Kontron CP6003-SA Bedienungsanleitung

If it’s embedded, it’s Kontron.

» User Guide «

P R E L I M I N A R Y

CP6003-SA

6U CompactPCI Processor Board based on

the 2nd Generation Intel® Core™ i7/i5 Processor with

the Intel® QM67 Express Chipset

Doc. ID: 1044-9757, Rev. 2.0

September 15, 2011

Preface CP6003-SA

Page ii ID 1044-9757, Rev. 2.0

P R E L I M I N A R Y

Revision History

Imprint

Kontron Modular Computers GmbH may be contacted via the following:

MAILING ADDRESS TELEPHONE AND E-MAIL

Kontron Modular Computers GmbH +49 (0) 800-SALESKONTRON

Sudetenstraße 7 [email protected]

D - 87600 Kaufbeuren Germany

For further information about other Kontron products, please visit our Internet website:

www.kontron.com.

Disclaimer

not guaranteed for legal purposes. Information has been carefully checked and is believed to

be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron

logo and all other trademarks or registered trademarks are the property of their respective own-

ers and are recognized. Specifications are subject to change without notice.

Publication Title: CP6003-SA: 6U CompactPCI Processor Board based on the 2nd Genera-

tion Intel® Core™ i7/i5 Processor with the Intel® QM67 Express Chipset

Doc. ID: 1044-9757

Rev. Brief Description of Changes Date of Issue

1.0 Initial issue 22-Jul-2011

2.0 General update 15-Sep-2011

CP6003-SA Preface

ID 1044-9757, Rev. 2.0 Page iii

P R E L I M I N A R Y

Table of Contents

Revision History .........................................................................................................ii

Imprint ........................................................................................................................ii

Disclaimer ..................................................................................................................ii

Table of Contents ......................................................................................................iii

List of Tables .............................................................................................................ix

List of Figures ...........................................................................................................xi

Proprietary Note ......................................................................................................xiii

Trademarks .............................................................................................................xiii

Environmental Protection Statement .......................................................................xiii

Explanation of Symbols ..........................................................................................xiv

For Your Safety ........................................................................................................xv

High Voltage Safety Instructions ..........................................................................xv

Special Handling and Unpacking Instructions .....................................................xv

General Instructions on Usage ...............................................................................xvi

Two Year Warranty .................................................................................................xvii

1. Introduction ............................................................................. 1 - 3

1.1 Board Overview .......................................................................................1 - 3

1.2 Board-Specific Information ......................................................................1 - 4

1.3 System Expansion Capabilities ...............................................................1 - 5

1.3.1 PMC Module ...................................................................................1 - 5

1.3.2 XMC Module ...................................................................................1 - 5

1.3.3 CP6003-SA-MK2.5SATA Assembly Kit ...........................................1 - 5

1.3.4 SATA Flash Module ........................................................................1 - 5

1.3.5 Rear I/O Module .............................................................................1 - 5

1.4 Board Diagrams ......................................................................................1 - 5

1.4.1 Functional Block Diagram ...............................................................1 - 6

1.4.2 Front Panels ...................................................................................1 - 7

1.4.3 Board Layout ..................................................................................1 - 8

1.5 Technical Specification ..........................................................................1 - 10

1.6 Standards ..............................................................................................1 - 16

1.7 Related Publications .............................................................................1 - 17

Preface CP6003-SA

Page iv ID 1044-9757, Rev. 2.0

P R E L I M I N A R Y

2. Functional Description ............................................................2 - 3

2.1 Processor .................................................................................................2 - 3

2.2 Memory ....................................................................................................2 - 4

2.3 Intel® QM67 Express Chipset .................................................................2 - 4

2.4 Timer ........................................................................................................2 - 5

2.5 Watchdog Timer ......................................................................................2 - 5

2.6 Battery .....................................................................................................2 - 5

2.7 Reset .......................................................................................................2 - 5

2.8 Flash Memory ..........................................................................................2 - 6

2.8.1 SPI Boot Flash for uEFI BIOS .........................................................2 - 6

2.8.2 Serial ATA Flash Module (Optional) ................................................2 - 6

2.9 Trusted Platform Module 1.2 (On Request) .............................................2 - 6

2.10 Board Interfaces ......................................................................................2 - 7

2.10.1 Front Panel LEDs ............................................................................2 - 7

2.10.1.1 IPMI and Hot Swap LEDs .......................................................2 - 7

2.10.1.2 Watchdog and Temperature Status LEDs ...............................2 - 8

2.10.1.3 General Purpose LEDs ...........................................................2 - 9

2.10.2 DIP Switches SW1, SW2 and SW3 ..............................................2 - 11

2.10.3 USB Interfaces ..............................................................................2 - 11

2.10.3.1 USB Connectors J6 and J7 ..................................................2 - 12

2.10.4 Integrated Graphics Controller ......................................................2 - 12

2.10.4.1 Graphics Memory Usage ......................................................2 - 12

2.10.4.2 Analog VGA Connector ........................................................2 - 13

2.10.5 COM Ports .....................................................................................2 - 14

2.10.6 Gigabit Ethernet ............................................................................2 - 15

2.10.7 Serial ATA Interface .......................................................................2 - 16

2.10.7.1 Serial ATA Connector J14 .....................................................2 - 16

2.10.8 PMC Interface ...............................................................................2 - 17

2.10.8.1 PMC Connectors J21, J22, J23 and J24 Pinout ...................2 - 19

2.10.9 XMC Interface ...............................................................................2 - 21

2.10.10Debug Interface .............................................................................2 - 22

2.10.11 CompactPCI Interface ...................................................................2 - 22

2.10.11.1 Board Functionality when Installed in System Slot ...............2 - 22

2.10.11.2 Board Functionality when Installed in Peripheral Slot ...........2 - 23

CP6003-SA Preface

ID 1044-9757, Rev. 2.0 Page v

P R E L I M I N A R Y

2.10.11.3 Packet Switching Backplane (PICMG 2.16) .........................2 - 23

2.10.11.4 Hot Swap Support ................................................................2 - 23

2.10.11.5 Power Ramping ....................................................................2 - 23

2.10.11.6 Precharge .............................................................................2 - 23

2.10.11.7 Handle Switch ......................................................................2 - 23

2.10.11.8 ENUM# Interrupt ..................................................................2 - 23

2.10.11.9 Hot Swap LED ......................................................................2 - 23

2.10.12 CompactPCI Bus Connector .........................................................2 - 24

2.10.12.1 CompactPCI Connector Keying ...........................................2 - 24

2.10.12.2 CompactPCI Connectors J1 and J2 Pinout ..........................2 - 25

2.10.12.3 CompactPCI Rear I/O Connectors J3-J5 and Pinout ...........2 - 29

3. Installation ............................................................................... 3 - 3

3.1 Safety Requirements ...............................................................................3 - 3

3.2 CP6003-SA Initial Installation Procedures ..............................................3 - 4

3.3 Standard Removal Procedures ...............................................................3 - 5

3.4 Hot Swap Procedures .............................................................................3 - 6

3.4.1 System Master Hot Swap ...............................................................3 - 6

3.4.2 Peripheral Hot Swap Procedure .....................................................3 - 6

3.5 Installation of CP6003-SA Peripheral Devices ........................................3 - 8

3.5.1 USB Device Installation ..................................................................3 - 9

3.5.2 SATA Flash Module Installation ......................................................3 - 9

3.5.3 Installation of External Serial ATA Devices .....................................3 - 9

3.5.4 Onboard 2.5” HDD/SSD Installation ...............................................3 - 9

3.6 PMC/XMC Module Installation ..............................................................3 - 10

3.6.1 Rear I/O Device Installation ..........................................................3 - 10

3.7 Battery Replacement ............................................................................. 3 - 11

3.8 Software Installation ..............................................................................3 - 12

4. Configuration ........................................................................... 4 - 3

4.1 DIP Switches SW1, SW2 and SW3 Configuration ..................................4 - 3

4.1.1 DIP Switch SW1 Configuration .......................................................4 - 3

4.1.2 DIP Switches SW2 and SW3 Configuration ...................................4 - 4

Preface CP6003-SA

Page vi ID 1044-9757, Rev. 2.0

P R E L I M I N A R Y

4.2 Jumper Description ..................................................................................4 - 5

4.2.1 COMB Termination Jumper Settings ...............................................4 - 5

4.3 I/O Address Map ......................................................................................4 - 6

4.4 CP6003-SA-Specific Registers ................................................................4 - 7

4.4.1 Status Register 0 (STAT0) ...............................................................4 - 7

4.4.2 Status Register 1 (STAT1) ...............................................................4 - 8

4.4.3 Control Register 0 (CTRL0) ............................................................4 - 9

4.4.4 Control Register 1 (CTRL1) ............................................................4 - 9

4.4.5 Device Protection Register (DPROT) ............................................4 - 10

4.4.6 Reset Status Register (RSTAT) .....................................................4 - 11

4.4.7 Board Interrupt Configuration Register (BICFG) ...........................4 - 12

4.4.8 Status Register 2 (STAT2) .............................................................4 - 13

4.4.9 Board ID High Byte Register (BIDH) .............................................4 - 13

4.4.10 Board and PLD Revision Register (BREV) ...................................4 - 14

4.4.11 Geographic Addressing Register (GEOAD) ..................................4 - 14

4.4.12 Watchdog Timer Control Register (WTIM) ....................................4 - 15

4.4.13 Board ID Low Byte Register (BIDL) ..............................................4 - 17

4.4.14 LED Configuration Register (LCFG) .............................................4 - 18

4.4.15 LED Control Register (LCTRL) .....................................................4 - 19

4.4.16 IPMI Keyboard Controller Style Interface ......................................4 - 19

5. Power Considerations .............................................................5 - 3

5.1 System Power ..........................................................................................5 - 3

5.1.1 CP6003-SA Baseboard ...................................................................5 - 3

5.1.2 Backplane .......................................................................................5 - 4

5.1.3 Power Supply Units .........................................................................5 - 4

5.1.3.1 Start-Up Requirement .............................................................5 - 4

5.1.3.2 Power-Up Sequence ...............................................................5 - 4

5.1.3.3 Tolerance ................................................................................5 - 5

5.1.3.4 Regulation ...............................................................................5 - 5

5.2 Power Consumption ................................................................................5 - 6

5.2.1 Power Consumption of the CP6003-SA Accessories .....................5 - 8

5.2.2 Power Consumption per Gigabit Ethernet Port ...............................5 - 8

5.3 Maximum Power Consumption of PMC/XMC Module ............................5 - 8

CP6003-SA Preface

ID 1044-9757, Rev. 2.0 Page vii

P R E L I M I N A R Y

6. Thermal Considerations ......................................................... 6 - 3

6.1 Board Internal Thermal Monitoring ..........................................................6 - 3

6.2 Processor Thermal Monitoring ................................................................6 - 3

6.2.1 Digital Thermal Sensor (DTS) .........................................................6 - 3

6.2.2 Adaptive Thermal Monitor ...............................................................6 - 4

6.2.2.1 Frequency/sVID Control ........................................................6 - 4

6.2.2.2 Clock Modulation ....................................................................6 - 4

6.2.3 Catastrophic Cooling Failure Sensor .............................................6 - 5

6.3 Chipset Thermal Monitor Feature ............................................................6 - 5

6.4 External Thermal Regulation ...................................................................6 - 6

6.4.1 Operational Limits for the CP6003-SA ............................................6 - 8

6.4.2 Peripherals ......................................................................................6 - 9

A. CP6003-SA-MK2.5-SATA Assembly Kit .................................A - 3

A.1 MMADP-SATA01 Module Overview ........................................................A - 3

A.2 Technical Specifications ..........................................................................A - 3

A.3 MMADP-SATA01 Module Layout ............................................................A - 4

A.4 SATA Connector J2 .................................................................................A - 5

B. SATA Flash Module .................................................................B - 3

B.1 Technical Specifications ..........................................................................B - 3

B.2 SATA Flash Module Layout .....................................................................B - 4

Preface CP6003-SA

Page viii ID 1044-9757, Rev. 2.0

P R E L I M I N A R Y

This page has been intentionally left blank.

CP6003-SA Preface

ID 1044-9757, Rev. 2.0 Page ix

P R E L I M I N A R Y

List of Tables

1-1 CP6003-SA Main Specifications .............................................................. 1 - 10

1-2 Standards ................................................................................................ 1 - 16

1-3 Related Publications ................................................................................ 1 - 17

2-1 Features of the Processors Supported on the CP6003-SA ....................... 2 - 4

3 IPMI and Hot Swap LEDs Function ........................................................... 2 - 7

2-1 Watchdog and Temperature Status LEDs Function ................................... 2 - 8

2-2 General Purpose LED Function ................................................................. 2 - 9

2-3 POST Code Sequence ............................................................................ 2 - 10

2-4 POST Code Example .............................................................................. 2 - 10

2-5 DIP Switch SW1 Function ....................................................................... 2 - 11

2-6 DIP Switch SW2 Function ....................................................................... 2 - 11

2-7 DIP Switch SW3 Function ....................................................................... 2 - 11

2-8 USB Connectors J6 and J7 Pinout .......................................................... 2 - 12

2-9 D-Sub VGA Connector J9 Pinout ............................................................ 2 - 13

2-10 Serial Connector J8 (COMA) Pinout ........................................................ 2 - 14

2-11 Pinout of GbE Connectors J10, J11 and J12 ........................................... 2 - 15

2-12 SATA Connector J14 Pinout .................................................................... 2 - 16

2-13 PMC PCI/PCI-X Configuration ................................................................ 2 - 17

2-14 PMC Connectors J22 and J24 Pinout ..................................................... 2 - 19

2-15 PMC Connectors J21 and J23 Pinout ..................................................... 2 - 20

2-16 XMC Connector J20 Pinout ..................................................................... 2 - 21

2-17 CompactPCI PCI/PCI-X Configuration .................................................... 2 - 22

2-18 CompactPCI Bus Connector J1 System Slot Pinout ............................... 2 - 25

2-19 CompactPCI Bus Connector J1 Peripheral Slot Pinout ........................... 2 - 26

2-20 64-bit CompactPCI Bus Connector J2 System Slot Pinout ..................... 2 - 27

2-21 64-bit CompactPCI Bus Connector J2 Peripheral Slot Pinout ................. 2 - 28

2-22 CompactPCI Rear I/O Connector J3 Pinout ............................................ 2 - 29

2-23 CompactPCI Rear I/O Connector J3 Signals ........................................... 2 - 30

2-24 CompactPCI Rear I/O Connector J4 Pinout ............................................ 2 - 31

2-25 CompactPCI Rear I/O Connector J5 Pinout ............................................ 2 - 32

2-26 CompactPCI Rear I/O Connector J5 Signals ........................................... 2 - 33

4-1 DIP Switch SW1 for Boot Configuration .................................................... 4 - 3

Preface CP6003-SA

Page x ID 1044-9757, Rev. 2.0

P R E L I M I N A R Y

4-2 DIP Switch SW2 for CompactPCI Interface Configuration ......................... 4 - 4

4-3 DIP Switch SW3 for PMC Interface Configuration ..................................... 4 - 4

4-4 JP2 Jumper Setting for RS-422 TXD Termination (COMB) ....................... 4 - 5

4-5 JP3 Jumper Setting for RS-422 RXD Termination (COMB) ....................... 4 - 5

4-6 I/O Address Map ........................................................................................ 4 - 6

4-7 Status Register 0 (STAT0) .......................................................................... 4 - 7

4-8 Status Register 1 (STAT1) .......................................................................... 4 - 8

4-9 Control Register 0 (CTRL0) ....................................................................... 4 - 9

4-10 Control Register 1 (CTRL1) ....................................................................... 4 - 9

4-11 Device Protection Register (DPROT) ....................................................... 4 - 10

4-12 Reset Status Register (RSTAT) ................................................................ 4 - 11

4-13 Board Interrupt Configuration Register (BICFG) ...................................... 4 - 12

4-14 Status Register 2 (STAT2) ........................................................................ 4 - 13

4-15 Board ID High Byte Register (BIDH) ........................................................ 4 - 13

4-16 Board and PLD Revision Register (BREV) .............................................. 4 - 14

4-17 Geographic Addressing Register (GEOAD) ............................................. 4 - 14

4-18 Watchdog Timer Control Register (WTIM) ............................................... 4 - 16

4-19 Board ID Low Byte Register (BIDL) ......................................................... 4 - 17

4-20 LED Configuration Register (LCFG) ........................................................ 4 - 18

4-21 LED Control Register (LCTRL) ................................................................ 4 - 19

5-1 Maximum Input Power Voltage Limits ........................................................ 5 - 3

5-2 DC Operational Input Voltage Ranges ....................................................... 5 - 3

5-3 Input Voltage Characteristics ..................................................................... 5 - 5

5-4 CP6003-SA in uEFI Shell Mode ................................................................. 5 - 7

5-5 CP6003-SA with Win. XP and Processor and Graphics in Idle State ........ 5 - 7

5-6 CP6003-SA with Win. XP and Max. Proc. Workload and Basic Graphics Oper. 5 - 7

5-7 CP6003-SA with Win. XP and Maximum Processor and Graphics Workload ... 5 - 7

5-8 Power Consumption of CP6003-SA Accessories ...................................... 5 - 8

5-9 Power Consumption per Gigabit Ethernet Port ......................................... 5 - 8

5-10 PMC/XMC Module Current ........................................................................ 5 - 8

A-1 MMADP-SATA01 Main Specifications ....................................................... A - 3

A-2 SATA Connector J2 Pinout ........................................................................ A - 5

B-1 SATA Flash Module Main Specifications ................................................... B - 3

Inhaltsverzeichnis

Andere Kontron Computerhardware Handbücher

Kontron

Kontron AT8402 Bedienungsanleitung

Kontron

Kontron ePanel-mgx Bedienungsanleitung

Kontron

Kontron nanoETXexpress-SP Bedienungsanleitung

Kontron

Kontron X-Board UPA 63036 Bedienungsanleitung

Kontron

Kontron coolMonster/PM Bedienungsanleitung

Kontron

Kontron ETX -CN8 Bedienungsanleitung

Kontron

Kontron MOPSlcdGX1 Bedienungsanleitung

Kontron

Kontron KBox A-150-APL Bedienungsanleitung

Kontron

Kontron AT8060 Bedienungsanleitung

Kontron

Kontron USB-16REL Bedienungsanleitung

Kontron

Kontron AT8902M Bedienungsanleitung

Kontron

Kontron AT8901 Bedienungsanleitung

Kontron

Kontron COMh-sdID Bedienungsanleitung

Kontron

Kontron 11529 Bedienungsanleitung

Kontron

Kontron COMe-bID7 Bedienungsanleitung

Kontron

Kontron KTQ67/Flex-Medical Bedienungsanleitung

Kontron

Kontron ADA-SDVO-PEG16 Bedienungsanleitung

Kontron

Kontron ETX-CD Bedienungsanleitung

Kontron

Kontron AdvancedTCA AT8001 Bedienungsanleitung

Kontron

Kontron MOPS/386A Bedienungsanleitung

Kontron

Kontron CP6005-SA Bedienungsanleitung

Kontron

Kontron ePanel-C3 Bedienungsanleitung

Kontron

Kontron PCI-759 Bedienungsanleitung

Kontron

Kontron 3.5-SBC-APL V2.0 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung

Measurement Computing

Measurement Computing CIO-EXP-RTD16 Bedienungsanleitung

Matrox

Matrox DigiSuite DigiMix Installations- und Betriebsanleitung