Kohler K-19797T Bedienungsanleitung

-1-

1037583-T01-A

BEFORE YOU BEGINBEFORE YOU BEGIN

INSTALLATION INSTRUCTIONS

K-19797T,

VITREOUS CHINA

SEMI RECESSED LAVATORY WITH SHROUD,

PEDESTAL LAVATORY, HALF PEDESTAL LAVATORY

K-19798T, K-19799T

IMPORTANT !

·Installer: This manual is the property of the customer and

must be retained with the product for maintenance and

operational purposes.

Observe all local plumbing and building codes.

Turn off the water supply.

Inspect the drainage and supply tubing. Replace if

necessary.

Prior to installation, unpack the new lavatory and carefully

inspect it for damage. Return the lavatory to its protective

carton until you are ready to install it.

For replacement installations, make sure the existing

cutout is the same or smaller size as the new lavatory.

Carefully read these instructions before you attempt to

remove your old lavatory. Before installing your new

lavatory, make sure you have the proper materials

necessary to complete the job. This will help you avoid

costly mistakes.

All information in these instructions is based upon the

latest product information available at the time of

publication. Kohler China reserves the right to make

changes in product characteristics, packaging, or

availability at any time without notice.

These instructions contain import care, cleaning, and

warranty information please leave these instructions for

the consumer.

, 2004

ORDERING INFORMATION

Escale Semi Recessed Lavatory with Shroud ..........K-19797T

Includes Semi Recessed Lavatory Basin ..........K-19034T

Includes Semi Recessed Lavatory Shroud........K-19028T

Escale Pedestal Lavatory .........................................K-19798T

Includes Pedestal Lavatory Basin......................K-19023T

Includes Pedestal .............................................K-19024T

Escale Half Pedestal Lavatory..................................K-19799T

Includes Pedestal Lavatory Basin......................K-19023T

Includes Semi Recessed Lavatory Shroud........K-19028T

.................................................K-19797T

..........................................K-19034T

............................................................K-19028T

............................................................K-19798T

............................................................K-19023T

...........................................................K-19024T

.........................................................K-19799T

............................................................K-19023T

............................................................K-19028T

-2-

RECOMMENDED TOOLS AND MATERIALS

(Not Supplied)

Sealant

Safety Glasses

Pencil

Tape Measure

Rutty Knife

Keyhole Saw or Saber Saw

Scissors

Pipe Wrench

Drill with 1/2 (13mm) or larger drill bit

Adjustable Wrench

Tubing Cutter

Hacksaw

()

( 13 (1/2 ) )

SAFETY: WARNINGS

Kohler products are precision-engineered and should give

continued superior and safe performance, provided:

1. They are installed, commissioned, operated and

maintained in accordance with the recommendations given

in this Manual.

2. Periodic attention is given, as necessary, to maintain the

product in good functional order. Recommended guidelines

are given in the section.

Carefully inspect the new fixture for any signs of damage.

When installing Kohler Products, manufacturers guidelines for

power tool safety should be followed.

MAINTENANCE

K-19023T/K-19024T

ROUGHING-IN

Unit: mm

835 10 835 10

35 35

885

250

150

700

900

590

720

445

280

155

520

650

19023T-8

160

200

1037583-T01-A

K-19023T/K-19028T

K-19034T/K-

19028T

-3-

*Fixing holes

835 10

720

650

885

250

150

700

900

590

445

280

155

520

19023T-8

160

200

590 660

280

*45

15 100

520

175

830

255

100

420

280

200 360

520

560

1000

785 10

1037583-T01-A

-4-

INSTALLATION

SPECIFICATION

Plumbing Connections

Hot (H) and Cold inlets must be connected to the correct

inlet pipes.

(H) (C)

()

Install the Washbasin and

Vanity Washasin with

Pedestal

1. Install the services.

2. Make sure that the hot and cold

water supply pipes and the waste

are installed correctly.

3. Fix the pedestal in position and

place a 2mm thick piece of card or

polythene on top of it. Place the

washbasin on top of this and ensure

that it is level.

The card or polythene allows the

pedestal to slide under the basin easily

once fixed in position.

Note!

P4132110

Wall Plug

Attachment Bolt(x2)

(2 )

Refer to dimensional

drawings for recommended

height for fixing holes

Card/Polythene

Pedestal

Level

Card/Polythene

280mm

1037583-T01-A

4. Mark through the position of the fixing holes for the basin.

Make sure that you avoid hidden cables and

pipes when drilling holes in the wall.

5. Remove the basin and drill the fixing holes.

6. Fit the wall plugs and attachment bolts.

The hot and cold water supplies must be installed with

isolating valves.

Caution!

Note!

-5- 1022163-2

7. Fit the tap to the washbasin or the

vanity washbasin in accordance

with the manufacturer,s instructions.

8. Apply silicone sealant to the back of

the washbasin.

10. Adjust the offset nut until the

washbasin is level.

11. Use a level to ensure the

washbasin is level. Fit the washers

and the nuts to the attachment

bolts to secure the washbasin in

place. Tighten the nuts.

The pedestal does not support

the basin.

12. Put the pedestal in place, making

sure it is fitted securely against the

bottom of the washbasin.

13. Carefully remove any excess

silicone sealant.

Fit the washbasin in position over

the attachment bolts.

Note!

Install the Semi Pedestal

1. Hold the semi pedestal in position

against the bottom of the handwash

basin and mark the top edge of the

semi pedestal.

2. Locate the bracket centrally, with

the top edge 10mm down from the

previous marks.

Make sure that you

avoid hidden cables and pipes

when drilling holes in the wall.

3. Drill the fixing holes and secure the

bracket to the wall with wall plugs

and screws.

Caution!

P3979030

Apply a thin bead of Silicone Sealant

Offset Nut

Nut

Washer

10.

11.

12.

13.

Attachment Bolts

Fixing Bracket

Semi Pedestal

Wall Plug

Screw

10mm

P4132040

P4132050

1037583-T01-A

Fix the Semi Pedestal

Install the Vanity Top

1. Install the services.

2. Make sure that the hot and cold

water supply pipes and the waste

are installed correctly.

3. Mark the position on the wall for the

attachment bolts.

P4132070

Caution!

Note!

Make sure that you

avoid hidden cables and pipes

when drilling holes in the wall.

4. Drill the fixing holes.

5. Fit the wall plugs and attachment

bolts.

The hot and cold water supplies

must be installed with isolating valves.

6. Fit the tap to the vanity top in

accordance with the manufacturer s

instructions.

7. Apply silicone sealant to the back of

the vanity top.

Fit the washbasin in position over

the attachment bolts.

P4132080

-6-

Note! The semi pedestal is only held in position by the

tension of the springs.

1. Fit the springs and clips to the bracket.

2. Put the semi pedestal in position.

3. Pull the springs down and fit the clips into the holes on the

bottom of the semi pedestal.

4. Ensure the semi pedestal is fitted securely.

P3979060

Bracket

Spring

Clips

Note! Pedestal may differ slightly from the one shown

Wall Plug

Attachment Bolt(x2)

(2 )

Refer to dimensional

drawings for recommended

height for fixing holes

Apply silicone sealant

280mm

1037583-T01-A

9. Adjust the offset nut until the vanity

top is level.

10. Use a level to ensure the the vanity

top is level. Fit the washers and the

nuts to the attachment bolts to

secure in place. Tighten the nuts.

11. Remove any excess silicone

sealant.

12.Place the overflow cover over the

overflow hole in the vanity top

making sure it is orientated correctly.

Install the Plumbing

1. Install the drain in accordance with

the manufacture s instructions.

Make sure a

watertight seal exisits on all

washbasin drain connections.

Provide access to the

plumbing connections for future

plumbing maintenance.

2. Connect the hot and cold water

supplies.

3. Open the hot and cold water valves

and check the supply connections

for any leaks.

4. Run water into the washbasin or

vanity top, and check the drain

connections for any leaks.

Caution!

-7-

10.

11.

12.

Washer Nut

Offset Nut

HOT COLD

P4132130

P4132100

P3978070

1037583-T01-A

-8-

Cleaning

Caution! Risk of product damage. Many cleaners

contain abrasive and chemical substances, and should

not be used for cleaning stainless steel, enamel,

plated or plastic fittings. These finishes should be

cleaned using a mild washing up detergent or soap

solution, rinsed and then wiped dry with a soft clean

cloth.

LIMITED ONE-YEAR WARRANTYLIMITED ONE-YEAR WARRANTY

Plumbing Fixtures and Fittings Limited

One-year Warranty

Kohler plumbing fixtures and fittings are warranted to be

free of manufacturing defects.

This product is warranted for one year from date of

purchase. Kohler China will be responsible for any

problems caused by manufacturing defects provided with

the invoice. Kohler China will, at its election, repair,

replace or make appropriate adjustment where Kohler

China inspection discloses any such defects occurring in

normal usage within one year after purchase.

Implied warranties including that of merchantability and

fitness for a particular purpose are expressly limited in

duration to the duration of this warranty, Kohler China

disclaims any liability for special, incidental or

consequential damages. Damages to the product caused

by misuse, abuse and installation that is not in

accordance with the owner's manual are not covered by

this warranty.

To obtain quick warranty service, please contact your

dealer, or write to Kohler China. (Original sales receipt

must be provided as the proof of purchase.)

Kohler China Investment Company Ltd.

Central Customer Service Center

19/F, Shanghai Square, 138 Huai Hai Road,

Luwan District, Shanghai, PRC

Zip Code: 200021

This is our exclusive written warranty.

USER MAINTENANCEUSER MAINTENANCE

()

138

200021

1037583-T01-A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-4107T Bedienungsanleitung

Kohler

Kohler K-2286 Montageanleitung

Kohler

Kohler Torsion Bedienungsanleitung

Kohler

Kohler Mira Azora Bedienungsanleitung

Kohler

Kohler K-12286-4 Montageanleitung

Kohler

Kohler K-170 Montageanleitung

Kohler

Kohler Oblo K-124B16-SANA-CP Bedienungsanleitung

Kohler

Kohler K-7273 Montageanleitung

Kohler

Kohler TOOBI 8965IN-9FP Bedienungsanleitung

Kohler

Kohler K-7514 Bedienungsanleitung

Kohler

Kohler Clearflo K-7160-TF Montageanleitung

Kohler

Kohler PURIST UPGRADE K-99168T Bedienungsanleitung

Kohler

Kohler 23776T-7 Bedienungsanleitung

Kohler

Kohler K-514 Bedienungsanleitung

Kohler

Kohler K-7437 Bedienungsanleitung

Kohler

Kohler Sterling SC2522SBG Montageanleitung

Kohler

Kohler 8022A Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Kohler

Kohler ENGLEFIELD CORNER CONTOUR PLUS Bedienungsanleitung

Kohler

Kohler rada FE9 Bedienungsanleitung

Kohler

Kohler Rada Tripoint-F 2.1658.011 Bedienungsanleitung

Kohler

Kohler 1093479-2-B Montageanleitung

Kohler

Kohler K-2749 Series Montageanleitung

Kohler

Kohler K-11660 Montageanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung