La Crosse Technology 308-1451 Bedienungsanleitung

INTRODUCTION: The Wireless Forecast Station features radio-controlled time, dual time alarms,

sunrise/sunset, barometric pressure in numbers, and pressure graph with 12-hour history, forecast icons,

indoor/outdoor temperature and humidity with high and low alarms. Four forecast Icons based on

temperature & air pressure readings suggest what kind of weather to expect and what to wear. This

Forecast Station will never keep you guessing on current or future weather conditions.

FORECAST STATION:

OUTDOOR TEMPERATURE/HUMIDITY TRANSMITTER: TX14TH

Wireless Forecast Station

Model: 308-1451 | Instruction Manual

TABLE OF CONTENTS:

INTRODUCTION 1

FORECAST STATION 1

OUTDOOR TEMPERATURE/HUMIDITY TRANSMITTER TX14TH 1

FEATURES 3

INITIAL SETUP 3

WWVB RADIO CONTROLLED TIME 4

WWVB RECEPTION ICON 4

MANUAL SIGNAL SEARCH 4

FUNCTION BUTTONS 5

PROGRAM MENU 5

WWVB RECEPTION ON/OFF 5

TIME ZONE 5

DAYLIGHT SAVING TIME INDICATOR 6

12 OR 24 HOUR TIME FORMAT 6

FAHRENHEIT/CELSIUS 6

SET TIME 6

SET CALENDAR 6

CITY SELECTION 7

TIME ALARM SET 9

DEACTIVATE ALARM 9

SNOOZE 9

FROST ALARM 9

OUTDOOR TEMPERATURE ALARMs 10

TEMPERATURE TREND ICONS 10

CHANNEL SCROLL 10

ABSOLUTE PRESSURE NUMBER 11

UNIT OF MEASURE 11

PRESSURE HISTORY 11

12-HOUR PRESSURE GRAPH 11

WEATHER FORECAST ICONS 12

FORECAST TENDANCY ARROWS 12

CLOTHING INDEX 12

MIN/MAX TEMPERATURE/HUMIDITY DATA 13

RESET 13

LOW BATTERY 13

MULTIPLE OUTDOOR TRANSMITTERS 13

CHANNEL SCROLL 13

OTHER FORECAST STATION ICONS 14

INSTALL BATTERIES IN OUTDOOR TRANSMITTER 15

INSTALL BATTERIES IN THE FORECAST STATION 15

CARE AND MAINTENANCE 16

POSITION OUTDOOR TRANSMITTER 16

POSITION FORECAST STATION 16

SPECIFICATIONS 17

ACCURACY 17

WARRANTY 18

FCC DISCALIMER 19

APPENDIX A: CITY LIST 20

FEATURES:

Atomic Clock: 7 Time Zones（AST, EST, CST, MST, PST,AKST, HAST

Calendar (Month/date,2000-2099 Default Year 2010)

Time (hour/minute)

Indoor Temperature/Humidity

Wireless Outdoor Temperature/Humidity

C/F selectable

Alarm and snooze Function

Weather Forecast: Sunny、Slightly Cloudy、Cloudy、Rain、or Snow

History chart for Pressure

Low Battery indicator: Main unit, Transmitter (Display when out of battery)

Temperature and humidity trends

High/Low Daily records

Comfort indicator

250 major US cities sunrise / sunset

Clothing index

•Low battery icon for Forecast Station and Transmitter

•Sits on desktop or tabletop

•308-1451 requires 3 "AA" Alkaline batteries (not included)

•TX14TH requires 2 "AA" Alkaline batteries (not included)

INITIAL SET UP:

Note: The Forecast Station will display the fisherman icon, lines etc., before batteries are installed.

These items are painted on the screen.

1. Insert 3 AA batteries (not included) into the Forecast station (see Install Batteries in the Forecast

Station). The Forecast Station will light up and show, pressure, indoor temperature, humidity and

channel 1.

2. Insert 2 fresh AA batteries into the transmitter, observing the correct polarity (see Install Batteries in

the Outdoor Transmitter).

Note: The CH switch is set to Channel 1 by default. Confirm channel 1 is selected.

3. Keep the transmitter 5-10 feet from the Forecast station for 15 minutes to establish a good

connection.

4. Within 3 minutes the station will beep and the outdoor temperature should be shown on the Forecast

station. If the outdoor temperature does not show after 3 minutes remove power from the transmitter

and the Forecast station for 60 seconds and start again from step 1.

5. If the outdoor temperature does not show up after a second attempt, please slide open the battery

cover of the outdoor transmitter to reveal the TX button. Push down on the TX button for 3 seconds to

send a wireless signal to the Forecast Station.

6. Hold the CH button on the forecast station to start the search for the transmitter signal.

7. For optimum 433 MHz transmission, the outdoor transmitter should be placed a distance of no more

than 200 feet (60 meters, open air) from the Forecast station.

Do Not Mix Old and New Batteries

Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries

WWVB RADIO CONTROLLED TIME

The NIST radio station, WWVB, is located in Ft. Collins, and transmits the exact time signal continuously

throughout the United States at 60 kHz. The signal can be received up to 2,000 miles away through the

internal antenna in the Forecast station. However, due to the nature of the Earth’s Ionosphere, reception

is very limited during daylight hours. The Forecast station will search for a signal every night when

reception is best. The WWVB radio station derives its signal from the NIST Atomic Clock in Boulder,

Colorado. A team of atomic physicists continually measures every second of every day to an accuracy of

ten billionths of a second a day. These physicists have created an international standard, measuring a

second as 9,192,631,770 vibrations of a Cesium 133 atom in a vacuum. This atomic clock regulates the

WWVB transmitter.

WWVB RECEPTION ICON with full signal strength will appear on screen in front of the date when

the reception of time is successful.

The tower icon will show solid when the Forecast station has received the WWVB signal.

No tower icon is shown. The Forecast station was unable to receive a signal at this time.

Reposition the Forecast station for better signal reception or try again at bedtime.

The Forecast station will start searching at UTC: 07:00 and if no reception on the first attempt they

will try again at 08:00, 09:00 and 10:00. Each attempt will be at least 2 minutes and the most will be

10 minutes.

If there is no signal or too much interference the receiver will only be on for 2 minutes.

If the signal is good it may catch a signal in ABOUT 2-3 minutes.

If the signal is marginal it will try to catch a signal for up to 10 minutes.

IMPORTANT: When operating on a/c power, the backlight and USB charge port will turn off while the

Forecast station searches for the WWVB signal, to avoid interference. Both features will return after

the 2-10 minute search which occurs during the late night or early morning hours.

Note: In case the Forecast station is not able to detect the WWVB-signal (disturbances, transmitting

distance, etc.); the time may be manually set.

WWVB Manual Signal Search:

Normal mode: Hold the + and - buttons together for 3 seconds to enter manual search.

Reception mode: Hold the + and - buttons together for 3 seconds to exit searching for the WWVB signal.

Note: In case the Wireless Forecast Station is not able to detect the WWVB-signal (disturbances,

transmitting distance, etc.); the time can be manually set by following the program menu.

Recommended distance to any interfering sources like computer monitors or TV sets is a minimum of

6 feet (2 meters).

Within ferro-concrete rooms (basements, superstructures), the received signal is naturally weakened.

In extreme cases, please place the unit close to a window and/ or point its front or back towards the

Fort Collins, Colorado, transmitter.

During nighttime, the atmospheric disturbances are usually less severe and reception is possible in

most cases. A single daily reception is adequate to keep the accuracy deviation below 1 second.

Note: In case the Forecast station is not able to detect the WWVB-signal (disturbances, transmitting

distance, etc.), the time and date can be manually set (see “program menu”).

FUNCTION BUTTONS:

PROGRAM MENU:

The SET button will moves through the items in the program menu. The + or - button will change these

values.

WWVB reception ON or OFF

Time Zone (Seven Time Zones)

Daylight Saving Indicator

12/24 hour time format

Fahrenheit/Celsius selection

Manual time set (Hour, Minutes, Seconds)

Calendar set (Year, Month, Date)

WWVB RECEPTION:

The WWVB time reception defaults to ON. To turn the WWVB reception OFF:

1. Hold the SET button for 5 seconds.

2. WWVB and ON will flash in the time display.

3. Press and release the + or - button to turn this OFF.

4. Confirm with the SET button and move to the Time Zone.

TIME ZONE:

This station offers seven time zones listed in letter format (default is EST):

AST Atlantic Time

EST Eastern Time

CST Central Time

MST Mountain Time

PST Pacific Time

AKT Alaskan Time

HAT Hawaiian Time

1. EST will flash next to the date.

2. Press and release the + or - button to select a different Time Zone.

3. Confirm with the SET button and move to Daylight Saving Indicator.

WWVB

TIMEZONE

EST

DAYLIGHT SAVING INDICATOR:

DST will default to the ON position as most of the country observes the DST change. If you live in an

area does not observe the DST change, switch this to the OFF position.

1. DST and ON will flash in the time display.

2. Press and release the + or - button to turn DST to OFF.

3. Confirm with the SET button and move to 12/24 hour time format.

12 OR 24 HOUR TIME FORMAT:

The Time may be displayed in 12-hour or 24-hour format. Default is 12-hour time.

Note: When in 12-hour format AM or PM will show in front of the hour.

1. 12Hrwill flash in the time display.

2. Press and release the + or - button to select 24-hour time.

3. Confirm with the SET button and move to Fahrenheit/Celsius.

FAHRENHEIT/CELSIUS:

Select to have temperature displayed in Fahrenheit or Celsius. Default is Fahrenheit.

1. °F will flash in the time display.

2. Press and release the + or - button to select Celsius.

3. Confirm with the SET button and move to Set Time.

SET TIME:

To set the time manually:

1. The hour digit will flash.

2. Press and release the + or - button to select the hour.

3. Press and release the SET button to move to the minutes.

4. The minute’s digit will flash.

5. Press and release the + or - button to set the minutes.

6. Press and release the SET button to move to the seconds.

7. The seconds’ digit will flash.

8. Press and release the + or - button to reset the seconds to zero.

9. Confirm with the SET button and move to Set Calendar.

SET CALENDAR:

The date default of the Forecast station is 1. 1. 2010.

To set the calendar:

1. The year will flash.

2. Press and release the + or - button to set the year

(between year 2010-2039).

3. Press the SET button again to confirm and to enter the

month setting.

4. The month will flash.

5. Press and release the + or - button to set the month.

6. Press the SET button again to confirm and enter the date setting.

7. The date will flash.

8. Press and release the + or - button to set the date.

9. Confirm all calendar settings with the SET button to confirm and exit the program menu.

Note: If no buttons are pressed for 20 seconds, set mode will time out and return to live display mode,

reflecting whatever adjustments were made before it timed out.

Note: Press the + or - button once to adjust by 1 unit or hold for fast scroll adjustment.

DST

12Hr

°F

USA

ANC

CITY SELECTION-SUNRISE/SUNSET TIMES:

Note: Preset City abbreviations are at the end of this guide. Choose the city closest to you in a

north/south direction. This will provide the most accurate sunrise/sunset times.

To select a city location:

Select your country, state, and then city location.

1. Hold the CITY button for 5 seconds.

2. USA will flash next to the sunrise/sunset time.

3. Press and release the + or - button to select USA, CAN, or MEX as your country.

4. Press the CITY button to confirm the country and select a state.

5. Note: When either Canada or Mexico is chosen you will move directly to city selection.

6. The state will flash. Press and release the + or - button to select a state.

7. Press the CITY button to confirm the state and select a city.

8. The city location will flash.

9. Press and release the + or - button to select a city from the list at the end of this

manual.

10. Press the CITY button to confirm and exit.

After a short calculation time, the forecast station shows the times for sunrise and sunset, moon phase

and lunar tide.

Note: When DST is in affect the forecast station will need to receive the WWVB time signal to make the

adjustment for DST. The WWVB signal includes an embedded bit to tell the station to adjust for DST.

Until that signal is received the first time, the sunrise/sunset times will be one hour off.

TIDE:

The tides reflected on this station are based on the ebb and neap tides of the lunar month. Not daily high

and low tides. When the forecast station states high tide, the tides will be higher than usual, etc.

When the sun, moon and earth are lined up at new and full phases of the moon, tides will be higher.

When the moon is at right angles to the sun and Earth at the first and last quarter, the tides are weaker.

Full & new moon = spring tide (TIDE HI).

Quarter = neap tide (TIDE LO)

Other = mean water level (TIDE MID)

MOON PHASE:

The LCD Moon phase is divided by 6 sections, showing a total of 12 phases of the moon.

Note: With the moon shown against a light colored background, the phases will show opposite to a paper

calendar. The segments that are highlighted portray the part of the moon that is lit. For instance, the

moon will be blank during a new moon and dark during a full moon.

New Moon occurs when the moon is between the earth and sun so the illuminated portion of the moon is

on the back side facing the sun and we cannot see it. After a new moon, the illuminated (visible) portion

will increase or wax until the full moon occurs.

Full Moon occurs when the earth, moon, and sun are in approximate alignment, with the moon and the

sun on opposite sides of the earth. The illuminated portion of the moon faces the earth, giving us

complete visibility of one side of the entire moon. After a full moon, the illuminated portion will decrease or

wane until the new moon occurs.

First Quarter and Last Quarter moons occur when the moon is at a 90 degree angle to the earth and

sun. So we see half of the moon illuminated and half is in shadow.

Waxing means growing or expanding illumination and happens after a new moon.

Waning means decreasing illumination and occurs after a full moon.

Crescent refers to the moon being less than half illuminated. Crescents can be waning or waxing.

Gibbous describes a moon phase when more than half is illuminated. Gibbous can be waxing or

waning.

COMFORT STATEMENT: The comfort statement is based on the indoor humidity.

WET: Humidity is above 64%

COMFORTABLE: Humidity is between 43% and 64%

DRY: Humidity is below 42%

ALARMS: There are 9 different alarms that may be individually set on this forecast station:

Time Alarm #1

Time Alarm #2

Frost Alarm

High Temperature Alarm CH #1

Low Temperature Alarm CH #1

With additional TX14TH transmitters:

High Temperature Alarm CH #2

Low Temperature Alarm CH #2

High Temperature Alarm CH #3

Low Temperature Alarm CH #3

TIME ALARM: This forecast station has two individual time alarms: Press and release the ALARM button

to enter Alarm mode. Alarm 1 (A1) will show after the alarm time. Press and release the ALARM button

again and Alarm 2 (A2) will show after the alarm time.

SET TIME ALARM 1: Press and release the ALARM button once to enter Alarm mode. The Alarm Time

and A1 will show.

1. HOUR: Hold the ALARM button for 3 seconds. The Hour will flash. Use the + or - button to set the

Hour. Be sure to set the Hour correctly for AM or PM. Press and release the ALARM button once.

2. MINUTES: The Minutes will flash. Use the + or - button to set the Minutes. Press and release the

ALARM button once.

3. ACTIVATE: Press and release the ALARM button to enter the correct Alarm mode. Press and

release the +button and the alarm icon will appear (above the time, alarm 1, below the time,

alarm 2). The number in the bell icon indicates which alarm is active.

4. DEACTIVATE: Press and release the ALARM button to enter the correct Alarm mode. Press and

release the +button and the alarm icon(s) will disappear indicating alarm 1 and/or alarm 2 is off.

SET TIME ALARM 2: Press and release the ALARM button twice to enter Alarm mode. The Alarm Time

and A2 will show. Follow steps 1-4 above to program alarm 2.

SNOOZE: When either alarm 1 or alarm 2 sounds, press the SNOOZE/LIGHT button on the top of the

forecast station, once to activate the snooze feature for 10 minutes. The alarm icon and the snooze

icon Zz will flash when the snooze is active. Press any button to deactivate the snooze feature.

FROST ALARM: The Frost Alarm when active will sound when the outdoor temperature drops to

34°F (1.1 °C).

1. ACTIVATE: Press and release the TEMP ALERT button to activate the Frost Alarm on all channels

(when multiple transmitters in use). The Frost Alarm icon will appear in the outdoor temperature

area when active.

2. DEACTIVATE: Press and release the TEMP ALERT button until the Frost Alarm icon no longer

shows.

OUTDOOR TEMPERATURE ALARMS: A high and low outdoor temperature alarm may be set on the

forecast station.

Note: When multiple transmitters are connected on different channels, a high and/or low temperature

may be set for each channel.

SET TEMPERATURE ALARM CHANNEL 1:

1. Press and release the CH button to select channel 1 (when multiple transmitters in use).

2. Hold the TEMP ALERT button until the High Temp Alert icon appears and the temperature will

flash. Use the + or - button to select your High Temp alarm value. Press and release the SET button

to move to the Low Temp alarm.

3. The Low Temp Alert icon will appear and the temperature will flash. Use the + or - button to

select your Low Temp alarm value. Press and release the SET button to confirm and exit to current

temperature.

4. The Temp Alert icon will show in the outdoor temperature area when a temperature alarm is

active. When the temperature alarm sounds, the Temp Alert icon and the temperature value will

flash. Press any button to silence the alarm temporarily.

SET TEMPERATURE ALARM CHANNEL 2 or 3: Use the CH button to select the channel. Follow steps

2-4 above to set temperature alarms on other channels.

DEACTIVATE TEMPERATURE ALARM: Press and release the TEMP ALERT button 3 times to

deactivate all temperature alarms. The alert icons will disappear.

TEMPERATURE TREND ICONS:

The indoor and outdoor temperature trend indicators will update every 30 minutes or less. These trends

represent temperature changes over the past three hours.

Temperature rising more than 2°F /1°C in the past three hours

Temperature has not changed more than 2°F /1°C in the past three hours.

Temperature falling more than 2°F /1°C in the past three hours

The temperature trend indicators are shown next to the indoor temperature and outdoor temperature

readings.

CHANNELS-AUTO SCROLL:

Channels: The Forecast Station can receive up to 3 outdoor transmitters. Extra TX14TH sensors may

be found online or at your retailer to monitor remote temperature in up to 3 locations within a 200 ft.

wireless range of the forecast station. When more than one transmitter is used, set each transmitter

to a different channel number then hold the CH button for 5 second to search for the transmitters.

View Channels: press the CH button to select Ch1, Ch2, Ch3 or auto-channel scroll.

Auto scroll-channel will show a circling arrow below the channel number and will rotate through

each channel approximately every 5-8 seconds

Andere Handbücher für 308-1451

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology 513-149V2 Abmessungen

La Crosse Technology

La Crosse Technology WS-7213U Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX31U-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-7014CH-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA76669 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WD-3104U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS 9711 IT+ Installationsanleitung

La Crosse Technology

La Crosse Technology WS-9018U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9133BK-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9025U Handbuch

La Crosse Technology

La Crosse Technology 308-1416v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-1913U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88907V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C86234 Abmessungen

La Crosse Technology

La Crosse Technology WD-2513U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2316U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C79790-11 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1516U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX233RW Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85777v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-7091UD Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9014 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9009-IT Betriebsanleitung

La Crosse Technology

La Crosse Technology 308-1415BW Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung