Kramer VM-1010 Bedienungsanleitung
KRAMER ELECTRONICS LTD.
USER MANUAL
MODELS:
VM-1010
Programmable Video
Distributor
VM-1021
1:20 Video Distributor
VM-1055
V
ideo Component Distributor
VM-54
V
ideo/Component Distributor
A
mplifier
P/N: 2900-300182 Rev 1
VM-1010, VM-1021, VN-1055, VM-54 – Contents i
Contents
1Introduction 1
2Getting Started 2
2.1Achieving the Best Performance 2
3Installing in a Rack 3
4Your VM-1010 4
4.1Overview 4
4.2Connecting the VM-1010 7
4.3VM-1010 Technical Specifications 8
5Your VM-1021 9
5.1Overview 9
5.2Connecting the VM-1021 12
5.3VM-1021 Technical Specifications 13
6Your VM-1055 14
6.1Overview 14
6.2Connecting the VM-1055 17
6.3VM-1055 Technical Specifications 18
7Your VM-54 19
7.1Overview 19
7.2Connecting the VM-54 22
7.3VM-54 Technical Specifications 23
Figures
Figure 1: VM-1010 Programmable Video Distributor Front Panel 5
Figure 2: VM-1010 Programmable Video Distributor Rear Panel 6
Figure 3: Connecting the VM-1010 7
Figure 4: VM-1021 1:20 Video Distributor Front Panel 10
Figure 5: VM-1021 1:20 Video Distributor Rear Panel 11
Figure 6: Connecting the VM-1021 12
Figure 7: VM-1055 Video Component Distributor Front Panel 15
Figure 8: VM-1055 Video Component Distributor Rear Panel 16
Figure 9: Connecting the VM-1055 17
Figure 10: VM-54 Video/Component Distributor Amplifier Front Panel 20
Figure 11: VM-54 Video/Component Distributor Amplifier Rear Panel 21
Figure 12: Connecting the VM-54 22
VM-1010, VM-1021, VN-1055, VM-54 - Introduction 1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront the video, audio, presentation, and broadcasting
professional on a daily basis. In recent years, we have redesigned and upgraded
most of our line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer VM-1010, VM-1021, VN-1055 or
VM-54 distribution amplifier that is ideal for the following typical applications:
•Broadcast, production, or presentation systems requiring high-quality signal
distribution
•Schools, retail, sports bars, other point-of-sale and CCTV applications
•Computer RGB or component video distribution
2 VM-1010, VM-1021, VN-1055, VM-54 - Getting Started
2 Getting Started
We recommend that you:
•Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
•Review the contents of this user manual
•Use Kramer high-performance, high-resolution cables
•Use only the power cord that is supplied with this machine
Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
•Use only good quality connection cables to avoid interference, deterioration
in signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
•Do not secure the cables in tight bundles or roll the slack into tight coils
•Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
•Position your Kramer product away from moisture, excessive sunlight and
dust
Caution: There are no operator serviceable parts inside the unit
Warning: Disconnect the power and unplug the unit from the wall
before installing
Your amplifier is pre-calibrated at the factory for
transparent operation. Re-tuning it can upset signal
transparency.
Do not attempt to adjust the LEVEL trimmers without
using accompanying standard calibrated oscilloscope
or waveform monitor!
i
!
VM-1010, VM-1021, VN-1055, VM-54 - Installing in a Rack 3
3 Installing in a Rack
This section provides instructions for rack mounting the 1U devices. 2U and 3U
devices use the same procedure with longer rack “ears” and additional screws.
4 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010
4 Your VM-1010
This section describes the VM-1010 Programmable Video Distributor.
4.1 Overview
The VM−1010 is a highperformance distribution amplifier for composite video. It
can also be configured as a 1:5 distribution amplifier for sVideo (Y/C) signals and
has controls to compensate for signal losses inherent in long cable runs.
The VM−1010 is designed for studio and other demanding applications. It has two
looping video inputs, each splitting to 5 outputs. The user may select 2x1:5 or 1:10
operation via front panel control switches. Several VM-1010 units may be chained
through the looping inputs. Output signals are DC or AC coupled (user selectable)
for maximum flexibility.
The unit features:
•High bandwidth of 235MHz (3dB)
•Dual-mode configuration either as a 1:10 (composite) or a 1:5 (sVideo) DA
•Grouped level (gain) and EQ (peaking) controls
•A video AC/DC coupling selection
•Looping inputs
•Selectable input signal termination
•Standard 19” rack mount size of 1U
Figure 1 and Figure 2 define the unit.
VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010 5
VM-1010, VM-1021, VN-1055, VM-54 – The VM-1010 Programmable Video Distributor 5
Figure 1: VM-1010 Programmable Video Distributor Front Panel
# Feature Function
1 POWER Switch Illuminated switch for turning the device on and off
2 CHANNEL B EQ Trimmer Controls cable equalization of channel B outputs
3 CHANNEL B LEVEL Trimmer Controls the video level of channel B outputs
4 MODE Button Selects either 1:10 or 2 x 1:5 operation
5 CHANNEL A EQ Trimmer Controls cable equalization of channel A outputs
6 CHANNEL A LEVEL Trimmer Controls the video level of channel A outputs
6 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010
Figure 2: VM-1010 Programmable Video Distributor Rear Panel
# Feature Function
7
CHANNEL A
OUT BNC Connectors (1A-5A) 5 amplified and buffered video outputs
8 INPUT A BNC Connector Connects to a composite/component/YC/analog sync video source A
9 75Button Selects "75" or "HI-z" impedance (for looping select "Hi-z")
10 DC Button Selects DC coupling when pushed
11 LOOP BNC Connector Provides video looping capability to increase number of outputs
12
CHANNEL B
INPUT B BNC Connector Connects to a composite/component/YC/analog sync video source B
13 75Button Selects "75" or "HI-z" impedance (for looping select Hi-z)
14 DC Button Selects DC coupling when pushed
15 LOOP BNC Connector Provides video looping capability to increase number of outputs
16 OUT BNC Connectors (1B-5B) 5 amplified and buffered video outputs.
17 Power Connector AC connector and fuse enabling power supply to the unit
6VM-1010, VM-1021, VN-1055, VM-54 – The VM-1010 Programmable Video Distributor
VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010 7
4.2 Connecting the VM-1010
Always switch off the power to each device before connecting it to your
VM-1010. After connecting your VM-1010, connect its power and then
switch on the power to each device.
To connect the VM-1010 as illustrated in the example in Figure 3:
1. Connect up to two video sources (for example composite video players) to
CHANNEL A INPUT A and CHANNEL B INPUT B BNC connectors.
2. Connect up to five video acceptors (for example, composite video recorders)
to each channel.
3. As required, select the coupling and termination, the MODE (2x1:5 or 1:10)
and adjust the EQ and LEVEL of each channel as needed.
Figure 3: Connecting the VM-1010
i
8 VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010
Note:
•Terminate unused inputs to 75, and terminate active inputs at the
connecting source
•Remember, the output signal format matches the input signal format (for
example, if the input is composite, the output is composite)
•All signal cables to each device should be of equal length (for example, the
R,G,B cables between a camera and the amplifier should be of equal length)
4.3 VM-1010 Technical Specifications
INPUTS: 2 composite/component video, looping, 1Vpp/75on
BNC connectors with termination switch
OUTPUTS: 2x5 composite/component video, 1Vpp/75on BNC
connectors
MAX. VIDEO OUTPUT: 1.8Vpp
VIDEO BANDWIDTH (-3DB): 235MHz
DIFF. GAIN: 0.2%
DIFF. PHASE: 0.04Deg
K-FACTOR: <0.05%
VIDEO S/N RATIO: 77dB
NON-LINEARITY: 0.2%
CONTROL: Level: 1.4dB to +2.5dB, EQ.: 0 to +2.5dB @4.4MHz
COUPLING: DC or AC (user selectable)
POWER SOURCE: 230V AC, 50/60Hz (115V USA), 10.3VA
OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F)
HUMIDITY: 10% to 90%, RHL non-condensing
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable
WEIGHT: 1.98kg (4.4lbs) approx.
ACCESSORIES: Power cord
Specifications are subject to change without notice at http://www.kramerelectronics.com
Andere Handbücher für VM-1010
1
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere Kramer Medienkonverter Handbücher
Kramer
Kramer VP-472 Bedienungsanleitung
Kramer
Kramer VM-4DT Bedienungsanleitung
Kramer
Kramer VM-4UX Bedienungsanleitung
Kramer
Kramer VM-50AN Bedienungsanleitung
Kramer
Kramer VM-80HP Bedienungsanleitung
Kramer
Kramer VM-100CB Bedienungsanleitung
Kramer
Kramer MV-5 Bedienungsanleitung
Kramer
Kramer VP-437N Bedienungsanleitung
Kramer
Kramer VP-724DS Bedienungsanleitung
Kramer
Kramer KIT-500 Bedienungsanleitung
Kramer
Kramer VP-25xl Bedienungsanleitung
Kramer
Kramer VM-400HDCP Bedienungsanleitung
Kramer
Kramer FC-10Dxl Bedienungsanleitung
Kramer
Kramer VP-409 Bedienungsanleitung
Kramer
Kramer VA-256P Bedienungsanleitung
Kramer
Kramer KDS-EN7 Bedienungsanleitung
Kramer
Kramer PT-1SPDIF Bedienungsanleitung
Kramer
Kramer VM-80VN Bedienungsanleitung
Kramer
Kramer FC-331A Bedienungsanleitung
Kramer
Kramer KDS-EN7 Bedienungsanleitung
