KWIK GOAL FUSION 2B3806SW Bedienungsanleitung

ASSEMBLY INSTRUCTIONS FOR SWIVEL WHEELS

1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,

notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or

damp packaging may damage contents.

2. Read through entire instruction before beginning assembly and installation.

NZ346 Rev. 09/30/22

(A)”

Rubber Pad (8)

(Part# VZ654)

Hairpin Cotter (4)

(Part# TZ351)

Swivel Wheel (4)

(Part# VZ629)

Cable Lanyard (4)

(Part# VZ653)

12”

Parts

Any modifications to this or any Kwik Goal product will void any and all warranties.

***CAUTION***

This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES

and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings

must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use

must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal

Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use

this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.

All warning and safety labels included with this product must be visible at all times.

Swivel Wheel Mounting Bracket (4)

(Part# UZ1356)

Mounting Bracket Pin (4)

Part# Dim (A) Goal Model Number

TZ347 3-5/16” 2B3306SW 2B3406SW 2B3706SW -

TZ348 5-5/8” 2B2001SW 2B3806SW 2B9006SW 2B9004SW

TZ378 4-3/16” 2B3006SW - - -

140 Pacific Drive Quakertown, PA 18951

800-531-4252 Kwikgoal.com

2019 Kwik Goal Ltd. ©

5. Always exercise extreme caution when moving goals and provide adequate

manpower to move goals of varied sizes and weights. Movable soccer goals

should only be moved by authorized personnel.

4. Always instruct players, managers, coaches, trainers, teachers, maintenance

workers and all other personnel who might come in contact with the goal,

on the safe handling of and potential dangers associated with movable

soccer goals.

6. NEVER allow anyone to climb on the net or goal framework.

7. Movable soccer goals should only be used on LEVEL fields, NEVER on a slope

or hill area.

2. Safety/Warning labels must be clearly visible.

8. Remove nets when goals are not in use.

9. Most of the tip-over injuries occurred when goals were unattended. Anchor

or chain one goal to another or to nearby fence posts, dugouts, or any other

similar sturdy fixture when not in use. If this is not practical, store movable

soccer goals in a place where children cannot have access to them.

10. Fully disassemble goals for seasonal storage.

3. Securely anchor movable soccer goals at ALL times.

IMPORTANT GOAL SAFETY INSTRUCTIONS

READ CAREFULLY

1. Check for structural integrity and proper connecting hardware before every

use. Replace damaged or missing parts or fasteners immediately.

NZ346 Rev. 09/30/22

140 Pacific Drive Quakertown, PA 18951

800-531-4252 Kwikgoal.com

2019 Kwik Goal Ltd. ©

Swivel Wheel

Mounting Bracket

5/16” X 1” Hex Bolt

5/16” Flat Washer

Swivel Wheel

5/16” Lock Nut

4. Attach swivel wheel brackets to swivel wheels.

Assembly Tools

1/2” & 3/4”

Wrenches

Phillips Screwdriver

Ratchet with

1/2” & 3/4”

Sockets

AND

Note: Hardware may be packaged separately

in one or more boxes. Open all packages

1/2” Lock Nut (Part# TZ349) (4)

5/16“ x 1” Hex Bolt (Part# TZ330) (16)

Hardware

5/16” Flat Washer (Part# TZ4) (16)

5/16” Lock Nut (Part# TZ5) (16)

before beginning assembly.

3. Apply rubber pads to swivel wheel mounting

brackets at the center of location shown.

Peel Off Backing

Rubber Pad

Swivel Wheel

Mounting Bracket

Rubber Pad

5. Attach mounting bracket pin to swivel wheel bracket.

To tighten lock nut, insert a phillips screwdriver in

hole on mounting bracket pin. Orient hole to

bracket as shown.

Mounting Bracket Pin

1/2” Lock Nut

Swivel Wheel & Bracket

9/16