower.

12. This shower is not designed to be plumbed directly from the rear. For rear-entry

supply, add an elbow to the supply pipe and connect as a rising or a falling supply.

13. If pipework and/or electrical cables enter the shower from the rear through a

hole in the wall provision must be made to prevent water ingress back into the

wall structure.

14. Only use the inlet connector supplied with the shower. DO NOT use any other

type of tting.

Hose Retaining Ring tted and shower ttings xed at a suitable height preventing

dirty water backow.

Zone of

Backow Risk

30 mm

Minimum

Toilet or Bidet

FC5 Hand Basin

FC3

Bath or Shower

Tray FC3

Electric

Shower

25 mm

Minimum

25 mm Minimum

15. A full bore/non restrictive servicing valve must be tted in a readily accessible

position adjacent to the shower to facilitate maintenance of the shower.

DO NOT use a valve with a loose washer plate (jumper) as this can lead to a

build up of static pressure.

16. A water treatment device should be installed where the water hardness may

exceed 200 ppm. Malfunctions caused by excessive limescale formation are

not covered by this shower’s guarantee (see back page for details).

17. The installation must not cause the hose to be sharply kinked during normal use.

18. DONOT perform the electrical installation until the plumbing has been completed

and checked for leaks.

Note! There will be occasions when the hose retaining ring will not provide a suitable

solution for Fluid Category 3 installations, in these instances an outlet double

checkvalve must be tted, this will increase the required supply pressure typically by

10kPa (0.1 bar). Double checkvalves tted in the inlet supply to the appliance cause

a pressure build up, which affect the maximum static inlet pressure for the appliance

and must not be tted. For Fluid category 5 double checkvalves are not suitable.

LOW HIGH

ECO

POWER

THERMOSTATIC

WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

Electrical

1. The electrical installation must comply with BS 7671 (commonly referred to as

the IEE Wiring Regulations) and all relevant building regulations, or any particular

regulation or practice specied by the local electricity supply company.

2. Ensure that all circuit protection devices, switches and cabling is adequate

for the rated current of the shower and that the rating of the electricity supply

company fuse and the consumer unit are adequate for the additional demand.

3. The shower must be earthed. Ensure any supplementary bonding complies

with the relevant regulations.

4. This shower is intended to be permanently connected to the xed electrical wiring

of the mains system. A separate supply must be provided from the consumer

unit to the shower.

5. DO NOT supply any other electrical equipment including extractor fans or pumps

via this product.

6. This shower must be provided with means for local disconnection that is

incorporated into the xed wiring in accordance with the relevant local wiring

regulations. This must be a double pole switch, which has at least 3 mm contact

separation in each pole. The switch can be a ceiling mounted pull-cord type within

the shower room or a wall mounted switch tted in the applicable zone area.

7. A 30mA Residual Current Device (RCD) must be incorporated into the electrical

supply to this shower in accordance with wiring regulations.

8. DO NOT apply excessive force to the terminal block.

9. All electrical connections should be checked for tightness to prevent overheating

before switching on the electrical supply.

10. DO NOT switch on the electrical supply until the plumbing has been completed

and checked for leaks.

INSTALLATION

Caution! Do not drill into

buried cables or pipes.

Warning! Isolate the electrical and water supplies before installing the shower.

Remove the three screws that

hold the cover on and remove

the cover.

Remove the service tunnel.

Using the installation template

supplied, mark the positions

of the three xing holes.

Note! Ensure that there are

sufcient lengths of supply pipe

and electrical cable to reach the

connection points.

Removetheinstallation template

and drill three holes to suit the

xing screws and wall plugs.

Caution! Do not drill into cables

or pipes in the wall.

Cover

Screws

Screw

Service

Tunnel

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-332 Bedienungsanleitung

Kohler

Kohler K-3323X Montageanleitung

Kohler

Kohler 528D Bedienungsanleitung

Kohler

Kohler K-9511 Bedienungsanleitung

Kohler

Kohler K-702200 Bedienungsanleitung

Kohler

Kohler K-T16237 Bedienungsanleitung

Kohler

Kohler K-616 Montageanleitung

Kohler

Kohler K-9245 Montageanleitung

Kohler

Kohler K-6284 Montageanleitung

Kohler

Kohler TOOBI 8965IN-9FP Bedienungsanleitung

Kohler

Kohler K-8297TW-HC-0 Montageanleitung

Kohler

Kohler 45541A-0 Bedienungsanleitung

Kohler

Kohler K-T14412 Bedienungsanleitung

Kohler

Kohler K-19797T Bedienungsanleitung

Kohler

Kohler TAUT 24572X-4A Bedienungsanleitung

Kohler

Kohler K-T15806 Bedienungsanleitung

Kohler

Kohler K-7659 Bedienungsanleitung

Kohler

Kohler K-4991X Montageanleitung

Kohler

Kohler K-7980 Montageanleitung

Kohler

Kohler K-6945 Bedienungsanleitung

Kohler

Kohler Reve K-5036BR Bedienungsanleitung

Kohler

Kohler K-15003 Bedienungsanleitung

Kohler

Kohler K-2271 Bedienungsanleitung

Kohler

Kohler K-T125 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung