La Crosse Technology Family Weather Station Bedienungsanleitung

FAMILY WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an example of

excellent design and innovative measuring technique. Featuring time, date, calendar,

weather forecast, wind direction and speed, rainfall, outdoor temperature and outdoor

humidity, air pressure and various alarm settings for different weather conditions, this

weather station will provide you with various weather information and weather

forecast. Pages after pages, you will discover that the operation of your weather

station is really simple !

« Instant Transmission+» is the up and comin

state-o

-the-art

new wireless transmission technology, exclusively designed and

developed by LA CROSSE TECHNOLOGY.

“IT +” offers you an immediate update of all your outdoor data

measured from the transmitters : follow your climatic variations

in real-time!

FEATURES:

The Multifunctional Weather Station Foldout stand I

Battery

compartment

cover

Hanging hole

LCD

Function keys Foldout stand II

•Time display (manual setting)

•12/24 hour time display

•Calendar display (weekday, date, month, year)

•Time alarm function

•Weather forecasting function with 3 weather icons and weather tendency

indicator

•Outdoor temperature display in °C/ºF

•Outdoor Humidity display as RH%

•Max / Min value of outdoor temperature and humidity display with time & date

of recording

•Low/High outdoor temperature and humidity alarm

•Relative air pressure displayed in hPa or inHg

•Air pressure tendency indicator for the past 12 hour (bargraph format)

•LCD contrast selectable

•Low battery indicator

•Wind direction displayed in 16 steps

•Wind speed displayed in km/h, mph, m/s or Beaufort scale

•Windchill displayed in °C of °F

•Max wind speed displayed with time & date of recording

•High alarm function for wind speed

•Manual reset of outdoor temperature/ humidity, pressure and windchill data

•Total rainfall displayed in mm or inch

•Storm warning alarm

•Buzzer on/ off selectable

•Storage of 200 sets of history weather data recorded in 3-hour intervals

•Wireless transmission at 868 MHz

•Transmission range up to 100 metres (330 feet)

The Thermo-hygroTransmitter

•Remote transmission of the outdoor temperature and humidity

to the Weather Station at 868 MHz

•Showerproof casing

•Wall mounting case (to be mounted in a sheltered place. Avoid

direct rain and sunshine)

The Wind sensor

•Connected to the thermo-hygro transmitter by

cable

•Can be installed onto a mast or a horizontal panel

THE RAIN SENSOR

•Connected to the thermo-hygro transmitter by cable

•To be mounted onto a horizontal panel

SETTING UP:SETTING UP:

Cable connection

between the wind sensor

and the thermo-hygro

transmitter

Cable connection

between the rain sensor

and the thermo-hygro

transmitter

Wireless transmission at

868 MHz - thermo-hygro

transmitter to weather

station

Weather station

Wind sensor

Rain sensor

Note:Note:

When putting the Weather Station into operation, it is important to perform in close

proximity (e.g. on a table) a complete wiring and set-up of the system. This step is

important to test all components for correct function before placing and mounting

them at their final destinations (See Positioning below)

1. Unwind the cables of the Rain and the Wind sensors. Connect the Rain and

the Wind sensors to the Thermo-hygro transmitter by plugging the connector

heads of the two sensors into the appropriate sockets of the Thermo-hygro

transmitter.

2. First insert the batteries into the Thermo-hygro transmitter (see “How to install

and replace the batteries into the Thermo-hygro transmitter“ below).

Sockets for wind

and rain sensor

3. Then insert the batteries into the Weather Station (see “How to install and

replace the batteries into the Weather Station”below). Once the batteries

are installed, all segments of the LCD will light up briefly and a short signal

tone will be heard. It will then display the time as 0:00, the date as 1.1.05, the

weather icons, and air pressure value. "- - -" will be shown for outdoor data.

4. Afterwards, the Weather Station will start receiving data from the transmitter.

The outdoor temperature, humidity windchill and wind speed should then be

displayed on the Weather Station. If this does not happen after 30 seconds, the

batteries will need to be removed from both units. You will have to start again

from step 1.

5. You may then check all cables for correct connection and all components for

correct function by manually turning the wind-gauge, moving the weather-vane,

tilting the rain sensor to hear the impact of the internally moving seesaw, etc

(See Positioning below).

6. Time and date shall be manually set (See Manual Setting below).

7. After the Weather Station has been checked for correct function with regard to

the above points and found fit, the initial set up of the weather station system is

finished and the mounting of the system components can take place. It must

be ensured however that all components work properly together at their

chosen mounting or standing locations. If e.g. there appear to be problems with

the 868 MHz radio transmission, they can mostly be overcome by slightly

changing the mounting locations.

Note:

The radio communication between the receiver and the transmitter in the open field

reaches distances of max 100 metres, provided there are no interfering obstacles

such as buildings, trees, vehicles, high voltage lines, etc.

8. Radio interferences created by PC screens, radios or TV sets can in some

cases entirely cut off radio communication. Please take this into consideration

when choosing standing or mounting locations.

HOW TO INSTALL AND REPLACE THE BATTERIES INTO THE WEATHER

STATION

The Weather Station works with 3 x AA, IEC LR6, 1.5V batteries. When the batteries

need to be replaced, the low battery symbol will appear on the LCD.

To install and replace the batteries, please follow the steps below:

1. Remove the battery compartment

cover.

2. Insert the batteries observing the

correct polarity (see the marking in

the battery compartment).

3. Replace the battery cover.

HOW TO INSTALL AND REPLACE THE BATTERIES INTO THE THERMO-HYGRO

TRANSMITTER

The outdoor Thermo-hygro transmitter works with 2 x AA IEC LR6, 1.5V batteries. To

install and replace the batteries, please follow the steps below:

1. Uninstall the rain cover of the transmitter.

2. Remover the battery compartment cover.

3. Insert the batteries, observing the correct polarity (see

the marking in the battery compartment).

4. Replace the battery cover and the rain cover onto the

unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by

following the setting up procedures. This is because a random security code is

assigned by the transmitter at start-up and this code must be received and stored by

the Weather Station in the first 30 seconds of power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure

optimum accuracy of these units.

Please participate in the preservation of the environment. Return

used batteries to an authorised depot.

Note:

The stored History record will not be kept after the battery change is done on the

weather station.

FUNCTION KEYS:

Weather Station:

The Weather Station has 5 easy-to-use function keys.

MIN/MAX key

Set key

+ key

HISTORY key

ALARM key

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-7048U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-146W Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9077TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9400U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9029U Bedienungsanleitung

La Crosse Technology

La Crosse Technology V51 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 9245 Bedienungsanleitung

La Crosse Technology

La Crosse Technology V42-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology 328-1415 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-9009BK-IT Abmessungen

La Crosse Technology

La Crosse Technology Weather Direct WD-3303 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9002U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88907V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9630TWC-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology V42 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9119U Bedienungsanleitung

La Crosse Technology

La Crosse Technology SW403 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417BW Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9020U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7014U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9013U Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA79103 Abmessungen

La Crosse Technology

La Crosse Technology 308-1415BWV2 Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung