KWIK GOAL 2F501 Bedienungsanleitung

NZ261 Rev. 09/26/18

ASSEMBLY INSTRUCTIONS FOR 2F501 FIELD HOCKEY GOAL

1. Unpack all parts and check for damage that may have occurred during shipping. If damage has occurred,

notify Kwik Goal immediately. Lay out all parts. Remove all cardboard and packaging immediately. Wet or

damp packaging may damage contents.

2. Read through entire instruction before beginning assembly and installation.

3. A minimum of two qualified persons are required to assemble this goal.

NOTE: Components may be packaged in one or more additional boxes.

140 Pacific Drive Quakertown, PA 18951

(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869

Visit our website @ kwikgoal.com

2011 Rev 2018 Kwik Goal Ltd.

Right Arm (1)

2F501(Part# UZ733)

Left Arm (1)

2F501(Part# UZ738)

End

View

Crossbar (1)

2F501(Part# UZ734)

***CAUTION***

This equipment has been designed to be used for the game of field hockey only. Field equipment

must be anchored AT ALL TIMES and shall be secured against overturning. Do not climb on the net

or equipment framework at anytime! All fastenings must be checked to insure they are fully

tightened before and after each use of this product. Equipment not in use must be disassembled

and properly stored in a safe, secure area. Assembled field equipment should not be left

unattended. Remove nets when equipment is not in use. Do not use this equipment during the

threat of high winds. Field equipment must be checked for safety before and after each use. All

warning and safety labels included with this product must be visible at all times. Any modifications

to this or any Kwik Goal product will void any and all warranties.

136”

Side Board (2)

(Part# WZ1176-03)

NZ261 Rev. 09/26/18

140 Pacific Drive Quakertown, PA 18951

(P) 215-536-2200 / (P) 800-531-4252 / (F) 215-536-4309 / (F) 800-778-8869

Visit our website @ kwikgoal.com

2018 Kwik Goal Ltd.

IMPORTANT GOAL SAFETY INSTRUCTIONS

READ CAREFULLY

1. Check for structural integrity and proper connecting hardware before every

use. Replace damaged or missing parts or fasteners immediately.

2. Safety/Warning labels must be clearly visible.

3. Securely anchor moveable goals at ALL times.

4. Always instruct players, managers, coaches, trainers, teachers, maintenance

workers and all other personnel who might come in contact with the goal,

on the safe handling of and potential dangers associated with moveable

goals.

5. Always exercise extreme caution when moving goals and provide adequate

manpower to move goals of varied sizes and weights. Moveable goals

should only be moved by authorized personnel.

6. NEVER allow anyone to climb on the net or goal framework.

7. Moveable goals should only be used on LEVEL fields, NEVER on a slope or

hill area.

8. Remove nets when goals are not in use.

9. Most of the tip-over injuries occurred when goals were unattended. Anchor

or chain one goal to another or to nearby fence posts, dugouts, or any other

similar sturdy fixture when not in use. If this is not practical, store moveable

goals in a place where children cannot have access to them.

10. Fully disassemble goals for seasonal storage.

WARNING

Hardware

Note: Hardware may be packaged separately

in one or more boxes. Open all packages

before beginning assembly.

1/4” x 2” Eye Bolt (Part# TZ23) (2)

1/4” Lock Nut (Part# TZ19) (2)

1/4“ Flat Washer (Part# TZ147) (2)

3/8” X 1-1/4” Hex Bolt (Part# TZ59) (4)

3/8” X 2-1/2” Hex Bolt (Part# TZ165) (4)

3/8” Lock Nut (Part# TZ197) (4)

3/8” Flat Washer (Part# TZ60) (12)

3/8” Lock Washer (Part# TZ65) (4)

7/16” X 3-1/2”Bolt Carriage (Part# TZ230)(4)

7/16” Hex Nut (Part# TZ211) (4)

7/16” Lock Washer (Part# TZ210) (4)

7/16” Flat Washer (Part# TZ171) (4)

Assembly Tools

9/16

7/16”, 9/16”, 5/8” & 3/4”

Wrenches

Ratchet with

7/16”, 9/16”, 11/16” & 3/4”

Sockets

AND

Secure Net Clip

Driver (1)

(Part# VZ140)

Back Board (1)

2F501(Part# UZ735)

Net (1)

2F501(Part# 3F501)

Ground Anchor (4)

Includes Hex Bolt

and Flat Washer

(Part# 10B103 Set of 4)

16”

Ground

Anchor Peg (4)

(Part# 10B1404 Pack of 4)

Anchor Plate (4)

(Part# UZ736)

Anchor Bag (2)

(Part# 10B1605)

Channel Spacer (2)

(Plastic)

(Part# UZ812)

Secure Net Clip (50)

(Part# 10B3401 Pack of 100)