La Crosse Technology WS-1913U-IT Bedienungsanleitung

Congratu

innovativ

speed, in

station wi

will disco

ations on pu

measuring

oor/outdoor

ll provide yo

er that the o

is product offe

WS-19

chasing this

echnique. F

temperature

with various

eration of y

13U-IT

Instru

state-of-the-

aturing time,

and outdoor

weather info

ur weather s

EATH

tion Ma

rt weather st

date, calend

umidity, air

mation and

tation is sim

STANT TRA

ireless trans

d developed

ANSMISSIO

5 seconds!) (

l your outdo

llow your cli

R CEN

ual

ation as an

r, weather f

ressure and

eather fore

le!

SMISSIO

ission techn

by LA CROS

offers you

.25 seconds

r data measu

atic variatio

TER

xample of e

recast, wind

rainfall (opti

ast. Pages a

the state-o

-t

logy, exclus

E TECHNOL

n immediate

for rain sens

red from the

s in real-tim

cellent desig

gust and wi

nal), this we

fter pages, y

e-art new

ively designe

GY. INSTA

pdate (ever

r - optional)

ransmitters:

and

ther

INVENTORY OF CONTENTS

1. Wireless Weather Station WS-1913U-IT

2. Wireless Thermo-hygro Sensor (TX31U-IT) and Wind Sensor (TX55U-IT) with mounting bracket.

3. Instruction Manual

FEATURES:

The Weather Station

Time display (manual setting)

12/24 hour time display

Calendar display (weekday, date, month)

Weather forecast icons and weather tendency indicator

Indoor temperature display in °C/ºF

Outdoor temperature display in °C/ºF

Outdoor Humidity display as RH%

Dew point displayed in °C or °F

Wind chill displayed in °C of °F

Wind gust displayed in km/h, mph or m/s

Wind speed displayed in km/h, mph or m/s

24-hour and total rainfall displayed in mm or inch (optional)

Display MIN/MAX value of outdoor temperature, outdoor humidity, dew point, wind chill, and relative

air pressure, with time & date of recording

Display MAX wind speed and gust with time & date of recording

Relative air pressure displayed in hPa or inHg

Air pressure tendency indicator for the past 12 hour (bar graph format)

Manual reset of outdoor temperature/ humidity, pressure and wind chill data

LCD contrast selectable

Low battery indicator

Storage of 140 sets of history weather data recorded in 3-hour intervals

Wireless transmission at 915 MHz

Transmission range up to 330 feet/100 meters

The Thermo-hygro Transmitter

Remote transmission of the outdoor temperature and humidity to the Weather Center at 915

MHz (open air)

Rain resistant casing

Wall mounting case (to be mounted vertically in a sheltered place. Avoid direct rain and

sunshine)

The Wind sensor

Connected to the thermo-hygro transmitter by cable

Can be installed onto a mast or a horizontal panel (with the cups on the

bottom)

The TX32U-IT rain sensor (optional- sold separately)

Function keys

LCD Battery

compartment

cover

SET UP:

IMPORT

- Do Not

NOTE:

When firs

system in

function

with the d

1. First,

trans

cord

“

2. Next,

sepa

“Ho

3. Then

into

up br

press

4. The

be bli

temp

after

5. The t

sens

135 s

Socket for

wind Wireless

transmission

MHz - thermo-

transmitter

weather sta

Weather

Ther

tra

NT:

Mix Old and

Mix Alkaline

t operating t

close proxi

efore mounti

isplay unit fo

unwind the c

itter by plu

“

clicks” into p

insert the ba

ately) See “

to install a

insert the ba

he Weather

efly. It will th

ure value. "-

eather Cen

nking to indi

rature, humi

35 seconds,

ansmit

er re

r data. It will

econds, you

t 915

hygro

ion

center

o-hygro

nsmitte



Remo



To be

New Batteri

, Standard,

e Weather S

ity (e.g. on a

g them at th

15 minutes

bles of the

ging the con

ace.

teries into th

ow to instal

d replace th

teries into th

enter”belo

n display th

-" will be sh

er will start r

ate that the

ity, wind da

remove the

eption icon i

stop blinking

ill need to s

ble connection

nsor and the th

e transmissi

mounted ont

r Recharge

ation, it is im

table 5ft-10f

eir final desti

efore moun

ind sensor.

ector head i

Thermo-hy

l and replac

e batteries i

Weather C

). Once the

time as 12:

wn for outd

ceiving data

tation is tryin

a will be dis

atteries fro

now blinkin

once the rai

tart again fro

etween the win

rmo-hygro

n of the rain

a horizonta

ble Batteri

portant to co

from display

nations (See

ing)

Connect the

to the sock

ro sensor a

the batteri

to the Rain

nter (See “H

batteries are

0, the date

or data.

from the tra

g to get the t

layed on the

all units. Yo

again to in

sensor has

step 2. (op

Wind s

all data to th

l panel

pletely set-

) and test all

Positioning

Wind sensor

t of the Ther

d Rain sens

s into the T

sensor (opt

ow to instal

installed, all

s 1.1.09, the

smitter. The

ermo-hygro

Weather Ce

u will have t

icate that th

been detect

tional rain g

Wir

wea

nsor

Rain sen

Weather C

p the wiring

components

elow) (Allow

to the Ther

o-hygro se

r (optional -

hermo-hygr

ional)” belo

and replac

segments of

weather ico

ransmission

transmitter d

ter. If this d

start again f

station is tr

d. If this doe

uge).

IONAL

less transmissi

– Rain sensor

ther station

or (optional)

nter at 915

and the rest

for correct

all sensors t

o-hygro

sor. Be sure

purchased

sensor“ an

the batteri

the LCD will

s, and air

reception ic

ata. The out

es not happ

om step 2.

ing to get th

not happen

n at 915

of the

sit

the

light

n will

oor

rain

after

6. Check the cable for correct connection and test all the components for correct functionality by

manually turning the wind-gauge; tilting the optional rain sensor to hear the impact of the internal

moving seesaw, etc. (See Positioning below).

7. Time and date must be manually set (See Manual Setting below).

8. After the Weather Center has been tested and found fit, the initial set up of the weather station

system is finished and the mounting of the system components can take place. Ensure that all

components work properly together at their chosen mounting or standing locations before permanent

mounting.

For example, if there appears to be problems with the 915 MHz radio transmissions, they can often

be overcome by slightly changing the mounting locations or turning the base station.

NOTE:

The radio communication between the receiver and the transmitters in the open field reaches distances of

up to 330 feet/ 100 meters, provided there are no interfering obstacles such as buildings, trees, vehicles,

high voltage lines, etc.

9. Radio interferences created by cordless phones, PC screens; radios or TV sets can in some cases

entirely cut off radio communication. Please consider this when choosing standing or mounting

locations.

NOTE:

After batteries are installed in the transmitter, install the batteries in the weather center to receive the

signal from the transmitters as soon as possible. If the weather center is powered more than 5 hours

after the transmitter is powered, the weather center will never receive signal successfully from the

transmitters. In this case, you will need to reinstall the batteries from all the transmitters to redo set-up

procedure.

After batteries are installed, there will be synchronization between Weather Center and the

transmitters. At this time, the signal reception icon will be blinking. When the signal is successfully

received by the Weather Center, the icon will be switched on (If it is not successful, the icon will

not be shown).

The short blinking of the icon shows that a reception is in progress.

If the signal reception is not successful on the first frequency (915MHz) for 45 seconds, the frequency

is changed to 920MHz and the learning is tried another 45 seconds. If still not successful, the

reception is tried for 45 seconds on 910MHz. This will also be done for re-synchronization.

HOW TO INSTALL AND REPLACE THE BATTERIES INTO THE THERMO-HYGRO TRANSMITTER

The outdoor Thermo-hygro transmitter works with 2 x AA IEC LR6, 1.5V batteries. To

install and replace the batteries, please follow the steps below:

1. Remove the airflow cover of the transmitter.

2. Remove the battery compartment cover.

3. Insert the batteries, observing the correct polarity (see the marking in the battery

compartment).

4. Replace the battery cover and the airflow cover onto the unit.

Transmitter signal

reception icon

NOTE:

When changing batteries in any of the units, all units need to be reset by following the setting up

procedures. This is because the thermo-hygro sensor at start-up assigns a random security code and this

code must be received and stored by the Weather Center in the first several minutes of power being

supplied to it.

HOW TO INSTALL AND REPLACE THE BATTERIES INTO THE WEATHER STATION

The Weather Station works with 2 x C, IEC LR14 1.5V batteries. When the batteries need to be replaced,

the low battery symbol will appear on the LCD.

To install and replace the batteries, please follow the steps below:

1. Remove the battery compartment cover.

2. Insert the batteries observing the correct polarity (see the marking

in the battery compartment).

3. Replace the battery cover.

HOW TO INSTALL AND REPLACE BATTERIES INTO THE RAIN SENSOR (OPTIONAL; SOLD

SEPERATELY)

1. Unlock the main cover from the rain sensor base and remove the cover.

2. Remove the battery cover at the top of the rain sensor.

3. Insert 2 x AAA IEC LR3 1.5V batteries into the battery compartment, observing the correct polarity.

4. Replace the battery cover and the main cover on the unit.

NOTE:

When changing batteries in any of the units, all units need to be reset by following the setting up

procedures. This is because the transmitter and rain sensor (optional) assign a random security code at

start-up and these codes must be received and stored by the Weather Station in the first 90 seconds of

power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units.

(For battery life information, see the Specifications section)

Please participate in the preservation of the environment. Return used batteries to an

authorised depot.

- Do Not Mix Old and New Batteries

- Do Not Mix Alkaline, Standard, or Rechargeable Batteries

NOTE:

The stored History record is lost when a battery change is completed on the weather station.

FUNCTION KEYS:

Weather Station:

The Weather Station has 4 easy-to-use function keys.

Figure 1

ure 2 Fi

ure 3

MIN/MAX key

SET ke

+key HISTORY ke

Air pressure

History histogram

SET key

Press and hold to enter manual setting modes: LCD contrast, Manual time setting, 12/24 hour time

display, Calendar setting, ºC/ ºF temperature unit, Wind speed unit, Rainfall unit, Pressure unit,

Relative pressure reference setting, Weather tendency threshold, Storm threshold setting

Press to toggle between Mode 1 and Mode 2:

- Mode1: "Wind speed + outdoor temp + rel. pressure"

- Mode 2: "Gust + Dew Point temp + rainfall data (only if there is a rain sensor- optional)"

(Mode 2 is shown for 30 seconds. Then it returns to the normal display)

Press to activate the reset mode when MAX or MIN record is shown

+ key

In display Mode 1, press to toggle between the display of date, weekday + date, Indoor temp, or

second

In display Mode 2, press to toggle between the display of Relative Pressure, 24 hour rainfall and Total

rainfall (only if there is a rain sensor- optional).

Press to adjust (increase) the level of different settings

Press to confirm to reset the MIN/MAX record

HISTORY key

Press to display the weather data history records

Press to exit manual setting mode

MIN/MAX key

Press to display MIN/MAX records of various weather data

Press to adjust (decrease) the level of different settings

LCD SCREEN

The LCD screen is split into 3 sections displaying the following information:

1. Time and date/ indoor temp/ second

2. Wind data, outdoor temperature and humidity, dew point, weather forecast icon and tendency

indicator

3. Air pressure history, relative air pressure, rainfall data (optional)

* When the signal from the transmitter/ or rain sensor (optional) is successfully received by the Weather

Station, this icon will be switched on. (If not successful, the icon will not be shown on the LCD). User can

therefore easily see whether the last reception was successful (“ON” icon) or not (“OFF” icon). On the

other hand, the short blinking of the icon shows that a reception is being done at that time.

Wind speed / gust** in mph,

km/h, m/s

Calendar / indoor

temperature / seconds

display

Weather tendency

Indicato

Time display

Outdoor relative

humidity in %

Weather forecast

Icon

Relative air pressure / 24 hr

rainfall / Total rainfall display*

(only if there is a rain sensor

being used)

Wind Chill in °C or °F

Low battery indicator

(

)

Transmitter signal

reception icon* Low battery indicator

*(transmitter)

Outdoor temperature

/ dew point**

In C or F

MIN/MAX icons HISTORY

icon Low battery indicato

(rain sensor - optional)

** In normal display mode, user may press the SET key to toggle between Mode1 and Mode 2 display:

Mode 1: Wind speed, outdoor temperature, relative air pressure are shown.

Mode 2: Wind gust, dew point, and rainfall (optional) reading are shown.

Note: To view the rainfall data, press the +key after entering Mode 2 display.

MANUAL SETTINGS:

The following manual settings can be changed once the SET key is pressed and held for about 3 seconds:

LCD contrast setting

Manual time setting

12/24 hour time display

Calendar setting

°C/ °F temperature unit setting

Wind speed unit

Rainfall unit setting

Air pressure unit setting

Relative pressure reference value setting

Weather tendency threshold value

Storm warning threshold value

LCD CONTRAST SETTING

The LCD contrast has 8 levels, from "LCD 1" to "LCD8" (default setting is LCD 5):

1. Press the SET key, the contrast level digit will flash.

2. Use the + or MIN/MAX key to adjust the level of contrast.

3. Confirm with the SET key and enter the MANUAL TIME SETTING.

Digit flashing

Wind speed icon

Outdoor temp

icon

Rel. Air Pressure icon

Wind gust icon

Dew point icon

In Mode 1, this reception icon is showing the condition of the reception of

the signal from Thermo-hygro transmitter

In Mode 2, this reception icon is showing the

condition of the reception of the signal from Rain

sensor (only if a rain sensor is being used).

Note: if no rain sensor is used, the reception icon

will always be displayed in Mode 2.

Rain icon

Year

"Month. Date." (for 12h time display)

"Date. Month." (for 24h time display)

MANUAL TIME SETTING:

You then may manually set the time by following the steps below:

1. The hour digit will flash.

2. Use the + or MIN/MAX key to set the hour.

3. Press the SET key to switch to the minutes. The minute digit will flash.

4. Use the + or MIN/MAX key to set the minutes (holding of the key will forward the digit by 5).

5. Confirm the time with the SET key and enter the 12/24-HOUR TIME DISPLAY SETTING.

12/24 HOUR TIME DISPLAY SETTING:

The time can be set to view as 12-hour or 24-hour format. The default time display mode is “12h”. To set

to “24h” time display:

1. Use the + or MIN/MAX key to toggle the value.

2. Confirm with the SET key and enter the CALENDAR SETTING.

CALENDAR SETTING:

The date default of the Weather Station is 1. 1. of year 2009. The date can be set manually by proceeding

as follows.

1. The year digit will flash.

2. Use the + or MIN/MAX key to set the year (pressing and holding the key will forward the digit by 5).

The range runs from "00" (2000) to "99" (2099).

3. Press the SET key to confirm the year and enter the month setting. The month digit will flash.

4. Use the + or MIN/MAX key to set the month.

5. Press the SET key to confirm the month and enter the date setting mode. The date digit will flash.

6. Use the + or MIN/MAX key to set the date.

7. Confirm all calendar settings with the SET key and enter the °C/°F TEMPERATURE UNIT SETTING.

°C/°F TEMPERATURE UNIT SETTING

The temperature display can be selected to show temperature data in °F or °C. (Default °F)

1. The temperature unit is flashing

2. Use the + or MIN/MAX key to toggle between “°F” or “°C”.

3. Confirm with the SET key and enter the WIND SPEED UNIT SETTING

WIND SPEED UNIT SETTING

Digit flashing

Flashin

Minutes Flashing

Hour Flashing

Flashing

The wind speed unit can be set as mph (mile per hour), km/h (Kilometer per hour), or m/s (meter per

second). The default unit is mph.

1. Use the + or MIN/MAX key to toggle between the unit “mph”, “km/h”, or “m/s”

2. Confirm with the SET key and enter the RAINFALL UNIT SETTING.

RAINFALL UNIT SETTING (OPTIONAL)

Note: the rain unit setting is only available if there is a rain sensor. Skip this setting by pressing the SET

key again to enter the Relative Air Pressure Unit Setting.

The total rainfall unit can be set as inch or mm. The default unit is inch.

1. Use the + or MIN/MAX key to toggle between the unit “mm” or “Inch”

2. Confirm the unit with the SET key and enter the RELATIVE AIR PRESSURE UNIT SETTING

RELATIVE AIR PRESSURE UNIT SETTING

The relative air pressure can be set as hPa of inHg. The default unit is inHg.

1. Use the + or MIN/MAX key to toggle between the unit “hPa" or “inHg”

2. Confirm the unit with the SET key and enter the RELATIVE PRESSURE REFERENCE VALUE

SETTING.

RELATIVE PRESSURE REFERENCE VALUE SETTING

NOTE:

The default reference pressure value of the barometer is 29.91inHg (1013 hPa) when batteries are first

inserted. For an exact measurement, it is necessary to first adjust the barometer to your local

relative air pressure (related to elevation above sea level). Ask for the current atmospheric pressure

of your home area (Local weather service, www, calibrated instruments in public buildings, airport).

The relative air pressure can be manually set to another value within the range of 27.14 to 31.90 inHg

(919 to 1080 hPa) for a better reference.

1. The current relative pressure value will flash.

2. Use the + or MIN/MAX key to increase or decrease the value. Keep holding the key will allow the

value to increase faster.

3. Confirm with the SET key and enter the WEATHER TENDENCY THRESHOLD VALUE SETTING.

NOTE:

This calibration facility is useful for those users living at various elevations above sea level, but wanting

their air pressure display to be based on sea level elevation.

WEATHER TENDENCY THRESHOLD VALUE SETTING

Flashing

You may

display o

selected,

1. The

2. Use

3. Con

STORM

You may

pressure

1. The

2. Use

3. Con

STORM

Note: th

pressing

TO EXIT

To exit th

wait for t

STORM

icon and

WEATH

Weather i

For every

represen

changed

displayed

sunny ico

select a defi

weather ico

the more se

hreshold val

he + or MIN

irm with the

ARNING T

also define a

rom .09 inH

hreshold val

he + or MIN

irm with the

LARM ON/

storm alar

the SET ke

HE MANU

manual set

e automatic

ARNING I

he down arr

R FORECA

cons in the t

sudden or si

the change i

r the chang

is a sun or r

n) or worse (

Sunny

ite switching

s. This repr

sitive the we

e will flash.

MAX key to

ET key and

RESHOLD

switching se

to .27 inHg

(

e will flash.

MAX key to

ET key and

FF SETTIN

ON/OFF s

L SETTING

ing anytime

imeout. The

ON: When t

w will flash.

T AND WE

TING ICON

ird section o

gnificant cha

n weather. If

has been t

ining cloud,

ith rainy ico

Clou

sensitivity v

sents the "s

ther foreca

elect the val

nter the ST

ALUE SET

sitivity valu

(

3-9 hPa) ov

elect the val

nter the ST

tting is not

MODE

uring the m

ode will ret

e storm-war

here is not

THER TEN

LCD can b

ge in the air

the icons do

o slow for th

here will be

) since the i

y with sunny i

lue, .06, .09,

nsitivity" of t

t). The defa

RM WARNI

ING

for the Stor

r 6 hours (D

RM ALAR

vailable on

nual setting

rn to the no

ing threshol

n audible al

ENCY

displayed in

pressure, th

not change,

Weather st

o change of

ons are alre

tervals

or .12 inHg (

e weather fo

lt value is 0.

NG THRES

warning di

fault 0.15 in

ON/ OFF S

this model.

odes, pres

mal time dis

is reached,

rm.

any of the fo

weather ic

hen it mean

tion to regist

icon if the w

ady at their e

Rainy

2-4 hPa) for

recast (the s

9 inHg (3 h

OLD VALU

play at a de

g (5 hPa)).

TTING.

kip and exi

the HISTO

lay.

you will see

llowing com

ns will updat

either the ai

er. However,

ather gets a

xtremes.

Flashing

he change i

aller the val

a).

SETTING.

rease of air

t this settin

Y key anyti

he cloud wit

inations:

accordingl

pressure h

if the icon

y better (wit

the

e or

rain

s not

Andere Handbücher für WS-1913U-IT

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology S84107 Abmessungen

La Crosse Technology

La Crosse Technology 79400 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9047UIT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9115TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7095U Bedienungsanleitung

La Crosse Technology

La Crosse Technology C85845 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-2010 Leitfaden

La Crosse Technology

La Crosse Technology WW85777v2 Installationsanleitung

La Crosse Technology

La Crosse Technology CA84688 Abmessungen

La Crosse Technology

La Crosse Technology WS-7034U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417BW Abmessungen

La Crosse Technology

La Crosse Technology TX2000 Discovery Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9151U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 9245 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1409BT Bedienungsanleitung

La Crosse Technology

La Crosse Technology T83646 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9730U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1516-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology S75617 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9013U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415BW Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415FCT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1710 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung