Kohler STANCE K-37467T Bedienungsanleitung

13-1 528437

INSTALLATION INSTRUCTIONS

L 8mm

PIVOT DOOR, L-SHAPE, 8mm

K-37467T

STANCE

-1-

, 2010

BEFORE YOU BEGINBEFORE YOU BEGIN

(

) 50~80mm

3mm/m

Before you install your shower door, please read

these instructions carefully to familiarize yourself

with the required tools, materials, and installation

sequences. Follow the sections that pertain to your

particular installation. This will help you avoid costly

mistakes. In addition to proper installation, read all

operating and safety instructions.

All information is based on the latest product

information available at the time of publication.

Kohler China Ltd. reserves the right to make

changes in product characteristics, packaging, or

availability at any time without notice.

These instructions contain important care, cleaning,

and warranty information-

Make sure that the bath and the finished wall

material are completely and correctly installed prior

to installing your shower door. Prepare waterproof

layer to wall and floor of the showering area. It is not

allowed for any presence of electric switches and

sockets. Make sure the floor drain runs smoothly.

Before starting the door installation, lay out and

identify all the parts. Use the exploded view

illustrated on page 3 for reference.

For the installation method of customized shower

with different dimensions, please refer to this

instructions.

Tempered glass cannot be cut, drilled or

knocked by hard object. Make sure corner area

of the glass refraining from knocking so as to

cause personal injury due to broken glass.

Please install this door on Kohler

receptors or curbs. (Not included). If the curb is not

Kohler-branded, please note its top width should fall

within the range of 50~80mm.

The shower door requires a flat vertical

finished wall. The squareness of the wall is

recommended no more than 3 mm/m. KOHLER

Company won t take responsibility of the installation

quality.

please leave these

instructions for the consumer.

CAUTION: Risk of injury or product damage.

ATTENTION:

IMPORTANT:

1161742-T01-A

-2-

ROUGHING-IN

Unit: mm

BCH

SKU

K-37467T 1000-1400 700-1000 1850-2000

800-820-2628

IMPORTANT

800-820-2628

The wall channel for the side panel is delivered to the

door assembly. Remove the panel wall channel before

installing the door, but do not remove the transit blocks.

Before installation check that all components are

correctly supplied.

If any parts are missing please ring the helpline.

PARTS IDENTIFICATIONPARTS IDENTIFICATION

1161742-T01-A

-3-

Phillips Screwdriver

Pencil

Caulk Gun

Measuring Tape

Safety Glasses

Center Punch

Hammer

Knife

Masonry Drill & 6mm Drilll Bit

Level

Drop Cloth

Materials Required

Tape

Silicone Sealant

Tools Required

6mm

INSTALLATION REQUIREMENTSINSTALLATION REQUIREMENTS

Side Seal

Side Panel

Return Panel Assy

Cover Strip

Edge Strip

Top Frame

Wall Frame

Magnetic Strip

Wall Jamb

Bottom Frame

Door Glass

Pivot Caver, Bottom

Pivot Caver, Top

Handle Assy.

Glass Shelf

Pivot Pin

Cover Cap

Frame Cap, Bottom

Frame Cap, Top

4mm Allen Key

4mm

Cover

X10

X6X4

1161742-T01-A

-4-

INSTALLATION

The wall jamb

be kept

vertical.

must

0mm

Fix the wall jamb.

STEP

Mark the wall 20mm in from the

front edge of the tray on both

sides.

20mm

STEP

IMPORTANT:

MUSTTray be level

along front edge.

NOTE

LH version shown. RH fitting is a mirror image of these instructions.

IMPORTANT

Tray must be level in all planes

or door will not install properly.

0mm

6mm

RETURN SIDE

Mark the wall 20mm in from the front edge of the tray

on both sides.

20mm

1161742-T01-A

-5-

STEP

Fix the side wall jamb.

STEP

The wall jamb

be kept

vertical.

must

0mm

6mm

The side

of the wall

frame with hole

shall face

inside.

Note:

Frames raised

shall face outside.

Note:

Fix both top and bottom frame to the side wall frame.

Insert the frame into the wall jamb. Insert the return panel assy into the wall jamb.

1161742-T01-A

STEP

Connect the return panel assy with the top and the bottom frame.

-6-

STEP

Please first insert the glass into the top frame and then into the bottom frame.

Please insert the glass in the

correct direction: the end with the

hole shall be close to the top frame

and the labeled side with arrows on

the label shall be against the wall.

1161742-T01-A

-7-

STEP

Insert the glass into the wall frame.

Lift the door into place.

Insert the pin into the base and then insert the glass door.

IMPORTANT: Ensure the door is fully supported

at all times.

Note: Please make sure

that there should be inserts

with correct directions at

both these two places.

1161742-T01-A

STEP

Remove the pivot pin assembly on top. Insert the pivot pin both into the base and the body.

Then tighten the glass and the pivot pin assembly.

Note: The pivot

pin assembly

should be

vertical after

being tightened.

Push the wall frames at both sides to make the gap even between the

glass and the top and bottom frames.

Install the handle.

-8-

1161742-T01-A

STEP

Tighten the wall jamb and the wall frames.

STEP

-9-

Fix the magnetic strips onto the door glass and the

wall frames.

When the door is closed the

magnetic strips should touch along

their length.

Install the edge strip to fix the side panel.Fix the glass and the top frame. Then insert the side

seal into the wall frame.

1161742-T01-A

STEP

Install the base of the glass bracket.

Note: Ensure the accessory is

positioned in a horizontal way.

6mm

Note: Ensure the

accessory is positioned

in a horizontal way.

STEP

Line, then fix the bracket base.

STEP

Fix the glass bracket.

STEP

-10-

Insert the cover seal to the top frame.

1161742-T01-A

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-12177 Bedienungsanleitung

Kohler

Kohler K-73078 Montageanleitung

Kohler

Kohler 1114111 Bedienungsanleitung

Kohler

Kohler Singulier 7787T-4 Bedienungsanleitung

Kohler

Kohler K-6268 Montageanleitung

Kohler

Kohler K-922 Bedienungsanleitung

Kohler

Kohler K-8593 Montageanleitung

Kohler

Kohler SKYLINE Series Bedienungsanleitung

Kohler

Kohler K-10586 Montageanleitung

Kohler

Kohler K-2286 Montageanleitung

Kohler

Kohler Purist 14434 Bedienungsanleitung

Kohler

Kohler K-1107 Bedienungsanleitung

Kohler

Kohler K-352 Montageanleitung

Kohler

Kohler Devonshire K-TS395-4S Bedienungsanleitung

Kohler

Kohler 11679T Bedienungsanleitung

Kohler

Kohler K-6811 Montageanleitung

Kohler

Kohler K-6814 Montageanleitung

Kohler

Kohler Stance 14775-4-CP Montageanleitung

Kohler

Kohler ALEO 97826T-4 Bedienungsanleitung

Kohler

Kohler K-2271 Bedienungsanleitung

Kohler

Kohler K-10215 Montageanleitung

Kohler

Kohler K-4709 Bedienungsanleitung

Kohler

Kohler K-7142 Montageanleitung

Kohler

Kohler MODULO 78023T-4 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung