Konica Minolta Bizhub PRO 950 Series Bedienungsanleitung

TROUBLESHOOTING GUIDE

bizhub PRO950

2009.12

Ver.1

KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.

bizhub PRO 950 Troubleshooting Guide

Contents

Notes

1. Caution of use Delete All Data for HDD ・・・・・・・・・・・・ 1

2. bizhubPRO950_New_developing_unit ・・・・・・・・・・・・ 2 - 4

3. Density reduction due to IDC sensor contamination ・・・・・・・・・・・・ 5

4. About the setting of Large size paper count method ・・・・・・・・・・・・ 6

5. Notes for PS Plug-in driver ・・・・・・・・・・・・ 7

Reference information

6. RC mounting kit for 920/950 ・・・・・・・・・・・・ 8 - 9

7. Paper feed roller setting of main body trays and LU-407/408 ・・・・・・・・・・・・ 10 - 11

8. Soil at paper edge ・・・・・・・・・・・・ 12 - 16

9. Paper setting table Ver.2.0 (for soft roller) ・・・・・・・・・・・・ 17 - 20

10. Paper setting table Ver.2.0 (for hard roller) ・・・・・・・・・・・・ 21 - 24

11. Machine code and Destination code for PK-504/505 ・・・・・・・・・・・・ 25

12.ICPList ・・・・・・・・・・・・ 26 - 32

13. Special firmware list for engine and options ・・・・・・・・・・・・ 33 - 35

14. Printer Controller firmware printer driver list ・・・・・・・・・・・・ 36 - 40

15. Controller log Capture getting procedure ・・・・・・・・・・・・ 41 - 44

Others

16. J7245 (ZU605/607) ・・・・・・・・・・・・ 45 - 48

Caution of use: "Delete All Data" for HDD TNBT0900126EN

Category: Main body(HDD) Date of issue: Aug.31.2009

Object machines:1200/1200P/1051, 950

The function of "Delete All Data" for HDD has been newly added to the

"Administrator Setting" of bizhub 1200/1200P,1051 and 950.

This TNI explans important information of this function.

bizhubPRO1200 Sirease bizhubPRO950

1. Purpose of this function

This function is designed to use ONLY when discarding (scrap) the machine.

Purpose of this function is to delete personal data and secret data in the

machine in one action.

It is enabled by changing the value of DIPSW40-1 to "1". (default is "0")

2. Functions

The personal data and secret data in the machine will be deleted if preformed

this function.

Concretely, the followings are performed.

-HDD1 and HDD2 is overwritten by the selected overwrite mode.

-The personal data in the memory board (NVRAM) is deleted.

-It memorize that the function was preformed.

3. Notes (Important information)

Do NOT execute this function, unless when discarding the machine.

After performing this function, the machine will NOT work.

Return to home

Correspondence procedure to MIF machines according to

bizhub PRO950 new developing unit

TNBT0900113EN

Category: Main body(Process) Date of issue: July.24.2009

Object machine : bizhub PRO950

Purpose : Countermeasure for Toner spill(Further improvement)

Object parts: 1. (New) developing unit

2. Engine firmware

*3. (New) Recycle unit

[When RC-501 is installed, it is necessary.]

*3 - It is necessary to combine with RC mounting kit

Parts Number / Firmware / ETD:

Parts Name Parts Number ETD Remarks

(New)Developing unit A0Y5R70311 August/2009 Service parts

(New)Recycle unit 57GA-2303 September/2009 Service parts

RC mounting kit 57GA-K011 August/2009 Service parts

Firmware Name Version Release schedule with

CSES

Remarks

Engine firmware 20 July/2009 DLBT0902332EN*

[Distinction method]

Developing unit

Old type New type

It changed from

“K” to “N”.

Ｎ

Recycle unit

The following parts number was established by service parts.

57GA-2303

[MIF machines : For the combination of bizhub PRO950 + RC-501]

Name Parts number & Firmware version

(New)Developing unit A0Y5R70311

(New)Recycle unit 57GA-2303

RC mounting kit 57GA-K011

Engine firmware Ver.20

It is necessary to change DipSW. (For New developing unit) (DIPSW24-0 = bit01)

[MIF machines : bizhub PRO950 (RC-501 uninstallation)]

Name Parts number & Firmware version

Developing unit A0Y5R70311

Engine firmware Ver.20

It is necessary to change DipSW. (For New developing unit) (DIPSW24-0 = bit01)

[When you mistake the combination by setting of the old /new type developing unit and

DipSW.]

The timing of the toner supply is different by new type and old type of the developing unit.

Therefore, it is necessary to match it to the DipSW setting suitable for the type of the

developing unit.

Developing unit

Switch DIP-SW for New

developing unit

Address Bit

New type Old type Degree of incidence

24-0 1(New) O X

X: The image density

decreases.

DipSW

24-0 0(Old) X O X: Toner spill increases.

[Correspondence schedule for mass-production]

Applied to July/2009

[Serial cut in number]

Point of destination Serial cut in number

US Since “A0Y5011000631”

AUST Since “A0Y5042000026”

US GSA Since “A0Y5012000026”

EU Since “A0Y5021000327”

AP Since “A0Y5041000144”

TW Since “A0Y5071000001”

CN Since “A0Y5081000001”

KOR Since “A0Y5091000008”

Develop EU Since “A0Y5121000001”

ONA US Since “A0Y5211000124”

Develop AP Since “A0Y5141000001”

Return to home

Density reduction due to IDC sensor contamination TNBT0900010EN

Category: Main body(Process) Date of issue: Jan.28.2009

SYMPTOM:

If the IDC sensor is cleaned with dry cloth during machine setup or periodical

maintenance, IDC sensor may become unable to detect the density correctly,

causing image density reduction or toner spill to occur.

REQUEST:

When cleaning the IDC sensor, be sure to clean with a cotton swab or the like

moistened with alcohol.

IMPORTANT:

If the IDC sensor has been cleaned with dry cloth, replace the sensor.

Sensor once cleaned with dry cloth cannot restore the functionality even if it is

cleaned with alcohol.

Be sure to replace it.

Return to home

About the setting of Large size paper count method TNBT0900094EN

Category: Main body(DIPSW) Date of issue: June.8.2009

Object machines:7085/920/950/1050

The default configuration of Large size paper count gives a false impression.

- Large size paper(A3 or 11x17) count method(maintenance counter)

Wrong:DIPSW:8-6=0(1count) <---- Default

Please change the DIPSW setting as follows.

DIPSW:8-6=1(2counts)

[Reason] The durability of parts is designed by the A4 1 count.

However, the parts durability cannot be confirmed correctly,

when Large size paper count is 1 count.

Return to home

Notes for PS Plug-in driver TABT0900135EN

Category: PS Plug-in driver Date of issue: July.17.2009

Object machines:1200/1200P/1051, 950

Subject: When selecting custom size as the original size on the PS(Plug-in)

driver, it's impossible to output with auto tray setting on the driver.

Solutions: When selecting custom size as the original size on the driver, it's

needed to select Paper Tray.

Please select the paper tray on the driver if you output custom size

paper.

Return to home

RC mounting kit for bizhub PRO920/950 TNBT0900112EN

Category: RC-501 Date of issue: July.22.2009

This information is the parts number of "RC mounting kit" for 920/950.

- RC mounting kit parts number:57GA-K011

The "Clamp", "Nylon clamp" and "TP screw M4x8" for bh.PRO950 are

including in RC mounting kit(57GA-K011).

Return to home

Go to the next page

Andere Handbücher für bizhub PRO 950 Series

Inhaltsverzeichnis

Andere Konica Minolta Drucker Handbücher

Konica Minolta

Konica Minolta PagePro 1350W Kurzanleitung

Konica Minolta

Konica Minolta PagePro 1350E Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 2200 DeskLaser Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2450 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5440 dl Bedienungsanleitung

Konica Minolta

Konica Minolta accuriopress c6100 Bedienungsanleitung

Konica Minolta

Konica Minolta PAGEPRO 4650EN Bedienungsanleitung

Konica Minolta

Konica Minolta PagePro 1200W Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 2430 DL Handbuch

Konica Minolta

Konica Minolta Color Care IQ-501 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2500W Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5430 DL Konfigurationshandbuch

Konica Minolta

Konica Minolta magicolor 1690MF Bedienungsanleitung

Konica Minolta

Konica Minolta DRYPRO 873 Bedienungsanleitung

Konica Minolta

Konica Minolta DRYPRO 771 Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 5440 dl Bedienungsanleitung

Konica Minolta

Konica Minolta AccurioPrint 2100 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 1250 Bedienungsanleitung

Konica Minolta

Konica Minolta magicolor 2400W Bedienungsanleitung

Konica Minolta

Konica Minolta Magicolor 2400 Series Bedienungsanleitung

Konica Minolta

Konica Minolta 2060 Kurzanleitung

Konica Minolta

Konica Minolta Bizhub-C31P Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 225i Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C253 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung

Konica Minolta bizhub PRO 950 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken