KWIK GOAL FUSION 25B386512 Bedienungsanleitung

NZ474 Rev 01/26/23

Any modifications to this or any Kwik Goal product will void any and all warranties.

***CAUTION***

This goal has been designed to be used for the game of soccer only. Goal posts must be anchored AT ALL TIMES

and shall be secured against overturning. Do not climb on the net or goal framework at any time! All fastenings

must be checked to insure they are fully tightened before and after each use of this product. Goal posts not in use

must be disassembled and properly stored in a safe, secure area (See included Guidelines for Movable Soccer Goal

Safety.). Assembled goal posts should not be left unattended. Remove nets when goals are not in use. Do not use

this equipment during the threat of high winds. Goal posts should be checked for safety before and after each use.

All warning and safety labels included with this product must be visible at all times.

2. Read through entire instruction before beginning assembly and installation.

ASSEMBLY INSTRUCTIONS FOR 25B386512 CANADIAN FUSION GOAL

1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,

notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or

damp packaging may damage contents.

NOTE: Components may be packaged in one or more additional boxes.

Base (2)

(Part# UZ1289)

70”

Right Post (1)

(Part# UZ1287)

66”

Left Post (1)

(Part# UZ1701)

66”

Date of

manufacture sticker

136”

Crossbar (2)

(Part# UZ1703)

Parts

140 Pacific Drive Quakertown, PA 18951

800-531-4252 Kwikgoal.com

2022, Rev 2023 Kwik Goal Ltd. ©

4. Always instruct players, managers, coaches, trainers, teachers, maintenance

workers and all other personnel who might come in contact with the goal,

on the safe handling of and potential dangers associated with movable

soccer goals.

2. Safety/Warning labels must be clearly visible.

10. Fully disassemble goals for seasonal storage.

1. Check for structural integrity and proper connecting hardware before every

use. Replace damaged or missing parts or fasteners immediately.

5. Always exercise extreme caution when moving goals and provide adequate

manpower to move goals of varied sizes and weights. Movable soccer goals

should only be moved by authorized personnel.

8. Remove nets when goals are not in use.

6. NEVER allow anyone to climb on the net or goal framework.

3. Securely anchor movable soccer goals at ALL times.

9. Most of the tip-over injuries occurred when goals were unattended. Anchor

or chain one goal to another or to nearby fence posts, dugouts, or any other

similar sturdy fixture when not in use. If this is not practical, store movable

soccer goals in a place where children cannot have access to them.

READ CAREFULLY

7. Movable soccer goals should only be used on LEVEL fields, NEVER on a slope

or hill area.

IMPORTANT GOAL SAFETY INSTRUCTIONS

WARNING

140 Pacific Drive Quakertown, PA 18951

800-531-4252 Kwikgoal.com

2019 Kwik Goal Ltd. © NZ474 Rev 01/26/23

Hardware

3/8“ x 1-3/4” Hex Bolt (Part# TZ227) (28)

3/8“ Flat Washer (Part# TZ60) (38)

3/8” Lock Nut (Part# TZ197) (4)

3/8" Square Nut (Part# TZ247) (10)

5/16" Eyebolt (Part# TZ270) (2)

Note: Hardware may be packaged separately

3/8“ Lock Washer (Part# TZ65) (34)

5/16" Flat Washer (Part# TZ269) (2)

5/16” Lock Nut (Part# TZ5) (2)

in one or more boxes. Open all packages

3/8" x 7/8" Hex Bolt (Part# TZ249) (10)

before beginning assembly.

Assembly Tools

9/16

1/2”, 9/16” & 3/4”

Wrenches

Ratchet with

1/2”, 9/16” & 3/4”

Sockets

Scissors

AND

Chain (4)

w/ Snap Link & Anchor Plate

(Part# UZ846)

Backstay (2)

(Part# VZ329P1)

Backstay Brace (2)

(Part# VZ328P2)

Post Corner (2)

(Part# UZ998)

Crossbar Corner (4)

(Part# UZ989)

Channel Spacer (12)

(Part# UZ812)

Net (1)

(Part# 3B6823)

Post Brace (2)

(Part# UZ737)

Net Strap (1)

(Part# 10B4406)