Kramer VS-88H2 Bedienungsanleitung

VS-88H2 Quick Start

P/N:

2900- 301150QS

Rev:

Scan for full manual

VS-88H2 Quick Start Guide

This guide helps youinstalland use your VS-88H2 for the first time.

Go to www.kramerav.com/downloads/VS-88H2 to download the latest user manual and check if firmware

upgrades are available.

Step 1: Check what’s in the box

VS-88H2 4K HDMI 8x8 Matrix Switcher

1 Quick start guide

1 Set of rack

ears

1 Power cord

4 Rubber feet

Step 2: Get to know your VS-88H2

Feature

Function

IN SELECTOR Buttons

Press to select the input (1 to 8) to switch after selecting an output (also used for storing

machine setups in the STO-RCL modes and for selecting a pattern in the Pattern mode).

OUT SELECTOR Buttons

Press to select an output (1 to 8) to which the input is routed. Also used for storing machine

presets.

MUTE/PATTERN Button

Press to view the current pattern status and select the output/s to which a pattern is routed.

Press to mute audio or video on a selected output when D-AUDIO and/or VIDEO buttons are

pressed (lit).

ALL Button

Press to perform an action on all outputs (for example setting Mute mode, Pattern mode and

so on).

For switching, press ALL and then a specific IN button to route the selected input to all

outputs. For example, press ALL and then IN 2 to route input 2 to all the outputs.

STO Button

Press STO to store the current switching setting to a preset button.

RCL Button

Press RCL to recall the switching setting from a preset button.

ARC

For setting ARC mode on the inputs (see Step 6: Operate the VS-88H2).

D-AUDIO Button

Press to enable digital audio routing. When pressed together with VIDEO, the digital audio is

routed together with the video signal.

VIDEO Button

Press to select video inputs. When pressed together with D-AUDIO, video is switched

together with audio.

LOCK Button

Press and hold to toggle between locking and releasing the front panel buttons.

Press to save the following setups: HDCP (On/Off), ARC, Fast Switch and Switch mode.

EDID Button

For setting the EDID on the inputs (see Step 6: Operate the VS-88H2).

OUTPUT/INPUT

7-segment LED Display

Displays the selected inputs switched to the outputs (marked above each input).

Feature

Function

INPUT HDMI Connectors

Connect to HDMI sources (from 1 to 8).

OUTPUT HDMI Connectors

Connect to HDMI acceptors (from 1 to 8).

PROG Mini USB Port

Use for firmware upgrade or communication (connecting to a PC or a serial

controller).

SETUP DIP-Switches

N/A

5V/2A USB Port

Can be used to charge an external device.

RESET Button

Press and hold to reset settings to factory default values.

ETHERNET RJ-45 Port

Connect to your LAN.

OPTIONAL Terminal Block Connectors

N/A

RS-232 3-pin Terminal Block Connectors

Connect to a PC or a serial controller.

Mains Power Connector

Connect to the mains power.

Mains Power Fuse

Fuse for protecting the device.

Mains Power Switch

Switch for turning the device on or off.

Step 3: Install the VS-88H2

To rack mount the machine, attach both ear brackets (by removing the screws from each side of

the machine and replacing those screws through the `ear brackets) or attach the rubber feet and

place the machine on a table.

Step 4: Connect the inputs and outputs

Always switch OFF the power on each device before connecting it to your VS-88H2. For best results, we recommend that you

always use Kramer high-performance cables to connect AV equipment to the VS-88H2.

Step 5: Connect the power

Connect the power cord to VS-88H2 and plug it into the mains electricity.

Safety Instructions (See www.kramerav.com for updated safety information)

Caution:

•For products with relay terminals and GPI\O ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.

•There are no operator serviceable parts inside the unit.

Warning:

•Use only the power cord that is supplied with the unit.

•Disconnect the power and unplug the unit from the wall before installing.

•Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only.

•To ensure continuous risk protection, replace fuses only according to the rating specified on the product label which located on the bottom of the unit.

Step 6: Operate the VS-88H2

Web pages:

RS-232 and Ethernet:

RS-232/Ethernet

Baud Rate:

115,200

Parity:

None

Data Bits:

Command Format:

ASCII Protocol

3000

Stop Bits:

Example (Route input 1 to output 1):

#VID1> 1<cr>

Ethernet Parameters

IP Address:

192.168.1.39

Default TCP Port #:

5000

Subnet Mask:

255.255.0.0

Default UDP Port #:

50000

Default Gateway:

192.168.0.1

Full Factory Reset

Front panel:

Front panel buttons: power off the device, press and hold the

LOCK, EDID and STO buttons simultaneously for 3 seconds

while powering the device, and then release.

Protocol 3000:

“#factory” command.

Web Pages:

In the Device Settings page, click Reset.

Front panel buttons:

The 7-segment display shows the status of VS-88H2 during normal operation and displays device information.

Generally, to switch an input to an output, select the switching mode and then:

•Press an output button and then an input button.

•Press ALL to route a selected input to all outputs.

To set the switching mode:

•Press VIDEO to switch the video signal of a selected input to the selected output.

•Press D-AUDIO (HDMI embedded audio signal) to switch the digital audio signal of a selected input to the selected

output.

•Press VIDEO +D-AUDIO simultaneously to switch the video and digital audio signals of a selected input to the

selected output.

•Press MUTE/PATTERN to switch the pattern signal to the selected output. Use the input buttons to select which

pattern you want to display. (Each input button is associated with a unique pattern).

•Press ARC, an input button, and then an output button. The selected output port sources its ARC to the selected input

port ARC.

7-segment display example

When in Video mode, the 7-segment display shows the input-output status:

In this example: Input 1 is routed to output 1, input 3 is routed to output 2, input 2 is routed to outputs 3 and 7, a pattern is

routed to output 4, output 5 is set to mute, and so on.

Read and store the EDID via the front panel buttons

To read the EDID from the output:

1. Press EDID+STO.

The EDID and STO button LEDs light. The 7-segment display shows the current EDID status.

2. Press one or more input buttons or press ALL, the corresponding 7-segment LEDs flash.

3. Press an output button that is connected to a display. The 7-segment LEDs show the output number from which the

EDID is read.

4. Press EDID. Wait approx. 5 seconds. The EDID of the display is copied to the input port/s and the device exits EDID

mode.

To revert to the default EDID:

1. Press EDID+STO.

The EDID and STO button LEDs light. The 7-segment display shows the current EDID status.

2. Press one or more input buttons or press ALL, the corresponding 7-segment LEDs flash.

3. Press MUTE/PATTERN. The 7-segment LED flashes and shows “d”.

4. Press EDID. Wait approx. 5 seconds. The default EDID is copied to the input port/s and the device exits EDID mode.

Use the VS-88H2 Web pages

Switching: Set input and output parameters (HDCP support, switching speed, and so on), select switching modes, set

test patterns, perform switching operations, and so on.

Device Settings: View device parameters (model, name, serial number, and so on), set network parameters, perform

firmware upgrade, and reset to factory defaults.

Authentication: Set password for Admin.

Timeout Settings: Set the timeout per output when no signal is detected.

Auto Switch Settings: Set switch mode (manual, last connected, or priority), select the ports included in the last

connected mode, and set the priority order.

Step-in Settings: Control Step-in devices that are connected to the inputs. Select a device (that is connected to a

VS-88H2 input), set the input signal type, and set the outputs to which the input signal is switched when the Step-in

button is pressed (on the Step-in device).

EDID Management: Set the default EDID or read the EDID from an output or file to one or more of the inputs.

Andere Handbücher für VS-88H2

Andere Kramer Matrix-Umschalter Handbücher

Kramer

Kramer Sierra Video 4848V5xl Bedienungsanleitung

Kramer

Kramer VS-44HDCP Bedienungsanleitung

Kramer

Kramer VS-806YC Bedienungsanleitung

Kramer

Kramer VS-42H2 Bedienungsanleitung

Kramer

Kramer VS-1616SDI Bedienungsanleitung

Kramer

Kramer VS-44HN Bedienungsanleitung

Kramer

Kramer VS-1616DN-EM Bedienungsanleitung

Kramer

Kramer 88DE Bedienungsanleitung

Kramer

Kramer Sierra Pro XL 1608V3S Bedienungsanleitung

Kramer

Kramer XL 1608V2 Bedienungsanleitung

Kramer

Kramer 20-04400030 Bedienungsanleitung

Kramer

Kramer Sierra Pro XL 1208V3S Bedienungsanleitung

Kramer

Kramer VS-88FO Bedienungsanleitung

Kramer

Kramer VS-162AV Bedienungsanleitung

Kramer

Kramer VS-1202YC Bedienungsanleitung

Kramer

Kramer 3216HD Bedienungsanleitung

Kramer

Kramer VS-6464DN-EM Bedienungsanleitung

Kramer

Kramer VS-3232DN Bedienungsanleitung

Kramer

Kramer Sierra Video 1204V5 Bedienungsanleitung

Kramer

Kramer VP-12x8 Bedienungsanleitung

Kramer

Kramer Sierra Video 3232SXL Bedienungsanleitung

Kramer

Kramer VS-88HDCPxl Bedienungsanleitung

Kramer

Kramer Sierra Video 3216V5S Bedienungsanleitung

Kramer

Kramer VS-5x5 Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8811 Bedienungsanleitung

Optimus

Optimus Compact Bedienungsanleitung